1 /*
2  * Copyright (c) 2007-2011 Atheros Communications Inc.
3  * Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 #include "hif.h"
18 
19 #include <linux/export.h>
20 
21 #include "core.h"
22 #include "target.h"
23 #include "hif-ops.h"
24 #include "debug.h"
25 #include "trace.h"
26 
27 #define MAILBOX_FOR_BLOCK_SIZE          1
28 
29 #define ATH6KL_TIME_QUANTUM	10  /* in ms */
30 
ath6kl_hif_cp_scat_dma_buf(struct hif_scatter_req * req,bool from_dma)31 static int ath6kl_hif_cp_scat_dma_buf(struct hif_scatter_req *req,
32 				      bool from_dma)
33 {
34 	u8 *buf;
35 	int i;
36 
37 	buf = req->virt_dma_buf;
38 
39 	for (i = 0; i < req->scat_entries; i++) {
40 		if (from_dma)
41 			memcpy(req->scat_list[i].buf, buf,
42 			       req->scat_list[i].len);
43 		else
44 			memcpy(buf, req->scat_list[i].buf,
45 			       req->scat_list[i].len);
46 
47 		buf += req->scat_list[i].len;
48 	}
49 
50 	return 0;
51 }
52 
ath6kl_hif_rw_comp_handler(void * context,int status)53 int ath6kl_hif_rw_comp_handler(void *context, int status)
54 {
55 	struct htc_packet *packet = context;
56 
57 	ath6kl_dbg(ATH6KL_DBG_HIF, "hif rw completion pkt 0x%p status %d\n",
58 		   packet, status);
59 
60 	packet->status = status;
61 	packet->completion(packet->context, packet);
62 
63 	return 0;
64 }
65 EXPORT_SYMBOL(ath6kl_hif_rw_comp_handler);
66 
67 #define REGISTER_DUMP_COUNT     60
68 #define REGISTER_DUMP_LEN_MAX   60
69 
ath6kl_hif_dump_fw_crash(struct ath6kl * ar)70 static void ath6kl_hif_dump_fw_crash(struct ath6kl *ar)
71 {
72 	__le32 regdump_val[REGISTER_DUMP_LEN_MAX];
73 	u32 i, address, regdump_addr = 0;
74 	int ret;
75 
76 	/* the reg dump pointer is copied to the host interest area */
77 	address = ath6kl_get_hi_item_addr(ar, HI_ITEM(hi_failure_state));
78 	address = TARG_VTOP(ar->target_type, address);
79 
80 	/* read RAM location through diagnostic window */
81 	ret = ath6kl_diag_read32(ar, address, &regdump_addr);
82 
83 	if (ret || !regdump_addr) {
84 		ath6kl_warn("failed to get ptr to register dump area: %d\n",
85 			    ret);
86 		return;
87 	}
88 
89 	ath6kl_dbg(ATH6KL_DBG_IRQ, "register dump data address 0x%x\n",
90 		   regdump_addr);
91 	regdump_addr = TARG_VTOP(ar->target_type, regdump_addr);
92 
93 	/* fetch register dump data */
94 	ret = ath6kl_diag_read(ar, regdump_addr, (u8 *)&regdump_val[0],
95 				  REGISTER_DUMP_COUNT * (sizeof(u32)));
96 	if (ret) {
97 		ath6kl_warn("failed to get register dump: %d\n", ret);
98 		return;
99 	}
100 
101 	ath6kl_info("crash dump:\n");
102 	ath6kl_info("hw 0x%x fw %s\n", ar->wiphy->hw_version,
103 		    ar->wiphy->fw_version);
104 
105 	BUILD_BUG_ON(REGISTER_DUMP_COUNT % 4);
106 
107 	for (i = 0; i < REGISTER_DUMP_COUNT; i += 4) {
108 		ath6kl_info("%d: 0x%8.8x 0x%8.8x 0x%8.8x 0x%8.8x\n",
109 			    i,
110 			    le32_to_cpu(regdump_val[i]),
111 			    le32_to_cpu(regdump_val[i + 1]),
112 			    le32_to_cpu(regdump_val[i + 2]),
113 			    le32_to_cpu(regdump_val[i + 3]));
114 	}
115 }
116 
ath6kl_hif_proc_dbg_intr(struct ath6kl_device * dev)117 static int ath6kl_hif_proc_dbg_intr(struct ath6kl_device *dev)
118 {
119 	u32 dummy;
120 	int ret;
121 
122 	ath6kl_warn("firmware crashed\n");
123 
124 	/*
125 	 * read counter to clear the interrupt, the debug error interrupt is
126 	 * counter 0.
