/linux/drivers/tty/serial/ |
A D | mpc52xx_uart.c | 170 port->read_status_mask |= MPC52xx_PSC_IMR_IPC; in mpc52xx_psc_enable_ms() 222 & port->read_status_mask in mpc52xx_psc_rx_rdy() 229 & port->read_status_mask in mpc52xx_psc_tx_rdy() 242 port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; in mpc52xx_psc_start_tx() 248 port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; in mpc52xx_psc_stop_tx() 518 port->read_status_mask = in mpc512x_psc_cw_disable_ints() 528 (port->read_status_mask >> 16) & 0x7f); in mpc512x_psc_cw_restore_ints() 859 port->read_status_mask = in mpc5125_psc_cw_disable_ints() 869 (port->read_status_mask >> 16) & 0x7f); in mpc5125_psc_cw_restore_ints() 946 port->read_status_mask |= MPC52xx_PSC_IMR_IPC; in mpc5125_psc_enable_ms() [all …]
|
A D | sa1100.c | 137 sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS); in sa1100_stop_tx() 150 sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS); in sa1100_start_tx() 206 status &= sport->port.read_status_mask; in sa1100_rx_chars() 277 status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS; in sa1100_int() 301 status &= SM_TO_UTSR0(sport->port.read_status_mask) | in sa1100_int() 451 sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS); in sa1100_set_termios() 452 sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR); in sa1100_set_termios() 454 sport->port.read_status_mask |= in sa1100_set_termios() 457 sport->port.read_status_mask |= in sa1100_set_termios()
|
A D | bcm63xx_uart.c | 279 cstat &= port->read_status_mask; in bcm_uart_do_rx() 561 port->read_status_mask = UART_FIFO_VALID_MASK; in bcm_uart_set_termios() 563 port->read_status_mask |= UART_FIFO_FRAMEERR_MASK; in bcm_uart_set_termios() 564 port->read_status_mask |= UART_FIFO_PARERR_MASK; in bcm_uart_set_termios() 567 port->read_status_mask |= UART_FIFO_BRKDET_MASK; in bcm_uart_set_termios()
|
A D | 21285.c | 137 rxs &= port->read_status_mask; in serial21285_rx_chars() 306 port->read_status_mask = RXSTAT_OVERRUN; in serial21285_set_termios() 308 port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; in serial21285_set_termios()
|
A D | xilinx_uartps.c | 246 port->read_status_mask |= CDNS_UART_IXR_BRK; in cdns_uart_handle_rx() 258 isrstatus &= port->read_status_mask; in cdns_uart_handle_rx() 260 status_mask = port->read_status_mask; in cdns_uart_handle_rx() 264 (port->read_status_mask & CDNS_UART_IXR_BRK)) { in cdns_uart_handle_rx() 265 port->read_status_mask &= ~CDNS_UART_IXR_BRK; in cdns_uart_handle_rx() 742 port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG | in cdns_uart_set_termios() 747 port->read_status_mask |= CDNS_UART_IXR_PARITY | in cdns_uart_set_termios()
|
A D | pxa.c | 86 up->port.read_status_mask &= ~UART_LSR_DR; in serial_pxa_stop_rx() 136 *status &= up->port.read_status_mask; in receive_chars() 486 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; in serial_pxa_set_termios() 488 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; in serial_pxa_set_termios() 490 up->port.read_status_mask |= UART_LSR_BI; in serial_pxa_set_termios()
|
A D | vr41xx_siu.c | 261 port->read_status_mask &= ~UART_LSR_DR; in siu_stop_rx() 331 lsr &= port->read_status_mask; in receive_chars() 542 port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR; in siu_set_termios() 544 port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; in siu_set_termios() 546 port->read_status_mask |= UART_LSR_BI; in siu_set_termios()
|
A D | dz.c | 224 status &= uport->read_status_mask; in dz_receive_chars() 617 dport->port.read_status_mask = DZ_OERR; in dz_set_termios() 619 dport->port.read_status_mask |= DZ_FERR | DZ_PERR; in dz_set_termios() 621 dport->port.read_status_mask |= DZ_BREAK; in dz_set_termios()
|
A D | sunsab.c | 201 stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); in receive_chars() 202 stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); in receive_chars() 729 up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | in sunsab_convert_to_sab() 732 up->port.read_status_mask |= (SAB82532_ISR1_CSC | in sunsab_convert_to_sab() 736 up->port.read_status_mask |= (SAB82532_ISR0_PERR | in sunsab_convert_to_sab() 739 up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); in sunsab_convert_to_sab()
|
A D | apbuart.c | 102 rsr &= port->read_status_mask; in apbuart_rx_chars() 262 port->read_status_mask = UART_STATUS_OE; in apbuart_set_termios() 264 port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE; in apbuart_set_termios()
|
A D | clps711x.c | 120 status &= port->read_status_mask; in uart_clps711x_int_rx() 297 port->read_status_mask = UARTDR_OVERR; in uart_clps711x_set_termios() 299 port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR; in uart_clps711x_set_termios()
|
