1####
2# kbuild: Generic definitions
3
4# Convenient variables
5comma   := ,
6quote   := "
7squote  := '
8empty   :=
9space   := $(empty) $(empty)
10space_escape := _-_SPACE_-_
11pound := \#
12
13###
14# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
15dot-target = $(dir $@).$(notdir $@)
16
17###
18# The temporary file to save gcc -MD generated dependencies must not
19# contain a comma
20depfile = $(subst $(comma),_,$(dot-target).d)
21
22###
23# filename of target with directory and extension stripped
24basetarget = $(basename $(notdir $@))
25
26###
27# filename of first prerequisite with directory and extension stripped
28baseprereq = $(basename $(notdir $<))
29
30###
31# Escape single quote for use in echo statements
32escsq = $(subst $(squote),'\$(squote)',$1)
33
34###
35# Easy method for doing a status message
36       kecho := :
37 quiet_kecho := echo
38silent_kecho := :
39kecho := $($(quiet)kecho)
40
41###
42# filechk is used to check if the content of a generated file is updated.
43# Sample usage:
44# define filechk_sample
45#	echo $KERNELRELEASE
46# endef
47# version.h : Makefile
48#	$(call filechk,sample)
49# The rule defined shall write to stdout the content of the new file.
50# The existing file will be compared with the new one.
51# - If no file exist it is created
52# - If the content differ the new file is used
53# - If they are equal no change, and no timestamp update
54# - stdin is piped in from the first prerequisite ($<) so one has
55#   to specify a valid file as first prerequisite (often the kbuild file)
56define filechk
57	$(Q)set -e;				\
58	mkdir -p $(dir $@);			\
59	$(filechk_$(1)) < $< > $@.tmp;		\
60	if [ -r $@ ] && cmp -s $@ $@.tmp; then	\
61		rm -f $@.tmp;			\
62	else					\
63		$(kecho) '  UPD     $@';	\
64		mv -f $@.tmp $@;		\
65	fi
66endef
67
68######
69# gcc support functions
70# See documentation in Documentation/kbuild/makefiles.txt
71
72# cc-cross-prefix
73# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
74# Return first prefix where a prefix$(CC) is found in PATH.
75# If no $(CC) found in PATH with listed prefixes return nothing
76cc-cross-prefix =  \
77	$(word 1, $(foreach c,$(1),                                   \
78		$(shell set -e;                                       \
79		if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \
80			echo $(c);                                    \
81		fi)))
82
83# output directory for tests below
84TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
85
86# try-run
87# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise)
88# Exit code chooses option. "$$TMP" is can be used as temporary file and
89# is automatically cleaned up.
90# modifed for U-Boot: prevent cc-option from leaving .*.su files
91try-run = $(shell set -e;		\
92	TMP="$(TMPOUT).$$$$.tmp";	\
93	TMPO="$(TMPOUT).$$$$.o";	\
94	TMPSU="$(TMPOUT).$$$$.su";	\
95	if ($(1)) >/dev/null 2>&1;	\
96	then echo "$(2)";		\
97	else echo "$(3)";		\
98	fi;				\
99	rm -f "$$TMP" "$$TMPO" "$$TMPSU")
100
101# as-option
102# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
103
104as-option = $(call try-run,\
105	$(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2))
106
107# as-instr
108# Usage: cflags-y += $(call as-instr,instr,option1,option2)
109
110as-instr = $(call try-run,\
111	printf "%b\n" "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3))
112
113# __cc-option
114# Usage: MY_CFLAGS += $(call __cc-option,$(CC),$(MY_CFLAGS),-march=winchip-c6,-march=i586)
115__cc-option = $(call try-run,\
116	$(1) -Werror $(2) $(3) -c -x c /dev/null -o "$$TMP",$(3),$(4))
117
118# cc-option
119# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
120cc-option = $(call __cc-option, $(CC),\
121	$(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS),$(1),$(2))
122
123# hostcc-option
124# Usage: cflags-y += $(call hostcc-option,-march=winchip-c6,-march=i586)
125hostcc-option = $(call __cc-option, $(HOSTCC),\
126	$(HOSTCFLAGS) $(HOST_EXTRACFLAGS),$(1),$(2))
127
128# cc-option-yn
129# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
130cc-option-yn = $(call try-run,\
131	$(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n)
132
133# cc-disable-warning
134# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable)
135cc-disable-warning = $(call try-run,\
136	$(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
137
138# cc-name
139# Expands to either gcc or clang
140cc-name = $(shell $(CC) -v 2>&1 | grep -q "clang version" && echo clang || echo gcc)
141
142# cc-version
143cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
144
145# cc-fullversion
146cc-fullversion = $(shell $(CONFIG_SHELL) \
147	$(srctree)/scripts/gcc-version.sh -p $(CC))
148
149# cc-ifversion
150# Usage:  EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
151cc-ifversion = $(shell [ $(cc-version) $(1) $(2) ] && echo $(3) || echo $(4))
152
153# added for U-Boot
154binutils-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/binutils-version.sh $(AS))
155
156# cc-ldoption
157# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both)
158cc-ldoption = $(call try-run,\
159	$(CC) $(1) $(KBUILD_CPPFLAGS) $(CC_OPTION_CFLAGS) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2))
160
161# ld-option
162# Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y)
163ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3))
164
165# ar-option
166# Usage: KBUILD_ARFLAGS := $(call ar-option,D)
167# Important: no spaces around options
168ar-option = $(call try-run, $(AR) rc$(1) "$$TMP",$(1),$(2))
169
170# ld-version
171# Note this is mainly for HJ Lu's 3 number binutil versions
172ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh)
173
174# ld-ifversion
175# Usage:  $(call ld-ifversion, -ge, 22252, y)
176ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4))
177
178######
179
180###
181# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
182# Usage:
183# $(Q)$(MAKE) $(build)=dir
184build := -f $(srctree)/scripts/Makefile.build obj
185
186###
187# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
188# Usage:
189# $(Q)$(MAKE) $(modbuiltin)=dir
190modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
191
192###
193# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
194# Usage:
195# $(Q)$(MAKE) $(dtbinst)=dir
196dtbinst := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.dtbinst obj
197
198###
199# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=
200# Usage:
201# $(Q)$(MAKE) $(clean)=dir
202clean := -f $(srctree)/scripts/Makefile.clean obj
203
204###
205# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.headersinst obj=
206# Usage:
207# $(Q)$(MAKE) $(hdr-inst)=dir
208hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
209
210# Prefix -I with $(srctree) if it is not an absolute path.
