/linux/drivers/accessibility/speakup/ |
A D | serialio.c | 96 outb(UART_MCR_DTR | UART_MCR_RTS, ser->port + UART_MCR); in spk_serial_init() 142 speakup_info.port_tts + UART_MCR); in start_serial_interrupt() 167 int old = inb(speakup_info.port_tts + UART_MCR); in spk_serial_tiocmset() 169 outb((old & ~clear) | set, speakup_info.port_tts + UART_MCR); in spk_serial_tiocmset()
|
/linux/sound/drivers/ |
A D | serial-u16550.c | 406 ,uart->base + UART_MCR); /* Modem Control Register */ in snd_uart16550_do_open() 413 uart->base + UART_MCR); in snd_uart16550_do_open() 419 uart->base + UART_MCR); in snd_uart16550_do_open() 466 ,uart->base + UART_MCR); /* Modem Control Register */ in snd_uart16550_do_close() 473 uart->base + UART_MCR); in snd_uart16550_do_close() 479 uart->base + UART_MCR); in snd_uart16550_do_close() 806 outb(UART_MCR_RTS | (0&UART_MCR_DTR), uart->base + UART_MCR); in snd_uart16550_create() 811 outb(UART_MCR_RTS | UART_MCR_DTR, uart->base + UART_MCR); in snd_uart16550_create()
|
/linux/drivers/ssb/ |
A D | driver_extif.c | 46 save_mcr = regs[UART_MCR]; in serial_exists() 47 regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS); in serial_exists() 50 regs[UART_MCR] = save_mcr; in serial_exists()
|
/linux/arch/powerpc/kernel/ |
A D | udbg_16550.c | 21 #define UART_MCR 4 macro 119 udbg_uart_out(UART_MCR, 0x3); in udbg_uart_setup() 140 if (udbg_uart_in(UART_MCR) & 0x80) in udbg_probe_uart_speed()
|
/linux/drivers/tty/ |
A D | mxser.c | 386 oldmcr = inb(io + UART_MCR); in mxser_must_get_hwid() 387 outb(0, io + UART_MCR); in mxser_must_get_hwid() 389 if ((hwid = inb(io + UART_MCR)) != 0) { in mxser_must_get_hwid() 390 outb(oldmcr, io + UART_MCR); in mxser_must_get_hwid() 462 mcr = inb(mp->ioaddr + UART_MCR); in mxser_dtr_rts() 467 outb(mcr, mp->ioaddr + UART_MCR); in mxser_dtr_rts() 504 outb(info->MCR, info->ioaddr + UART_MCR); in mxser_set_baud() 507 outb(info->MCR, info->ioaddr + UART_MCR); in mxser_set_baud() 640 outb(info->MCR, info->ioaddr + UART_MCR); in mxser_change_speed() 773 outb(info->MCR, info->ioaddr + UART_MCR); in mxser_activate() [all …]
|
/linux/drivers/tty/serial/8250/ |
A D | 8250_em.c | 36 case UART_MCR: /* MCR @ 0x14 (+1) */ in serial8250_em_serial_out() 54 case UART_MCR: /* MCR @ 0x14 (+1) */ in serial8250_em_serial_in()
|
A D | 8250_ingenic.c | 119 early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR); in ingenic_early_console_setup() 165 case UART_MCR: in ingenic_uart_serial_out() 197 case UART_MCR: in ingenic_uart_serial_in()
|
A D | 8250.h | 222 serial_out(up, UART_MCR, value); in serial8250_out_MCR() 232 mctrl = serial_in(up, UART_MCR); in serial8250_in_MCR()
|
A D | 8250_uniphier.c | 79 case UART_MCR: in uniphier_serial_in() 113 case UART_MCR: in uniphier_serial_out()
|
A D | 8250_bcm7271.c | 803 mcr = serial_port_in(p, UART_MCR); in brcmuart_handle_irq() 805 serial_port_out(p, UART_MCR, mcr); in brcmuart_handle_irq() 852 status = serial_port_in(p, UART_MCR); in brcmuart_hrtimer_func() 854 serial_port_out(p, UART_MCR, status); in brcmuart_hrtimer_func()
|
A D | 8250_early.c | 145 serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */ in init_port()
|
A D | 8250_dw.c | 356 unsigned int mcr = p->serial_in(p, UART_MCR); in dw8250_set_ldisc() 364 p->serial_out(p, UART_MCR, mcr); in dw8250_set_ldisc()
|
/linux/drivers/bluetooth/ |