127 	 */
128 	ret = hif_read_write_sync(dev->ar, COUNT_DEC_ADDRESS,
129 				     (u8 *)&dummy, 4, HIF_RD_SYNC_BYTE_INC);
130 	if (ret)
131 		ath6kl_warn("Failed to clear debug interrupt: %d\n", ret);
132 
133 	ath6kl_hif_dump_fw_crash(dev->ar);
134 	ath6kl_read_fwlogs(dev->ar);
135 	ath6kl_recovery_err_notify(dev->ar, ATH6KL_FW_ASSERT);
136 
137 	return ret;
138 }
139 
140 /* mailbox recv message polling */
ath6kl_hif_poll_mboxmsg_rx(struct ath6kl_device * dev,u32 * lk_ahd,int timeout)141 int ath6kl_hif_poll_mboxmsg_rx(struct ath6kl_device *dev, u32 *lk_ahd,
142 			      int timeout)
143 {
144 	struct ath6kl_irq_proc_registers *rg;
145 	int status = 0, i;
146 	u8 htc_mbox = 1 << HTC_MAILBOX;
147 
148 	for (i = timeout / ATH6KL_TIME_QUANTUM; i > 0; i--) {
149 		/* this is the standard HIF way, load the reg table */
150 		status = hif_read_write_sync(dev->ar, HOST_INT_STATUS_ADDRESS,
151 					     (u8 *) &dev->irq_proc_reg,
152 					     sizeof(dev->irq_proc_reg),
153 					     HIF_RD_SYNC_BYTE_INC);
154 
155 		if (status) {
156 			ath6kl_err("failed to read reg table\n");
157 			return status;
158 		}
159 
160 		/* check for MBOX data and valid lookahead */
161 		if (dev->irq_proc_reg.host_int_status & htc_mbox) {
162 			if (dev->irq_proc_reg.rx_lkahd_valid &
163 			    htc_mbox) {
164 				/*
165 				 * Mailbox has a message and the look ahead
166 				 * is valid.
167 				 */
168 				rg = &dev->irq_proc_reg;
169 				*lk_ahd =
170 					le32_to_cpu(rg->rx_lkahd[HTC_MAILBOX]);
171 				break;
172 			}
173 		}
174 
175 		/* delay a little  */
176 		mdelay(ATH6KL_TIME_QUANTUM);
177 		ath6kl_dbg(ATH6KL_DBG_HIF, "hif retry mbox poll try %d\n", i);
178 	}
179 
180 	if (i == 0) {
181 		ath6kl_err("timeout waiting for recv message\n");
182 		status = -ETIME;
183 		/* check if the target asserted */
184 		if (dev->irq_proc_reg.counter_int_status &
185 		    ATH6KL_TARGET_DEBUG_INTR_MASK)
186 			/*
187 			 * Target failure handler will be called in case of
188 			 * an assert.
