1 // SPDX-License-Identifier: GPL-2.0+
2 /* Synopsys DesignWare 8250 library. */
3
4 #include <linux/bitops.h>
5 #include <linux/device.h>
6 #include <linux/io.h>
7 #include <linux/kernel.h>
8 #include <linux/serial_8250.h>
9 #include <linux/serial_core.h>
10
11 #include "8250_dwlib.h"
12
13 /* Offsets for the DesignWare specific registers */
14 #define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */
15 #define DW_UART_CPR 0xf4 /* Component Parameter Register */
16 #define DW_UART_UCV 0xf8 /* UART Component Version */
17
18 /* Component Parameter Register bits */
19 #define DW_UART_CPR_ABP_DATA_WIDTH (3 << 0)
20 #define DW_UART_CPR_AFCE_MODE (1 << 4)
21 #define DW_UART_CPR_THRE_MODE (1 << 5)
22 #define DW_UART_CPR_SIR_MODE (1 << 6)
23 #define DW_UART_CPR_SIR_LP_MODE (1 << 7)
24 #define DW_UART_CPR_ADDITIONAL_FEATURES (1 << 8)
25 #define DW_UART_CPR_FIFO_ACCESS (1 << 9)
26 #define DW_UART_CPR_FIFO_STAT (1 << 10)
27 #define DW_UART_CPR_SHADOW (1 << 11)
28 #define DW_UART_CPR_ENCODED_PARMS (1 << 12)
29 #define DW_UART_CPR_DMA_EXTRA (1 << 13)
30 #define DW_UART_CPR_FIFO_MODE (0xff << 16)
31
32 /* Helper for FIFO size calculation */
33 #define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16)
34
dw8250_readl_ext(struct uart_port * p,int offset)35 static inline u32 dw8250_readl_ext(struct uart_port *p, int offset)
36 {
37 if (p->iotype == UPIO_MEM32BE)
38 return ioread32be(p->membase + offset);
39 return readl(p->membase + offset);
40 }
41
dw8250_writel_ext(struct uart_port * p,int offset,u32 reg)42 static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg)
43 {
44 if (p->iotype == UPIO_MEM32BE)
45 iowrite32be(reg, p->membase + offset);
46 else
47 writel(reg, p->membase + offset);
48 }
49
50 /*
51 * divisor = div(I) + div(F)
52 * "I" means integer, "F" means fractional
53 * quot = div(I) = clk / (16 * baud)
54 * frac = div(F) * 2^dlf_size
55 *
56 * let rem = clk % (16 * baud)
57 * we have: div(F) * (16 * baud) = rem
58 * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud)
59 */
dw8250_get_divisor(struct uart_port * p,unsigned int baud,unsigned int * frac)60 static unsigned int dw8250_get_divisor(struct uart_port *p, unsigned int baud,
61 unsigned int *frac)
62 {
63 unsigned int quot, rem, base_baud = baud * 16;
64 struct dw8250_port_data *d = p->private_data;
65
66 quot = p->uartclk / base_baud;
67 rem = p->uartclk % base_baud;
68 *frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud);
69
70 return quot;
71 }
72
dw8250_set_divisor(struct uart_port * p,unsigned int baud,unsigned int quot,unsigned int quot_frac)73 static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
74 unsigned int quot, unsigned int quot_frac)
75 {
76 dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
77 serial8250_do_set_divisor(p, baud, quot, quot_frac);
78 }
79
dw8250_do_set_termios(struct uart_port * p,struct ktermios * termios,struct ktermios * old)80 void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, struct ktermios *old)
81 {
82 p->status &= ~UPSTAT_AUTOCTS;
83 if (termios->c_cflag & CRTSCTS)
84 p->status |= UPSTAT_AUTOCTS;
85
86 serial8250_do_set_termios(p, termios, old);
87 }
88 EXPORT_SYMBOL_GPL(dw8250_do_set_termios);
89
dw8250_setup_port(struct uart_port * p)90 void dw8250_setup_port(struct uart_port *p)
91 {
92 struct uart_8250_port *up = up_to_u8250p(p);
93 u32 reg;
94
95 /*
96 * If the Component Version Register returns zero, we know that
97 * ADDITIONAL_FEATURES are not enabled. No need to go any further.
98 */
99 reg = dw8250_readl_ext(p, DW_UART_UCV);
100 if (!reg)
101 return;
102
103 dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
104 (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
105
106 dw8250_writel_ext(p, DW_UART_DLF, ~0U);
107 reg = dw8250_readl_ext(p, DW_UART_DLF);
108 dw8250_writel_ext(p, DW_UART_DLF, 0);
109
110 if (reg) {
111 struct dw8250_port_data *d = p->private_data;
112
113 d->dlf_size = fls(reg);
114 p->get_divisor = dw8250_get_divisor;
115 p->set_divisor = dw8250_set_divisor;
116 }
117
118 reg = dw8250_readl_ext(p, DW_UART_CPR);
119 if (!reg)
120 return;
121
122 /* Select the type based on FIFO */
123 if (reg & DW_UART_CPR_FIFO_MODE) {
124 p->type = PORT_16550A;
125 p->flags |= UPF_FIXED_TYPE;
126 p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
127 up->capabilities = UART_CAP_FIFO;
128 }
129
130 if (reg & DW_UART_CPR_AFCE_MODE)
131 up->capabilities |= UART_CAP_AFE;
132
133 if (reg & DW_UART_CPR_SIR_MODE)
134 up->capabilities |= UART_CAP_IRDA;
135 }
136 EXPORT_SYMBOL_GPL(dw8250_setup_port);
137