A D | dtl1_cs.c | 472 outb(0, iobase + UART_MCR); in dtl1_open() 479 outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); in dtl1_open() 518 outb(0, iobase + UART_MCR); in dtl1_close()
|
/linux/drivers/media/rc/ |
A D | serial_ir.c | 163 soutp(UART_MCR, hardware[type].off); in on() 165 soutp(UART_MCR, hardware[type].on); in on() 171 soutp(UART_MCR, hardware[type].on); in off() 173 soutp(UART_MCR, hardware[type].off); in off()
|
/linux/drivers/usb/serial/ |
A D | ssu100.c | 151 result = ssu100_setregister(dev, 0, UART_MCR, urb_value); in update_mctrl() 373 r = ssu100_getregister(dev, 0, UART_MCR, d); in ssu100_tiocmget() 408 if (ssu100_setregister(dev, 0, UART_MCR, 0) < 0) in ssu100_dtr_rts()
|
A D | ark3116.c | 149 ark3116_write_reg(serial, UART_MCR, 0); in ark3116_port_probe() 443 ark3116_write_reg(port->serial, UART_MCR, priv->mcr); in ark3116_tiocmset()
|
A D | quatech2.c | 236 status = qt2_setregister(dev, port_priv->device_port, UART_MCR, in update_mctrl() 737 r = qt2_getregister(dev, port_priv->device_port, UART_MCR, d); in qt2_tiocmget() 795 UART_MCR, 0) < 0) in qt2_dtr_rts()
|
/linux/arch/powerpc/boot/ |
A D | ns16550.c | 24 #define UART_MCR 4 /* Out: Modem Control Register */ macro
|
/linux/drivers/tty/serial/ |
A D | omap-serial.c | 654 old_mcr = serial_in(up, UART_MCR); in serial_omap_set_mctrl() 658 serial_out(up, UART_MCR, up->mcr); in serial_omap_set_mctrl() 923 up->mcr = serial_in(up, UART_MCR) & ~UART_MCR_TCRTLR; in serial_omap_set_termios() 924 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); in serial_omap_set_termios() 953 serial_out(up, UART_MCR, up->mcr); in serial_omap_set_termios() 1002 serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); in serial_omap_set_termios() 1050 serial_out(up, UART_MCR, up->mcr); in serial_omap_set_termios() 1772 serial_out(up, UART_MCR, up->mcr); in serial_omap_restore_context()
|
A D | serial-tegra.c | 202 tegra_uart_write(tup, mcr, UART_MCR); in set_rts() 217 tegra_uart_write(tup, mcr, UART_MCR); in set_dtr() 232 tegra_uart_write(tup, mcr, UART_MCR); in set_loopbk() 951 mcr = tegra_uart_read(tup, UART_MCR); in tegra_uart_hw_deinit() 963 mcr = tegra_uart_read(tup, UART_MCR); in tegra_uart_hw_deinit() 1370 tegra_uart_write(tup, tup->mcr_shadow, UART_MCR); in tegra_uart_set_termios() 1377 tegra_uart_write(tup, tup->mcr_shadow, UART_MCR); in tegra_uart_set_termios()
|
A D | sunsu.c | 132 if (offset == UART_MCR) in serial_out() 593 serial_out(up, UART_MCR, mcr); in sunsu_set_mctrl() 1071 save_mcr = serial_in(up, UART_MCR); in sunsu_autoconfig() 1084 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); in sunsu_autoconfig() 1086 serial_outp(up, UART_MCR, save_mcr); in sunsu_autoconfig() 1169 serial_outp(up, UART_MCR, save_mcr); in sunsu_autoconfig()
|
/linux/arch/sh/include/asm/ |
A D | smc37c93x.h | 63 #define UART_MCR 0x8 /* MODEM Control Register */ macro
|
/linux/arch/powerpc/platforms/embedded6xx/ |
A D | ls_uart.c | 67 out_8(avr_addr + UART_MCR, 0); in avr_uart_configure()
|
/linux/include/uapi/linux/ |
A D | serial_reg.h | 122 #define UART_MCR 4 /* Out: Modem Control Register */ macro
|
/linux/samples/vfio-mdev/ |
A D | mtty.c | 427 case UART_MCR: in handle_bar_write() 532 (mdev_state->s[index].uart_reg[UART_MCR] & in handle_bar_read() 547 case UART_MCR: in handle_bar_read() 579 if (mdev_state->s[index].uart_reg[UART_MCR] & in handle_bar_read()
|