189 			 */
190 			ath6kl_hif_proc_dbg_intr(dev);
191 	}
192 
193 	return status;
194 }
195 
196 /*
197  * Disable packet reception (used in case the host runs out of buffers)
198  * using the interrupt enable registers through the host I/F
199  */
ath6kl_hif_rx_control(struct ath6kl_device * dev,bool enable_rx)200 int ath6kl_hif_rx_control(struct ath6kl_device *dev, bool enable_rx)
201 {
202 	struct ath6kl_irq_enable_reg regs;
203 	int status = 0;
204 
205 	ath6kl_dbg(ATH6KL_DBG_HIF, "hif rx %s\n",
206 		   enable_rx ? "enable" : "disable");
207 
208 	/* take the lock to protect interrupt enable shadows */
209 	spin_lock_bh(&dev->lock);
210 
211 	if (enable_rx)
212 		dev->irq_en_reg.int_status_en |=
213 			SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01);
214 	else
215 		dev->irq_en_reg.int_status_en &=
216 		    ~SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01);
217 
218 	memcpy(&regs, &dev->irq_en_reg, sizeof(regs));
219 
220 	spin_unlock_bh(&dev->lock);
221 
222 	status = hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS,
223 				     &regs.int_status_en,
224 				     sizeof(struct ath6kl_irq_enable_reg),
225 				     HIF_WR_SYNC_BYTE_INC);
226 
227 	return status;
228 }
229 
ath6kl_hif_submit_scat_req(struct ath6kl_device * dev,struct hif_scatter_req * scat_req,bool read)230 int ath6kl_hif_submit_scat_req(struct ath6kl_device *dev,
231 			      struct hif_scatter_req *scat_req, bool read)
232 {
233 	int status = 0;
234 
235 	if (read) {
236 		scat_req->req = HIF_RD_SYNC_BLOCK_FIX;
237 		scat_req->addr = dev->ar->mbox_info.htc_addr;
238 	} else {
239 		scat_req->req = HIF_WR_ASYNC_BLOCK_INC;
240 
241 		scat_req->addr =
242 			(scat_req->len > HIF_MBOX_WIDTH) ?
243 			dev->ar->mbox_info.htc_ext_addr :
244 			dev->ar->mbox_info.htc_addr;
245 	}
246 
247 	ath6kl_dbg(ATH6KL_DBG_HIF,
248 		   "hif submit scatter request entries %d len %d mbox 0x%x %s %s\n",
249 		   scat_req->scat_entries, scat_req->len,
250 		   scat_req->addr, !read ? "async" : "sync",
251 		   (read) ? "rd" : "wr");
252 
253 	if (!read && scat_req->virt_scat) {
254 		status = ath6kl_hif_cp_scat_dma_buf(scat_req, false);
255 		if (status) {
256 			scat_req->status = status;
257 			scat_req->complete(dev->ar->htc_target, scat_req);
258 			return 0;
259 		}
260 	}
261 
262 	status = ath6kl_hif_scat_req_rw(dev->ar, scat_req);
263 
264 	if (read) {
265 		/* in sync mode, we can touch the scatter request */
266 		scat_req->status = status;
267 		if (!status && scat_req->virt_scat)
268 			scat_req->status =
269 				ath6kl_hif_cp_scat_dma_buf(scat_req, true);
270 	}
271 
272 	return status;
273 }
274 
ath6kl_hif_proc_counter_intr(struct ath6kl_device * dev)275 static int ath6kl_hif_proc_counter_intr(struct ath6kl_device *dev)
276 {
277 	u8 counter_int_status;
278 
279 	ath6kl_dbg(ATH6KL_DBG_IRQ, "counter interrupt\n");
280 
281 	counter_int_status = dev->irq_proc_reg.counter_int_status &
282 			     dev->irq_en_reg.cntr_int_status_en;
283 
284 	ath6kl_dbg(ATH6KL_DBG_IRQ,
285 		   "valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n",
286 		counter_int_status);
287 
288 	/*
289 	 * NOTE: other modules like GMBOX may use the counter interrupt for
290 	 * credit flow control on other counters, we only need to check for
291 	 * the debug assertion counter interrupt.
