/linux/Documentation/filesystems/spufs/ |
A D | spufs.rst | 87 If a count smaller than four is requested, read returns -1 and 90 When data has been read successfully, four bytes are placed in 91 the data buffer and the value four is returned. 101 If a count smaller than four is requested, read returns -1 and 109 When data has been read successfully, four bytes are placed in 110 the data buffer and the value four is returned. 122 four is requested, write returns -1 and sets errno to EINVAL. If there 130 fully, four bytes are placed in the data buffer and the value four is 146 If a count smaller than four is requested, read returns -1 and 147 sets errno to EINVAL. Otherwise, a four byte value is placed in [all …]
|
/linux/lib/ |
A D | test_stackinit.c | 139 zero.four = 0; \ 156 .four = 0, \ 162 .four = arg->four, \ 168 var.four = 0 307 unsigned long four; member 316 unsigned long four; member 325 u8 four __aligned(64); 332 char four; member 341 unsigned long four; member
|
/linux/Documentation/hwmon/ |
A D | ntc_thermistor.rst | 37 and four circuit models with an option not to use any of the four models. 44 The four circuit models provided are: 94 When one of the four circuit models is used, read_uV, pullup_uV, pullup_ohm, 95 pulldown_ohm, and connect should be provided. When none of the four models
|
A D | lm83.rst | 37 will be reported instead of four. 72 are sufficient, and there is no need for a four temperatures sensor 92 all four sensors. There is no hysteresis mechanism as found on most
|
A D | emc1403.rst | 56 contain up to four temperature sensors. EMC14x2 support two sensors 58 two external), and EMC14x4 support four sensors (one internal, three
|
/linux/net/rxrpc/ |
A D | sysctl.c | 14 static const unsigned int four = 4; variable 91 .extra1 = (void *)&four, 119 .extra2 = (void *)&four,
|
/linux/tools/testing/selftests/bpf/progs/ |
A D | test_sockmap_kern.h | 237 int *bytes, zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5; in bpf_prog4() local 254 start_pop = bpf_map_lookup_elem(&sock_bytes, &four); in bpf_prog4() 264 int zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5, key = 0; in bpf_prog6() local 285 start_pop = bpf_map_lookup_elem(&sock_bytes, &four); in bpf_prog6() 341 int zero = 0, one = 1, two = 2, three = 3, four = 4, five = 5; in bpf_prog10() local 357 start_pop = bpf_map_lookup_elem(&sock_bytes, &four); in bpf_prog10()
|
/linux/Documentation/networking/ |
A D | ila.rst | 35 independent of its location. ILA identifiers are sixty-four 41 locators are sixty-four bit prefixes. 50 four bits) and an identifier (lower sixty-four bits). 56 An IPv6 address composed of a locator (upper sixty-four 57 bits) and an identifier (low order sixty-four bits). ILA 185 unstructured sixty-four bit value:: 196 still sixty-four bits:: 249 ILA router) or an ILA address (egress ILA router). LOC is the sixty-four 250 bit locator (with format W:X:Y:Z) that overwrites the upper sixty-four 263 sixty-four bits of the destination address. MODE and TYPE have the
|
/linux/Documentation/devicetree/bindings/timer/ |
A D | samsung,exynos4210-mct.yaml | 16 four preset counter values. The CPU local timers are 32-bit free running 41 interrupts should be specified after the four global timer interrupts 72 // in addition to four global timer interrupts. 111 // In this example, the IP contains four local timers, but using 131 // In this example, the IP contains four local timers, but using
|
/linux/Documentation/devicetree/bindings/media/ |
A D | imx.txt | 32 gasket demultiplexes the four virtual channel streams from the host 33 controller's 32-bit output image bus onto four 16-bit parallel busses 48 bus sink endpoint nodes and correspond to the four
|
/linux/Documentation/sound/cards/ |
A D | img-spdif-in.rst | 24 This control is used to attempt acquisition of up to four different sample 31 four sample rates set here. 33 If less than four rates are required, the same rate can be specified more than
|
/linux/tools/bpf/ |
A D | Makefile | 37 FEATURE_TESTS = libbfd disassembler-four-args 38 FEATURE_DISPLAY = libbfd disassembler-four-args 56 ifeq ($(feature-disassembler-four-args), 1)
|
/linux/Documentation/userspace-api/media/v4l/ |
A D | pixfmt-srggb14p.rst | 23 These four pixel formats are packed raw sRGB / Bayer formats with 14 24 bits per colour. Every four consecutive samples are packed into seven 25 bytes. Each of the first four bytes contain the eight high order bits
|
A D | pixfmt-srggb10p.rst | 22 These four pixel formats are packed raw sRGB / Bayer formats with 10 23 bits per sample. Every four consecutive samples are packed into 5
|
A D | pixfmt-srggb12p.rst | 20 These four pixel formats are packed raw sRGB / Bayer formats with 12 23 the pixels, and the third byte contains the four least significants
|
/linux/Documentation/ABI/testing/ |
A D | sysfs-class-chromeos-driver-cros-ec-lightbar | 37 The values written to this file are sets of four integers, 39 to select a single segment, or 4 to set all four segments 43 more than one set of four integers.
|
/linux/Documentation/devicetree/bindings/sound/ |
A D | nvidia,tegra210-amx.yaml | 10 The Audio Multiplexer (AMX) block can multiplex up to four input streams 44 AMX has four inputs and one output. Accordingly ACIF (Audio Client
|
A D | nvidia,tegra210-adx.yaml | 11 16 channels and demultiplexes it into four output streams of up to 16 46 ADX has one input and four outputs. Accordingly ACIF (Audio Client
|
/linux/Documentation/i2c/busses/ |
A D | i2c-mlxcpld.rst | 52 For write transaction address is specified in four first bytes 55 specified in the four first bytes (DATA0 - DATA3). Data is read
|
/linux/Documentation/input/devices/ |
A D | walkera0701.rst | 107 Values for first four channels (analog joystick values) can be found in 112 Next nibbles 12 .. 21 represents four channels (not all channels can be 114 four channels. In nibbles 22 and 23 is a special magic number. Nibble 24 is
|
/linux/Documentation/devicetree/bindings/leds/ |
A D | leds-lm36274.txt | 3 The LM36274 is an integrated four-channel WLED driver and LCD bias supply. 4 The backlight boost provides the power to bias four parallel LED strings with
|
/linux/Documentation/devicetree/bindings/display/imx/ |
A D | ldb.txt | 14 multiplexer in the front to select any of the four IPU display 58 On i.MX6, there should be four input ports (port@[0-3]) that correspond 59 to the four LVDS multiplexer inputs.
|
A D | fsl,imx6-hdmi.yaml | 51 This device has four video ports, corresponding to the four inputs of the
|
/linux/Documentation/devicetree/bindings/media/i2c/ |
A D | imx219.yaml | 60 The sensor supports either two-lane, or four-lane operation. 61 If this property is omitted four-lane operation is assumed.
|
/linux/Documentation/admin-guide/ |
A D | vga-softcursor.rst | 37 VGA, the high four bits specify background and the low four the
|