/linux/Documentation/devicetree/bindings/watchdog/ |
A D | men-a021-wdt.txt | 19 gpios = <&gpio3 9 1 /* WD_EN */ 20 &gpio3 10 1 /* WD_FAST */ 21 &gpio3 11 1 /* WD_TRIG */ 22 &gpio3 6 1 /* RST_CAUSE[0] */ 23 &gpio3 7 1 /* RST_CAUSE[1] */ 24 &gpio3 8 1>; /* RST_CAUSE[2] */
|
/linux/arch/arm/boot/dts/ |
A D | ls1021a-moxa-uc-8410a.dts | 45 gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; 51 gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; 75 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; 81 gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; 87 gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; 93 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; 99 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; 105 gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; 111 gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; 117 gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; [all …]
|
A D | am572x-idk-common.dtsi | 62 gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; 68 gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; 75 gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; 105 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; 159 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; 165 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; 172 id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; 173 vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; 177 load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 182 gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
|
A D | imx28-duckbill-2-enocean.dts | 176 gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 182 gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; 188 gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 193 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; 198 gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; 210 gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
|
A D | imx6q-kontron-samx6i.dtsi | 17 cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, 18 <&gpio3 29 GPIO_ACTIVE_LOW>, 19 <&gpio3 25 GPIO_ACTIVE_LOW>;
|
A D | vf610-zii-cfu1.dts | 36 gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; 42 gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; 48 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; 54 gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; 72 tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 171 interrupt-parent = <&gpio3>;
|
A D | imx6qdl-skov-cpu-revc.dtsi | 8 cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; 17 interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>; 19 pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
|
A D | imx53-cx9020.dts | 90 gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; 95 gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; 100 gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; 106 gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; 111 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
|
A D | kirkwood-l-50.dts | 79 gpio3: gpio-expander@21{ label 105 gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; 155 gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; 165 gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; 175 gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; 186 gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
|
A D | imx28-duckbill-2-485.dts | 164 gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 170 gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; 176 gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 181 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
|
A D | am335x-myirtech-myc.dtsi | 52 gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; 139 scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 140 sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 213 AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7) /* gpio3[5] */ 214 AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7) /* gpio3[6] */ 227 AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpio3[18] */
|
A D | r8a7792-blanche.dts | 123 gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; 130 gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; 137 gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; 144 gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; 151 gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
A D | omap2420-n8x0-common.dtsi | 17 gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */ 18 &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */ 19 &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
|
A D | am5729-beagleboneai.dts | 79 gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; 109 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; 123 gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; 130 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; 137 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; 193 reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>, /* BT-REG-ON */ 194 <&gpio3 18 GPIO_ACTIVE_LOW>; /* WL-REG-ON */ 200 id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; 589 interrupt-parent = <&gpio3>;
|
/linux/drivers/media/pci/cx88/ |
A D | cx88-cards.c | 935 .gpio3 = 0x0000, 942 .gpio3 = 0x0000, 949 .gpio3 = 0x0000, 1721 .gpio3 = 0x0000, 1727 .gpio3 = 0x0000, 1733 .gpio3 = 0x0000, 2286 .gpio3 = 0x0000, 2293 .gpio3 = 0x0000, 2300 .gpio3 = 0x0000, 2307 .gpio3 = 0x0000, [all …]
|
/linux/Documentation/devicetree/bindings/sound/ |
A D | maxim,max9759.txt | 14 shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; 15 mute-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 16 gain-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>, 17 <&gpio3 25 GPIO_ACTIVE_LOW>;
|
A D | soc-ac97link.txt | 25 ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>;
|
/linux/Documentation/devicetree/bindings/hsi/ |
A D | nokia-modem.txt | 46 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ 48 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ 49 <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ 50 <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ 51 <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
|
/linux/drivers/pcmcia/ |
A D | ti113x.h | 370 u8 gpio3, gpio3_old; in ti12xx_irqroute_func0() local 446 gpio3 &= ~TI1250_GPIO_MODE_MASK; in ti12xx_irqroute_func0() 447 if (gpio3 != gpio3_old) in ti12xx_irqroute_func0() 448 config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3); in ti12xx_irqroute_func0() 452 gpio3 = gpio3_old = 0; in ti12xx_irqroute_func0() 468 if (gpio3 != gpio3_old) in ti12xx_irqroute_func0() 748 u8 gpio3; in ti12xx_power_hook() local 799 gpio3 = config_readb(socket, TI1250_GPIO3_CONTROL); in ti12xx_power_hook() 801 gpio3 = (gpio3 & ~TI1250_GPIO_MODE_MASK) | 0x40; in ti12xx_power_hook() 803 gpio3 &= ~TI1250_GPIO_MODE_MASK; in ti12xx_power_hook() [all …]
|
/linux/Documentation/devicetree/bindings/arm/ |
A D | ste-nomadik.txt | 31 gpios = <&gpio3 19 0x1>; 33 interrupt-parent = <&gpio3>; 36 gpios = <&gpio3 16 0x1>;
|
/linux/drivers/input/touchscreen/ |
A D | ad7877.c | 182 bool gpio3; /* P: mutex */ member 195 static bool gpio3; variable 196 module_param(gpio3, bool, 0); 197 MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3"); 527 return sprintf(buf, "%u\n", ts->gpio3); in ad7877_gpio3_show() 543 ts->gpio3 = !!val; in ad7877_gpio3_store() 545 (ts->gpio4 << 4) | (ts->gpio3 << 5)); in ad7877_gpio3_store() 576 (ts->gpio4 << 4) | (ts->gpio3 << 5)); in ad7877_gpio4_store() 605 if (gpio3) in ad7877_attr_is_visible() 608 if (!gpio3) in ad7877_attr_is_visible() [all …]
|
/linux/arch/mips/alchemy/devboards/ |
A D | pm.c | 135 ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) || in db1x_pmattr_show() 170 ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) || in db1x_pmattr_store() 200 ATTR(gpio3) 215 ATTR_LIST(gpio3),
|
/linux/Documentation/devicetree/bindings/display/bridge/ |
A D | toshiba,tc358767.yaml | 103 shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; 104 reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; 140 shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; 141 reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
|
/linux/Documentation/devicetree/bindings/pinctrl/ |
A D | cirrus,lochnagar.yaml | 90 enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, 92 codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6, 94 dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, 95 gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk, 125 enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, 127 codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6, 129 dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, 130 gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
|
/linux/Documentation/devicetree/bindings/net/nfc/ |
A D | marvell,nci.yaml | 126 interrupt-parent = <&gpio3>; 131 reset-n-io = <&gpio3 19 GPIO_ACTIVE_HIGH>; 154 reset-n-io = <&gpio3 19 GPIO_ACTIVE_HIGH>; 165 reset-n-io = <&gpio3 16 GPIO_ACTIVE_HIGH>;
|