292 	 */
293 	if (counter_int_status & ATH6KL_TARGET_DEBUG_INTR_MASK)
294 		return ath6kl_hif_proc_dbg_intr(dev);
295 
296 	return 0;
297 }
298 
ath6kl_hif_proc_err_intr(struct ath6kl_device * dev)299 static int ath6kl_hif_proc_err_intr(struct ath6kl_device *dev)
300 {
301 	int status;
302 	u8 error_int_status;
303 	u8 reg_buf[4];
304 
305 	ath6kl_dbg(ATH6KL_DBG_IRQ, "error interrupt\n");
306 
307 	error_int_status = dev->irq_proc_reg.error_int_status & 0x0F;
308 	if (!error_int_status) {
309 		WARN_ON(1);
310 		return -EIO;
311 	}
312 
313 	ath6kl_dbg(ATH6KL_DBG_IRQ,
314 		   "valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n",
315 		   error_int_status);
316 
317 	if (MS(ERROR_INT_STATUS_WAKEUP, error_int_status))
318 		ath6kl_dbg(ATH6KL_DBG_IRQ, "error : wakeup\n");
319 
320 	if (MS(ERROR_INT_STATUS_RX_UNDERFLOW, error_int_status))
321 		ath6kl_err("rx underflow\n");
322 
323 	if (MS(ERROR_INT_STATUS_TX_OVERFLOW, error_int_status))
324 		ath6kl_err("tx overflow\n");
325 
326 	/* Clear the interrupt */
327 	dev->irq_proc_reg.error_int_status &= ~error_int_status;
328 
329 	/* set W1C value to clear the interrupt, this hits the register first */
330 	reg_buf[0] = error_int_status;
331 	reg_buf[1] = 0;
332 	reg_buf[2] = 0;
333 	reg_buf[3] = 0;
334 
335 	status = hif_read_write_sync(dev->ar, ERROR_INT_STATUS_ADDRESS,
336 				     reg_buf, 4, HIF_WR_SYNC_BYTE_FIX);
337 
338 	WARN_ON(status);
339 
340 	return status;
341 }
342 
ath6kl_hif_proc_cpu_intr(struct ath6kl_device * dev)343 static int ath6kl_hif_proc_cpu_intr(struct ath6kl_device *dev)
344 {
345 	int status;
346 	u8 cpu_int_status;
347 	u8 reg_buf[4];
348 
349 	ath6kl_dbg(ATH6KL_DBG_IRQ, "cpu interrupt\n");
350 
351 	cpu_int_status = dev->irq_proc_reg.cpu_int_status &
352 			 dev->irq_en_reg.cpu_int_status_en;
353 	if (!cpu_int_status) {
354 		WARN_ON(1);
355 		return -EIO;
356 	}
357 
358 	ath6kl_dbg(ATH6KL_DBG_IRQ,
359 		   "valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n",
360 		cpu_int_status);
361 
362 	/* Clear the interrupt */
363 	dev->irq_proc_reg.cpu_int_status &= ~cpu_int_status;
364 
365 	/*
366 	 * Set up the register transfer buffer to hit the register 4 times ,
367 	 * this is done to make the access 4-byte aligned to mitigate issues
368 	 * with host bus interconnects that restrict bus transfer lengths to
369 	 * be a multiple of 4-bytes.
370 	 */
371 
372 	/* set W1C value to clear the interrupt, this hits the register first */
373 	reg_buf[0] = cpu_int_status;
374 	/* the remaining are set to zero which have no-effect  */
375 	reg_buf[1] = 0;
376 	reg_buf[2] = 0;
377 	reg_buf[3] = 0;
378 
379 	status = hif_read_write_sync(dev->ar, CPU_INT_STATUS_ADDRESS,
380 				     reg_buf, 4, HIF_WR_SYNC_BYTE_FIX);
381 
382 	WARN_ON(status);
383 
384 	return status;
385 }
386 
387 /* process pending interrupts synchronously */
proc_pending_irqs(struct ath6kl_device * dev,bool * done)388 static int proc_pending_irqs(struct ath6kl_device *dev, bool *done)
389 {
390 	struct ath6kl_irq_proc_registers *rg;
391 	int status = 0;
392 	u8 host_int_status = 0;
393 	u32 lk_ahd = 0;
394 	u8 htc_mbox = 1 << HTC_MAILBOX;
395 
396 	ath6kl_dbg(ATH6KL_DBG_IRQ, "proc_pending_irqs: (dev: 0x%p)\n", dev);
397 
398 	/*
399 	 * NOTE: HIF implementation guarantees that the context of this
400 	 * call allows us to perform SYNCHRONOUS I/O, that is we can block,
401 	 * sleep or call any API that can block or switch thread/task
402 	 * contexts. This is a fully schedulable context.
403 	 */
404 
405 	/*
406 	 * Process pending intr only when int_status_en is clear, it may
407 	 * result in unnecessary bus transaction otherwise. Target may be
408 	 * unresponsive at the time.