A D | digicolor-usart.c | 159 status &= port->read_status_mask; in digicolor_uart_rx() 325 port->read_status_mask = UA_STATUS_OVERRUN_ERR; in digicolor_uart_set_termios() 327 port->read_status_mask |= UA_STATUS_PARITY_ERR in digicolor_uart_set_termios()
|
A D | max310x.c | 659 if (port->read_status_mask == MAX310X_LSR_RXOVR_BIT) { in max310x_handle_rx() 676 sts &= port->read_status_mask; in max310x_handle_rx() 724 sts &= port->read_status_mask; in max310x_handle_rx() 938 port->read_status_mask = MAX310X_LSR_RXOVR_BIT; in max310x_set_termios() 940 port->read_status_mask |= MAX310X_LSR_RXPAR_BIT | in max310x_set_termios() 943 port->read_status_mask |= MAX310X_LSR_RXBRK_BIT; in max310x_set_termios()
|
A D | st-asc.c | 336 c &= port->read_status_mask; in asc_receive_chars() 598 ascport->port.read_status_mask = ASC_RXBUF_DUMMY_OE; in asc_set_termios() 600 ascport->port.read_status_mask |= ASC_RXBUF_FE | ASC_RXBUF_PE; in asc_set_termios() 602 ascport->port.read_status_mask |= ASC_RXBUF_DUMMY_BE; in asc_set_termios()
|
A D | amba-pl010.c | 144 rsr &= uap->port.read_status_mask; in pl010_rx_chars() 421 uap->port.read_status_mask = UART01x_RSR_OE; in pl010_set_termios() 423 uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; in pl010_set_termios() 425 uap->port.read_status_mask |= UART01x_RSR_BE; in pl010_set_termios()
|
A D | serial_txx9.c | 236 up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; in serial_txx9_stop_rx() 315 disr &= up->port.read_status_mask; in receive_chars() 682 up->port.read_status_mask = TXX9_SIDISR_UOER | in serial_txx9_set_termios() 685 up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; in serial_txx9_set_termios() 687 up->port.read_status_mask |= TXX9_SIDISR_UBRK; in serial_txx9_set_termios()
|
A D | sb1250-duart.c | 363 status &= uport->read_status_mask; in sbd_receive_chars() 586 uport->read_status_mask = M_DUART_OVRUN_ERR; in sbd_set_termios() 588 uport->read_status_mask |= M_DUART_FRM_ERR | in sbd_set_termios() 591 uport->read_status_mask |= M_DUART_RCVD_BRK; in sbd_set_termios()
|
A D | milbeaut_usio.c | 178 status &= port->read_status_mask; in mlb_usio_rx_chars() 343 port->read_status_mask = MLB_USIO_SSR_ORE | MLB_USIO_SSR_RDRF | in mlb_usio_set_termios() 346 port->read_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE; in mlb_usio_set_termios()
|
A D | vt8500_serial.c | 172 c &= ~port->read_status_mask; in handle_rx() 410 port->read_status_mask = 0; in vt8500_set_termios() 412 port->read_status_mask = FER | PER; in vt8500_set_termios()
|
A D | ucc_uart.c | 544 status &= port->read_status_mask; in qe_uart_int_rx() 918 port->read_status_mask = BD_SC_EMPTY | BD_SC_OV; in qe_uart_set_termios() 920 port->read_status_mask |= BD_SC_FR | BD_SC_PR; in qe_uart_set_termios() 922 port->read_status_mask |= BD_SC_BR; in qe_uart_set_termios() 943 port->read_status_mask &= ~BD_SC_EMPTY; in qe_uart_set_termios()
|
A D | owl-uart.c | 235 stat &= port->read_status_mask; in owl_uart_receive_chars() 392 port->read_status_mask |= OWL_UART_STAT_RXER; in owl_uart_set_termios() 394 port->read_status_mask |= OWL_UART_STAT_RXST; in owl_uart_set_termios()
|
/linux/drivers/mmc/core/ |
A D | sdio_uart.c | 76 unsigned int read_status_mask; member 300 port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; in sdio_uart_change_speed() 302 port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; in sdio_uart_change_speed() 304 port->read_status_mask |= UART_LSR_BI; in sdio_uart_change_speed() 366 port->read_status_mask &= ~UART_LSR_DR; in sdio_uart_stop_rx() 399 *status &= port->read_status_mask; in sdio_uart_receive_chars()
|
/linux/drivers/tty/ |
A D | amiserial.c | 77 int read_status_mask; member 234 status &= info->read_status_mask; in receive_chars() 656 info->read_status_mask = UART_LSR_OE | UART_LSR_DR; in change_speed() 658 info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; in change_speed() 660 info->read_status_mask |= UART_LSR_BI; in change_speed() 1244 state->read_status_mask &= ~UART_LSR_DR; in rs_close()
|
A D | mxser.c | 259 u8 read_status_mask; member 649 info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; in mxser_change_speed() 651 info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; in mxser_change_speed() 653 info->read_status_mask |= UART_LSR_BI; in mxser_change_speed() 659 info->read_status_mask |= UART_LSR_BI; in mxser_change_speed() 669 info->read_status_mask |= in mxser_change_speed() 1578 status &= port->read_status_mask; in mxser_receive_chars_old() 1705 status &= port->read_status_mask; in mxser_port_isr()
|
/linux/drivers/tty/serial/cpm_uart/ |
A D | cpm_uart_core.c | 326 status &= port->read_status_mask; in cpm_uart_int_rx() 554 port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); in cpm_uart_set_termios() 556 port->read_status_mask |= BD_SC_FR | BD_SC_PR; in cpm_uart_set_termios() 558 port->read_status_mask |= BD_SC_BR; in cpm_uart_set_termios() 579 port->read_status_mask &= ~BD_SC_EMPTY; in cpm_uart_set_termios()
|