/linux/Documentation/hwmon/ |
A D | amc6821.rst | 70 0 degree C to 124 degree C in steps of 71 4 degree C. Read it out after writing to get 80 temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and 87 0 degree C to 124 degree C in steps 88 of 4 degree C.
|
A D | nct7904.rst | 38 temp1_input Local temperature (1/1000 degree, 39 0.125 degree resolution) 41 temp[2-9]_input CPU temperatures (1/1000 degree, 42 0.125 degree resolution)
|
A D | tmp102.rst | 23 sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0 24 degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
|
A D | ds1621.rst | 67 degree Celsius to +125 in 0.5 increments. You may convert this into a 83 1.0 degree Celsius to avoid Tout "bouncing", though! 125 - DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees) 126 - DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees) 127 - DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees) 128 - DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees) 129 - DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees)
|
A D | sht21.rst | 40 0.2 degree Celsius) compared with the SHT21 (2.0% relative humidity, 41 0.3 degree Celsius). 63 humidity and 66 ms for temperature. To keep self heating below 0.1 degree
|
A D | tmp401.rst | 59 Celsius. Resolution of the remote sensor is 0.0625 degree. Local 60 sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not 62 degree).
|
A D | xgene-hwmon.rst | 19 - SoC on-die temperature in milli-degree C 30 - SoC on-die temperature (milli-degree C)
|
A D | adm1031.rst | 37 degree for the local temperature, 0.125 degree for the remote temperatures.
|
A D | ds620.rst | 24 into non-volatile on-chip registers). Temperature range is -55 degree Celsius 25 to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value
|
A D | tmp108.rst | 27 degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
|
A D | tmp513.rst | 35 -40 to + 125 degrees with a resolution of 0.0625 degree C. 40 0 to 127.5 degrees with a resolution of 0.5 degree.
|
A D | tc74.rst | 17 The tc74 has an 8-bit sensor, with 1 degree centigrade resolution
|
A D | max6642.rst | 27 is 0.25 degree for the local temperature and for the remote temperature.
|
A D | lm63.rst | 64 degree for the local temperature, 0.125 degree for the remote temperature.
|
A D | max1619.rst | 27 is 1.0 degree for the local temperature and for the remote temperature.
|
/linux/Documentation/driver-api/thermal/ |
A D | exynos_thermal.rst | 40 Trimming info for 25 degree Celsius (stored at TRIMINFO register) 41 Temperature code measured at 25 degree Celsius which is unchanged 43 Trimming info for 85 degree Celsius (stored at TRIMINFO register) 44 Temperature code measured at 85 degree Celsius which is unchanged
|
/linux/drivers/mtd/nand/raw/atmel/ |
A D | pmecc.c | 223 unsigned int poly, degree, table_size; in atmel_pmecc_create_gf_tables() local 227 degree = PMECC_GF_DIMENSION_13; in atmel_pmecc_create_gf_tables() 231 degree = PMECC_GF_DIMENSION_14; in atmel_pmecc_create_gf_tables() 245 ret = atmel_pmecc_build_gf_tables(degree, poly, gf_tables); in atmel_pmecc_create_gf_tables() 448 int degree = get_sectorsize(user) == 512 ? 13 : 14; in atmel_pmecc_substitute() local 449 int cw_len = BIT(degree) - 1; in atmel_pmecc_substitute() 468 for (j = 0; j < degree; j++) { in atmel_pmecc_substitute() 494 int degree = get_sectorsize(user) == 512 ? 13 : 14; in atmel_pmecc_get_sigma() local 495 int cw_len = BIT(degree) - 1; in atmel_pmecc_get_sigma() 644 int degree = sector_size == 512 ? 13 : 14; in atmel_pmecc_err_location() local [all …]
|
/linux/Documentation/devicetree/bindings/power/supply/ |
A D | battery.yaml | 89 An array providing the temperature in degree Celsius 96 An array containing the temperature in degree Celsius, 158 /* table for -10 degree Celsius */ 160 /* table for 0 degree Celsius */ 162 /* table for 10 degree Celsius */
|
A D | maxim,max17042.yaml | 41 Temperature threshold to report battery as cold (in tenths of degree Celsius). 47 Temperature threshold to report battery as over heated (in tenths of degree Celsius).
|
A D | charger-manager.yaml | 90 description: critical cold temperature of battery for charging in deci-degree celsius 98 description: critical hot temperature of battery for charging in deci-degree celsius 102 description: temperature difference to allow recharging in deci-degree celsius
|
/linux/Documentation/devicetree/bindings/spi/ |
A D | spi-samsung.txt | 66 - 1: 90 degree phase shift sampling. 67 - 2: 180 degree phase shift sampling. 68 - 3: 270 degree phase shift sampling.
|
/linux/Documentation/devicetree/bindings/net/dsa/ |
A D | nxp,sja1105.yaml | 106 the phase between 1640 ps (73.8 degree shift at 1Gbps) and 2260 ps 107 (101.7 degree shift) in increments of 0.9 degrees (20 ps).
|
/linux/mm/ |
A D | rmap.c | 93 anon_vma->degree = 1; /* Reference for first vma */ in anon_vma_alloc() 211 anon_vma->degree++; in __anon_vma_prepare() 304 anon_vma != src->anon_vma && anon_vma->degree < 2) in anon_vma_clone() 308 dst->anon_vma->degree++; in anon_vma_clone() 378 anon_vma->parent->degree++; in anon_vma_fork() 410 anon_vma->parent->degree--; in unlink_anon_vmas() 418 vma->anon_vma->degree--; in unlink_anon_vmas() 436 VM_WARN_ON(anon_vma->degree); in unlink_anon_vmas()
|
/linux/Documentation/devicetree/bindings/sound/ |
A D | rt1011.txt | 26 u32. The temperature was measured while doing the calibration. Units: Celsius degree
|
/linux/drivers/net/phy/ |
A D | nxp-c45-tja11xx.c | 892 u64 degree; in nxp_c45_set_delays() local 896 degree = div_u64(tx_delay, PS_PER_DEGREE); in nxp_c45_set_delays() 898 ID_ENABLE | nxp_c45_get_phase_shift(degree)); in nxp_c45_set_delays() 906 degree = div_u64(rx_delay, PS_PER_DEGREE); in nxp_c45_set_delays() 908 ID_ENABLE | nxp_c45_get_phase_shift(degree)); in nxp_c45_set_delays()
|