409 	 */
410 	if (dev->irq_en_reg.int_status_en) {
411 		/*
412 		 * Read the first 28 bytes of the HTC register table. This
413 		 * will yield us the value of different int status
414 		 * registers and the lookahead registers.
415 		 *
416 		 *    length = sizeof(int_status) + sizeof(cpu_int_status)
417 		 *             + sizeof(error_int_status) +
418 		 *             sizeof(counter_int_status) +
419 		 *             sizeof(mbox_frame) + sizeof(rx_lkahd_valid)
420 		 *             + sizeof(hole) + sizeof(rx_lkahd) +
421 		 *             sizeof(int_status_en) +
422 		 *             sizeof(cpu_int_status_en) +
423 		 *             sizeof(err_int_status_en) +
424 		 *             sizeof(cntr_int_status_en);
425 		 */
426 		status = hif_read_write_sync(dev->ar, HOST_INT_STATUS_ADDRESS,
427 					     (u8 *) &dev->irq_proc_reg,
428 					     sizeof(dev->irq_proc_reg),
429 					     HIF_RD_SYNC_BYTE_INC);
430 		if (status)
431 			goto out;
432 
433 		ath6kl_dump_registers(dev, &dev->irq_proc_reg,
434 				      &dev->irq_en_reg);
435 		trace_ath6kl_sdio_irq(&dev->irq_en_reg,
436 				      sizeof(dev->irq_en_reg));
437 
438 		/* Update only those registers that are enabled */
439 		host_int_status = dev->irq_proc_reg.host_int_status &
440 				  dev->irq_en_reg.int_status_en;
441 
442 		/* Look at mbox status */
443 		if (host_int_status & htc_mbox) {
444 			/*
445 			 * Mask out pending mbox value, we use "lookAhead as
446 			 * the real flag for mbox processing.
447 			 */
448 			host_int_status &= ~htc_mbox;
449 			if (dev->irq_proc_reg.rx_lkahd_valid &
450 			    htc_mbox) {
451 				rg = &dev->irq_proc_reg;
452 				lk_ahd = le32_to_cpu(rg->rx_lkahd[HTC_MAILBOX]);
453 				if (!lk_ahd)
454 					ath6kl_err("lookAhead is zero!\n");
455 			}
456 		}
457 	}
458 
459 	if (!host_int_status && !lk_ahd) {
460 		*done = true;
461 		goto out;
462 	}
463 
464 	if (lk_ahd) {
465 		int fetched = 0;
466 
467 		ath6kl_dbg(ATH6KL_DBG_IRQ,
468 			   "pending mailbox msg, lk_ahd: 0x%X\n", lk_ahd);
469 		/*
470 		 * Mailbox Interrupt, the HTC layer may issue async
471 		 * requests to empty the mailbox. When emptying the recv
472 		 * mailbox we use the async handler above called from the
473 		 * completion routine of the callers read request. This can
474 		 * improve performance by reducing context switching when
475 		 * we rapidly pull packets.
476 		 */
477 		status = ath6kl_htc_rxmsg_pending_handler(dev->htc_cnxt,
478 							  lk_ahd, &fetched);
479 		if (status)
480 			goto out;
481 
482 		if (!fetched)
483 			/*
484 			 * HTC could not pull any messages out due to lack
485 			 * of resources.
486 			 */
487 			dev->htc_cnxt->chk_irq_status_cnt = 0;
488 	}
489 
490 	/* now handle the rest of them */
491 	ath6kl_dbg(ATH6KL_DBG_IRQ,
492 		   "valid interrupt source(s) for other interrupts: 0x%x\n",
493 		   host_int_status);
494 
495 	if (MS(HOST_INT_STATUS_CPU, host_int_status)) {
496 		/* CPU Interrupt */
497 		status = ath6kl_hif_proc_cpu_intr(dev);
498 		if (status)
499 			goto out;
500 	}
501 
502 	if (MS(HOST_INT_STATUS_ERROR, host_int_status)) {
503 		/* Error Interrupt */
504 		status = ath6kl_hif_proc_err_intr(dev);
505 		if (status)
506 			goto out;
507 	}
508 
509 	if (MS(HOST_INT_STATUS_COUNTER, host_int_status))
510 		/* Counter Interrupt */
511 		status = ath6kl_hif_proc_counter_intr(dev);
512 
513 out:
514 	/*
515 	 * An optimization to bypass reading the IRQ status registers
516 	 * unecessarily which can re-wake the target, if upper layers
517 	 * determine that we are in a low-throughput mode, we can rely on
518 	 * taking another interrupt rather than re-checking the status
519 	 * registers which can re-wake the target.
