/linux/drivers/pinctrl/ |
A D | pinctrl-xway.c | 124 MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), 178 static const unsigned pins_nmi[] = {GPIO8}; 224 static const unsigned pins_clkout0[] = {GPIO8}; 360 MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), 403 static const unsigned ase_pins_spi_di[] = {GPIO8}; 488 MFP_XWAY(GPIO8, GPIO, CGU, NMI, MII), 524 static const unsigned danube_pins_nmi[] = {GPIO8}; 663 MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), 725 static const unsigned xrx100_pins_nmi[] = {GPIO8}; 876 MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), [all …]
|
A D | pinctrl-lantiq.h | 114 GPIO8, enumerator
|
A D | pinctrl-falcon.c | 115 MFP_FALCON(GPIO8, MDIO, GPIO, NONE, NONE), 168 static const unsigned pins_mdio[] = {GPIO7, GPIO8};
|
/linux/drivers/media/usb/dvb-usb/ |
A D | dib07x0.h | 14 GPIO8 = 11, enumerator
|
/linux/arch/arm/boot/dts/ |
A D | bcm2837-rpi-cm3-io3.dts | 28 "GPIO8",
|
A D | bcm2835-rpi-cm1-io1.dts | 28 "GPIO8",
|
A D | nuvoton-npcm750-pincfg-evb.dtsi | 7 pins = "GPIO8/LKGPO1";
|
A D | keystone-k2l.dtsi | 187 * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
|
A D | nuvoton-npcm730-gsj-gpio.dtsi | 47 pins = "GPIO8/LKGPO1";
|
A D | nuvoton-npcm750-runbmc-olympus-pincfg.dtsi | 42 pins = "GPIO8/LKGPO1";
|
A D | imx6qdl-kontron-samx6i.dtsi | 488 MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b0 /* GPIO8 / CAN0_ERR# */
|
/linux/arch/arm/mach-pxa/ |
A D | mfp-pxa25x.h | 14 #define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0) 129 #define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
|
A D | mfp-pxa300.h | 212 #define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) 391 #define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT) 398 #define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT) 423 #define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5)
|
A D | pxa930.c | 31 MFP_ADDR(GPIO8, 0x0300),
|
A D | mfp-pxa320.h | 206 #define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) 222 #define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH) 451 #define GPIO8_NPWAIT MFP_CFG(GPIO8, AF3)
|
A D | mfp-pxa3xx.h | 20 #define GPIO8_GPIO MFP_CFG(GPIO8, AF0)
|
A D | mfp-pxa930.h | 129 #define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT) 150 #define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT)
|
/linux/arch/arm/mach-mmp/ |
A D | mfp-pxa168.h | 30 #define GPIO8_GPIO MFP_CFG(GPIO8, AF5) 155 #define GPIO8_DFI_D7 MFP_CFG(GPIO8, AF0) 207 #define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2)
|
A D | mfp-pxa910.h | 76 #define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
|
A D | mfp-mmp2.h | 21 #define GPIO8_GPIO MFP_CFG(GPIO8, AF0) 361 #define GPIO08_KP_MKIN4 MFP_CFG(GPIO8, AF1)
|
/linux/arch/arm64/boot/dts/bitmain/ |
A D | bm1880-sophon-edge.dts | 64 "[BM_TUSB_RST_L]", /* GPIO8 */
|
/linux/arch/arm64/boot/dts/freescale/ |
A D | fsl-ls1028a-kontron-sl28.dts | 240 "GPIO8", "GPIO9", "GPIO10", "GPIO11",
|
/linux/Documentation/devicetree/bindings/pinctrl/ |
A D | pinctrl-mt8195.yaml | 74 /* GPIO8 set as multifunction SDA0 */
|
A D | nuvoton,npcm7xx-pinctrl.txt | 46 "GPIO7/IOX2D0/SMB2DSCL", "GPIO8/LKGPO1", "GPIO9/LKGPO2", "GPIO10/IOXHLD",
|
/linux/drivers/mfd/ |
A D | db8500-prcmu.c | 329 IRQ_ENTRY(GPIO8)
|