/linux/drivers/hwmon/ |
A D | k8temp.c | 135 u8 scfg; in k8temp_probe() local 171 pci_read_config_byte(pdev, REG_TEMP, &scfg); in k8temp_probe() 173 pci_write_config_byte(pdev, REG_TEMP, scfg); in k8temp_probe() 174 pci_read_config_byte(pdev, REG_TEMP, &scfg); in k8temp_probe() 176 if (scfg & (SEL_PLACE | SEL_CORE)) { in k8temp_probe() 181 scfg |= (SEL_PLACE | SEL_CORE); in k8temp_probe() 182 pci_write_config_byte(pdev, REG_TEMP, scfg); in k8temp_probe() 188 scfg &= ~SEL_CORE; /* Select sensor 1, core0 */ in k8temp_probe() 189 pci_write_config_byte(pdev, REG_TEMP, scfg); in k8temp_probe() 197 scfg &= ~SEL_PLACE; /* Select sensor 0, core1 */ in k8temp_probe() [all …]
|
/linux/arch/powerpc/platforms/85xx/ |
A D | t1042rdb_diu.c | 79 void __iomem *scfg; in t1042rdb_set_pixel_clock() local 91 scfg = of_iomap(scfg_np, 0); in t1042rdb_set_pixel_clock() 93 if (!scfg) { in t1042rdb_set_pixel_clock() 113 clrbits32(scfg + CCSR_SCFG_PIXCLKCR, in t1042rdb_set_pixel_clock() 117 setbits32(scfg + CCSR_SCFG_PIXCLKCR, PIXCLKCR_PXCKEN | (pxclk << 16)); in t1042rdb_set_pixel_clock() 119 iounmap(scfg); in t1042rdb_set_pixel_clock()
|
/linux/drivers/pci/controller/dwc/ |
A D | pci-layerscape.c | 49 struct regmap *scfg; member 91 if (!pcie->scfg) in ls1021_pcie_link_up() 94 regmap_read(pcie->scfg, SCFG_PEXMSCPORTSR(pcie->index), &state); in ls1021_pcie_link_up() 150 pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, in ls1021_pcie_host_init() 152 if (IS_ERR(pcie->scfg)) { in ls1021_pcie_host_init() 153 ret = PTR_ERR(pcie->scfg); in ls1021_pcie_host_init() 155 pcie->scfg = NULL; in ls1021_pcie_host_init() 161 pcie->scfg = NULL; in ls1021_pcie_host_init()
|
/linux/Documentation/devicetree/bindings/arm/freescale/ |
A D | fsl,layerscape-scfg.txt | 9 Chip-specific strings are of the form "fsl,<chip>-scfg", 16 scfg: scfg@1570000 { 17 compatible = "fsl,ls1021a-scfg";
|
/linux/Documentation/devicetree/bindings/powerpc/fsl/ |
A D | scfg.txt | 9 - compatible: should be "fsl,<chip>-scfg" 15 scfg: global-utilities@fc000 { 16 compatible = "fsl,t1040-scfg";
|
/linux/Documentation/devicetree/bindings/interrupt-controller/ |
A D | fsl,ls-extirq.txt | 26 scfg: scfg@1570000 { 27 compatible = "fsl,ls1021a-scfg", "syscon";
|
/linux/drivers/net/ethernet/intel/ixgbe/ |
A D | ixgbe_dcb_nl.c | 25 struct ixgbe_dcb_config *scfg = &adapter->temp_dcb_cfg; in ixgbe_copy_dcb_cfg() local 45 src = &scfg->tc_config[i - DCB_PG_ATTR_TC_0]; in ixgbe_copy_dcb_cfg() 95 if (dcfg->bw_percentage[tx][j] != scfg->bw_percentage[tx][j]) { in ixgbe_copy_dcb_cfg() 96 dcfg->bw_percentage[tx][j] = scfg->bw_percentage[tx][j]; in ixgbe_copy_dcb_cfg() 99 if (dcfg->bw_percentage[rx][j] != scfg->bw_percentage[rx][j]) { in ixgbe_copy_dcb_cfg() 100 dcfg->bw_percentage[rx][j] = scfg->bw_percentage[rx][j]; in ixgbe_copy_dcb_cfg() 107 if (dcfg->tc_config[j].dcb_pfc != scfg->tc_config[j].dcb_pfc) { in ixgbe_copy_dcb_cfg() 108 dcfg->tc_config[j].dcb_pfc = scfg->tc_config[j].dcb_pfc; in ixgbe_copy_dcb_cfg() 113 if (dcfg->pfc_mode_enable != scfg->pfc_mode_enable) { in ixgbe_copy_dcb_cfg() 114 dcfg->pfc_mode_enable = scfg->pfc_mode_enable; in ixgbe_copy_dcb_cfg()
|
/linux/sound/soc/qcom/qdsp6/ |
A D | q6afe.c | 544 struct afe_param_id_slot_mapping_cfg *scfg; member 848 kfree(port->scfg); in q6afe_port_free() 1279 port->scfg = kzalloc(sizeof(*port->scfg), GFP_KERNEL); in q6afe_tdm_port_prepare() 1280 if (!port->scfg) in q6afe_tdm_port_prepare() 1284 port->scfg->num_channels = cfg->num_channels; in q6afe_tdm_port_prepare() 1285 port->scfg->bitwidth = cfg->bit_width; in q6afe_tdm_port_prepare() 1286 port->scfg->data_align_type = cfg->data_align_type; in q6afe_tdm_port_prepare() 1287 memcpy(port->scfg->ch_mapping, cfg->ch_mapping, in q6afe_tdm_port_prepare() 1504 if (port->scfg) { in q6afe_port_start() 1505 ret = q6afe_port_set_param_v2(port, port->scfg, in q6afe_port_start() [all …]