520 	 *
521 	 * NOTE : for host interfaces that makes use of detecting pending
522 	 * mbox messages at hif can not use this optimization due to
523 	 * possible side effects, SPI requires the host to drain all
524 	 * messages from the mailbox before exiting the ISR routine.
525 	 */
526 
527 	ath6kl_dbg(ATH6KL_DBG_IRQ,
528 		   "bypassing irq status re-check, forcing done\n");
529 
530 	if (!dev->htc_cnxt->chk_irq_status_cnt)
531 		*done = true;
532 
533 	ath6kl_dbg(ATH6KL_DBG_IRQ,
534 		   "proc_pending_irqs: (done:%d, status=%d\n", *done, status);
535 
536 	return status;
537 }
538 
539 /* interrupt handler, kicks off all interrupt processing */
ath6kl_hif_intr_bh_handler(struct ath6kl * ar)540 int ath6kl_hif_intr_bh_handler(struct ath6kl *ar)
541 {
542 	struct ath6kl_device *dev = ar->htc_target->dev;
543 	unsigned long timeout;
544 	int status = 0;
545 	bool done = false;
546 
547 	/*
548 	 * Reset counter used to flag a re-scan of IRQ status registers on
549 	 * the target.
550 	 */
551 	dev->htc_cnxt->chk_irq_status_cnt = 0;
552 
553 	/*
554 	 * IRQ processing is synchronous, interrupt status registers can be
555 	 * re-read.
556 	 */
557 	timeout = jiffies + msecs_to_jiffies(ATH6KL_HIF_COMMUNICATION_TIMEOUT);
558 	while (time_before(jiffies, timeout) && !done) {
559 		status = proc_pending_irqs(dev, &done);
560 		if (status)
561 			break;
562 	}
563 
564 	return status;
565 }
566 EXPORT_SYMBOL(ath6kl_hif_intr_bh_handler);
567 
ath6kl_hif_enable_intrs(struct ath6kl_device * dev)568 static int ath6kl_hif_enable_intrs(struct ath6kl_device *dev)
569 {
570 	struct ath6kl_irq_enable_reg regs;
571 	int status;
572 
573 	spin_lock_bh(&dev->lock);
574 
575 	/* Enable all but ATH6KL CPU interrupts */
576 	dev->irq_en_reg.int_status_en =
577 			SM(INT_STATUS_ENABLE_ERROR, 0x01) |
578 			SM(INT_STATUS_ENABLE_CPU, 0x01) |
579 			SM(INT_STATUS_ENABLE_COUNTER, 0x01);
580 
581 	/*
582 	 * NOTE: There are some cases where HIF can do detection of
583 	 * pending mbox messages which is disabled now.
584 	 */
585 	dev->irq_en_reg.int_status_en |= SM(INT_STATUS_ENABLE_MBOX_DATA, 0x01);
586 
587 	/* Set up the CPU Interrupt status Register */
588 	dev->irq_en_reg.cpu_int_status_en = 0;
589 
590 	/* Set up the Error Interrupt status Register */
591 	dev->irq_en_reg.err_int_status_en =
592 		SM(ERROR_STATUS_ENABLE_RX_UNDERFLOW, 0x01) |
593 		SM(ERROR_STATUS_ENABLE_TX_OVERFLOW, 0x1);
594 
595 	/*
596 	 * Enable Counter interrupt status register to get fatal errors for
597 	 * debugging.