211# skip if -I has no parameter
212addtree = $(if $(patsubst -I%,%,$(1)), \
213$(if $(filter-out -I/% -I./% -I../%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1)),$(1)),$(1))
214
215# Find all -I options and call addtree
216flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
217
218# echo command.
219# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
220echo-cmd = $(if $($(quiet)cmd_$(1)),\
221	echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
222
223# printing commands
224cmd = @$(echo-cmd) $(cmd_$(1))
225
226# Add $(obj)/ for paths that are not absolute
227objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
228
229###
230# if_changed      - execute command if any prerequisite is newer than
231#                   target, or command line has changed
232# if_changed_dep  - as if_changed, but uses fixdep to reveal dependencies
233#                   including used config symbols
234# if_changed_rule - as if_changed but execute rule instead
235# See Documentation/kbuild/makefiles.txt for more info
236
237ifneq ($(KBUILD_NOCMDDEP),1)
238# Check if both arguments are the same including their order. Result is empty
239# string if equal. User may override this check using make KBUILD_NOCMDDEP=1
240arg-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
241                         $(subst $(space),$(space_escape),$(strip $(cmd_$1))))
242else
243arg-check = $(if $(strip $(cmd_$@)),,1)
244endif
245
246# Replace >$< with >$$< to preserve $ when reloading the .cmd file
247# (needed for make)
248# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file
249# (needed for make)
250# Replace >'< with >'\''< to be able to enclose the whole string in '...'
251# (needed for the shell)
252make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1)))))
253
254# Find any prerequisites that is newer than target or that does not exist.
255# PHONY targets skipped in both cases.
256any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
257
258# Execute command if command has changed or prerequisite(s) are updated.
259#
260if_changed = $(if $(strip $(any-prereq) $(arg-check)),                       \
261	@set -e;                                                             \
262	$(echo-cmd) $(cmd_$(1));                                             \
263	printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
264
265# Execute the command and also postprocess generated .d dependencies file.
266if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ),                  \
267	@set -e;                                                             \
268	$(echo-cmd) $(cmd_$(1));                                             \
269	scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
270	rm -f $(depfile);                                                    \
271	mv -f $(dot-target).tmp $(dot-target).cmd, @:)
272
273# Usage: $(call if_changed_rule,foo)
274# Will check if $(cmd_foo) or any of the prerequisites changed,
275# and if so will execute $(rule_foo).
276if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ),                 \
277	@set -e;                                                             \
278	$(rule_$(1)), @:)
279
280###
281# why - tell why a a target got build
282#       enabled by make V=2
283#       Output (listed in the order they are checked):
284#          (1) - due to target is PHONY
285#          (2) - due to target missing
286#          (3) - due to: file1.h file2.h
287#          (4) - due to command line change
288#          (5) - due to missing .cmd file
289#          (6) - due to target not in $(targets)
290# (1) PHONY targets are always build
291# (2) No target, so we better build it
292# (3) Prerequisite is newer than target
293# (4) The command line stored in the file named dir/.target.cmd
294#     differed from actual command line. This happens when compiler
295#     options changes
296# (5) No dir/.target.cmd file (used to store command line)
297# (6) No dir/.target.cmd file and target not listed in $(targets)
298#     This is a good hint that there is a bug in the kbuild file
299ifeq ($(KBUILD_VERBOSE),2)
300why =                                                                        \
301    $(if $(filter $@, $(PHONY)),- due to target is PHONY,                    \
302        $(if $(wildcard $@),                                                 \
303            $(if $(strip $(any-prereq)),- due to: $(any-prereq),             \
304                $(if $(arg-check),                                           \
305                    $(if $(cmd_$@),- due to command line change,             \
306                        $(if $(filter $@, $(targets)),                       \
307                            - due to missing .cmd file,                      \
308                            - due to $(notdir $@) not in $$(targets)         \
309                         )                                                   \
310                     )                                                       \
311                 )                                                           \
312             ),                                                              \
313             - due to target missing                                         \
314         )                                                                   \
315     )
316
317echo-why = $(call escsq, $(strip $(why)))
318endif
319
320# delete partially updated (i.e. corrupted) files on error
321.DELETE_ON_ERROR:
322
323# do not delete intermediate files automatically
324.SECONDARY:
325
326ifdef CONFIG_SPL_BUILD
327SPL_ := SPL_
328ifeq ($(CONFIG_TPL_BUILD),y)
329SPL_TPL_ := TPL_
330else
331SPL_TPL_ := SPL_
332endif
333else
334SPL_ :=
335SPL_TPL_ :=
336endif
337