|
/linux/drivers/irqchip/ |
A D | irq-mchp-eic.c | 41 u32 scfg[MCHP_EIC_NIRQ]; member 117 eic->scfg[hwirq] = readl_relaxed(eic->base + in mchp_eic_irq_suspend() 134 writel_relaxed(eic->scfg[hwirq], eic->base + in mchp_eic_irq_resume()
|
A D | built-in.a | 39 irq-ls-scfg-msi.o/
|
A D | .irq-ls-scfg-msi.o.cmd | 1 …scfg-msi.o := /usr/bin/ccache /home/test/workspace/code/optee_3.16/build/../toolchains/aarch64/bin… 3 source_drivers/irqchip/irq-ls-scfg-msi.o := drivers/irqchip/irq-ls-scfg-msi.c 5 deps_drivers/irqchip/irq-ls-scfg-msi.o := \ 1119 drivers/irqchip/irq-ls-scfg-msi.o: $(deps_drivers/irqchip/irq-ls-scfg-msi.o) 1121 $(deps_drivers/irqchip/irq-ls-scfg-msi.o):
|
A D | .built-in.a.cmd | 1 …ip/irq-mvebu-sei.o drivers/irqchip/irq-ls-extirq.o drivers/irqchip/irq-ls-scfg-msi.o drivers/irqch…
|
A D | Makefile | 87 obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
|
/linux/Documentation/devicetree/bindings/pci/ |
A D | layerscape-pci.txt | 35 - fsl,pcie-scfg: Must include two entries. 52 fsl,pcie-scfg = <&scfg 0>;
|
/linux/drivers/dma/ |
A D | st_fdma.c | 358 maxburst = fchan->scfg.src_maxburst; in config_reqctrl() 359 width = fchan->scfg.src_addr_width; in config_reqctrl() 360 addr = fchan->scfg.src_addr; in config_reqctrl() 365 maxburst = fchan->scfg.dst_maxburst; in config_reqctrl() 366 width = fchan->scfg.dst_addr_width; in config_reqctrl() 367 addr = fchan->scfg.dst_addr; in config_reqctrl() 682 memcpy(&fchan->scfg, slave_cfg, sizeof(fchan->scfg)); in st_fdma_slave_config()
|
A D | st_fdma.h | 120 struct dma_slave_config scfg; member
|
/linux/Documentation/devicetree/bindings/mailbox/ |
A D | ti,secure-proxy.yaml | 36 - const: scfg 73 reg-names = "target_data", "rt", "scfg";
|
/linux/arch/arm/boot/dts/ |
A D | ls1021a.dtsi | 174 scfg: scfg@1570000 { label 175 compatible = "fsl,ls1021a-scfg", "syscon"; 813 fsl,pcie-scfg = <&scfg 0>; 837 fsl,pcie-scfg = <&scfg 1>;
|
/linux/arch/arm64/boot/dts/freescale/ |
A D | fsl-ls1012a.dtsi | 172 scfg: scfg@1570000 { label 173 compatible = "fsl,ls1012a-scfg", "syscon";
|
A D | fsl-ls1043a.dtsi | 311 scfg: scfg@1570000 { label 312 compatible = "fsl,ls1043a-scfg", "syscon";
|
A D | fsl-ls1046a.dtsi | 317 scfg: scfg@1570000 { label 318 compatible = "fsl,ls1046a-scfg", "syscon";
|
A D | fsl-ls1028a.dtsi | 220 scfg: syscon@1fc0000 { label 221 compatible = "fsl,ls1028a-scfg", "syscon";
|
/linux/arch/powerpc/boot/dts/fsl/ |
A D | t1023si-post.dtsi | 449 scfg: global-utilities@fc000 { label 450 compatible = "fsl,t1023-scfg";
|
A D | t1040si-post.dtsi | 537 scfg: global-utilities@fc000 { label 538 compatible = "fsl,t1040-scfg";
|
/linux/drivers/net/ethernet/intel/i40e/ |
A D | i40e_common.c | 2313 struct i40e_aqc_switch_seid *scfg = in i40e_aq_get_switch_config() local 2322 scfg->seid = cpu_to_le16(*start_seid); in i40e_aq_get_switch_config() 2325 *start_seid = le16_to_cpu(scfg->seid); in i40e_aq_get_switch_config() 2347 struct i40e_aqc_set_switch_config *scfg = in i40e_aq_set_switch_config() local 2353 scfg->flags = cpu_to_le16(flags); in i40e_aq_set_switch_config() 2354 scfg->valid_flags = cpu_to_le16(valid_flags); in i40e_aq_set_switch_config() 2355 scfg->mode = mode; in i40e_aq_set_switch_config() 2357 scfg->switch_tag = cpu_to_le16(hw->switch_tag); in i40e_aq_set_switch_config() 2358 scfg->first_tag = cpu_to_le16(hw->first_tag); in i40e_aq_set_switch_config() 2359 scfg->second_tag = cpu_to_le16(hw->second_tag); in i40e_aq_set_switch_config()
|