598 	 */
599 	dev->irq_en_reg.cntr_int_status_en = SM(COUNTER_INT_STATUS_ENABLE_BIT,
600 						ATH6KL_TARGET_DEBUG_INTR_MASK);
601 	memcpy(&regs, &dev->irq_en_reg, sizeof(regs));
602 
603 	spin_unlock_bh(&dev->lock);
604 
605 	status = hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS,
606 				     &regs.int_status_en, sizeof(regs),
607 				     HIF_WR_SYNC_BYTE_INC);
608 
609 	if (status)
610 		ath6kl_err("failed to update interrupt ctl reg err: %d\n",
611 			   status);
612 
613 	return status;
614 }
615 
ath6kl_hif_disable_intrs(struct ath6kl_device * dev)616 int ath6kl_hif_disable_intrs(struct ath6kl_device *dev)
617 {
618 	struct ath6kl_irq_enable_reg regs;
619 
620 	spin_lock_bh(&dev->lock);
621 	/* Disable all interrupts */
622 	dev->irq_en_reg.int_status_en = 0;
623 	dev->irq_en_reg.cpu_int_status_en = 0;
624 	dev->irq_en_reg.err_int_status_en = 0;
625 	dev->irq_en_reg.cntr_int_status_en = 0;
626 	memcpy(&regs, &dev->irq_en_reg, sizeof(regs));
627 	spin_unlock_bh(&dev->lock);
628 
629 	return hif_read_write_sync(dev->ar, INT_STATUS_ENABLE_ADDRESS,
630 				   &regs.int_status_en, sizeof(regs),
631 				   HIF_WR_SYNC_BYTE_INC);
632 }
633 
634 /* enable device interrupts */
ath6kl_hif_unmask_intrs(struct ath6kl_device * dev)635 int ath6kl_hif_unmask_intrs(struct ath6kl_device *dev)
636 {
637 	int status = 0;
638 
639 	/*
640 	 * Make sure interrupt are disabled before unmasking at the HIF
641 	 * layer. The rationale here is that between device insertion
642 	 * (where we clear the interrupts the first time) and when HTC
643 	 * is finally ready to handle interrupts, other software can perform
644 	 * target "soft" resets. The ATH6KL interrupt enables reset back to an
645 	 * "enabled" state when this happens.
646 	 */
647 	ath6kl_hif_disable_intrs(dev);
648 
649 	/* unmask the host controller interrupts */
650 	ath6kl_hif_irq_enable(dev->ar);
651 	status = ath6kl_hif_enable_intrs(dev);
652 
653 	return status;
654 }
655 
656 /* disable all device interrupts */
ath6kl_hif_mask_intrs(struct ath6kl_device * dev)657 int ath6kl_hif_mask_intrs(struct ath6kl_device *dev)
658 {
659 	/*
660 	 * Mask the interrupt at the HIF layer to avoid any stray interrupt
661 	 * taken while we zero out our shadow registers in
662 	 * ath6kl_hif_disable_intrs().
663 	 */
664 	ath6kl_hif_irq_disable(dev->ar);
665 
666 	return ath6kl_hif_disable_intrs(dev);
667 }
668 
ath6kl_hif_setup(struct ath6kl_device * dev)669 int ath6kl_hif_setup(struct ath6kl_device *dev)
670 {
671 	int status = 0;
672 
673 	spin_lock_init(&dev->lock);
674 
675 	/*
676 	 * NOTE: we actually get the block size of a mailbox other than 0,
677 	 * for SDIO the block size on mailbox 0 is artificially set to 1.
678 	 * So we use the block size that is set for the other 3 mailboxes.
679 	 */
680 	dev->htc_cnxt->block_sz = dev->ar->mbox_info.block_size;
681 
682 	/* must be a power of 2 */
683 	if ((dev->htc_cnxt->block_sz & (dev->htc_cnxt->block_sz - 1)) != 0) {
684 		WARN_ON(1);
685 		status = -EINVAL;
686 		goto fail_setup;
687 	}
688 
689 	/* assemble mask, used for padding to a block */
690 	dev->htc_cnxt->block_mask = dev->htc_cnxt->block_sz - 1;
691 
692 	ath6kl_dbg(ATH6KL_DBG_HIF, "hif block size %d mbox addr 0x%x\n",
693 		   dev->htc_cnxt->block_sz, dev->ar->mbox_info.htc_addr);
694 
695 	status = ath6kl_hif_disable_intrs(dev);
696 
697 fail_setup:
698 	return status;
699 }
700