1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Keyboard backlight LED driver for the Wilco Embedded Controller
4 *
5 * Copyright 2019 Google LLC
6 *
7 * Since the EC will never change the backlight level of its own accord,
8 * we don't need to implement a brightness_get() method.
9 */
10
11 #include <linux/device.h>
12 #include <linux/kernel.h>
13 #include <linux/leds.h>
14 #include <linux/platform_data/wilco-ec.h>
15 #include <linux/slab.h>
16
17 #define WILCO_EC_COMMAND_KBBL 0x75
18 #define WILCO_KBBL_MODE_FLAG_PWM BIT(1) /* Set brightness by percent. */
19 #define WILCO_KBBL_DEFAULT_BRIGHTNESS 0
20
21 struct wilco_keyboard_leds {
22 struct wilco_ec_device *ec;
23 struct led_classdev keyboard;
24 };
25
26 enum wilco_kbbl_subcommand {
27 WILCO_KBBL_SUBCMD_GET_FEATURES = 0x00,
28 WILCO_KBBL_SUBCMD_GET_STATE = 0x01,
29 WILCO_KBBL_SUBCMD_SET_STATE = 0x02,
30 };
31
32 /**
33 * struct wilco_keyboard_leds_msg - Message to/from EC for keyboard LED control.
34 * @command: Always WILCO_EC_COMMAND_KBBL.
35 * @status: Set by EC to 0 on success, 0xFF on failure.
36 * @subcmd: One of enum wilco_kbbl_subcommand.
37 * @reserved3: Should be 0.
38 * @mode: Bit flags for used mode, we want to use WILCO_KBBL_MODE_FLAG_PWM.
39 * @reserved5to8: Should be 0.
40 * @percent: Brightness in 0-100. Only meaningful in PWM mode.
41 * @reserved10to15: Should be 0.
42 */
43 struct wilco_keyboard_leds_msg {
44 u8 command;
45 u8 status;
46 u8 subcmd;
47 u8 reserved3;
48 u8 mode;
49 u8 reserved5to8[4];
50 u8 percent;
51 u8 reserved10to15[6];
52 } __packed;
53
54 /* Send a request, get a response, and check that the response is good. */
send_kbbl_msg(struct wilco_ec_device * ec,struct wilco_keyboard_leds_msg * request,struct wilco_keyboard_leds_msg * response)55 static int send_kbbl_msg(struct wilco_ec_device *ec,
56 struct wilco_keyboard_leds_msg *request,
57 struct wilco_keyboard_leds_msg *response)
58 {
59 struct wilco_ec_message msg;
60 int ret;
61
62 memset(&msg, 0, sizeof(msg));
63 msg.type = WILCO_EC_MSG_LEGACY;
64 msg.request_data = request;
65 msg.request_size = sizeof(*request);
66 msg.response_data = response;
67 msg.response_size = sizeof(*response);
68
69 ret = wilco_ec_mailbox(ec, &msg);
70 if (ret < 0) {
71 dev_err(ec->dev,
72 "Failed sending keyboard LEDs command: %d\n", ret);
73 return ret;
74 }
75
76 return 0;
77 }
78
set_kbbl(struct wilco_ec_device * ec,enum led_brightness brightness)79 static int set_kbbl(struct wilco_ec_device *ec, enum led_brightness brightness)
80 {
81 struct wilco_keyboard_leds_msg request;
82 struct wilco_keyboard_leds_msg response;
83 int ret;
84
85 memset(&request, 0, sizeof(request));
86 request.command = WILCO_EC_COMMAND_KBBL;
87 request.subcmd = WILCO_KBBL_SUBCMD_SET_STATE;
88 request.mode = WILCO_KBBL_MODE_FLAG_PWM;
89 request.percent = brightness;
90
91 ret = send_kbbl_msg(ec, &request, &response);
92 if (ret < 0)
93 return ret;
94
95 if (response.status) {
96 dev_err(ec->dev,
97 "EC reported failure sending keyboard LEDs command: %d\n",
98 response.status);
99 return -EIO;
100 }
101
102 return 0;
103 }
104
kbbl_exist(struct wilco_ec_device * ec,bool * exists)105 static int kbbl_exist(struct wilco_ec_device *ec, bool *exists)
106 {
107 struct wilco_keyboard_leds_msg request;
108 struct wilco_keyboard_leds_msg response;
109 int ret;
110
111 memset(&request, 0, sizeof(request));
112 request.command = WILCO_EC_COMMAND_KBBL;
113 request.subcmd = WILCO_KBBL_SUBCMD_GET_FEATURES;
114
115 ret = send_kbbl_msg(ec, &request, &response);
116 if (ret < 0)
117 return ret;
118
119 *exists = response.status != 0xFF;
120
121 return 0;
122 }
123
124 /**
125 * kbbl_init() - Initialize the state of the keyboard backlight.
126 * @ec: EC device to talk to.
127 *
128 * Gets the current brightness, ensuring that the BIOS already initialized the
129 * backlight to PWM mode. If not in PWM mode, then the current brightness is
130 * meaningless, so set the brightness to WILCO_KBBL_DEFAULT_BRIGHTNESS.
131 *
132 * Return: Final brightness of the keyboard, or negative error code on failure.
133 */
kbbl_init(struct wilco_ec_device * ec)134 static int kbbl_init(struct wilco_ec_device *ec)
135 {
136 struct wilco_keyboard_leds_msg request;
137 struct wilco_keyboard_leds_msg response;
138 int ret;
139
140 memset(&request, 0, sizeof(request));
141 request.command = WILCO_EC_COMMAND_KBBL;
142 request.subcmd = WILCO_KBBL_SUBCMD_GET_STATE;
143
144 ret = send_kbbl_msg(ec, &request, &response);
145 if (ret < 0)
146 return ret;
147
148 if (response.status) {
149 dev_err(ec->dev,
150 "EC reported failure sending keyboard LEDs command: %d\n",
151 response.status);
152 return -EIO;
153 }
154
155 if (response.mode & WILCO_KBBL_MODE_FLAG_PWM)
156 return response.percent;
157
158 ret = set_kbbl(ec, WILCO_KBBL_DEFAULT_BRIGHTNESS);
159 if (ret < 0)
160 return ret;
161
162 return WILCO_KBBL_DEFAULT_BRIGHTNESS;
163 }
164
wilco_keyboard_leds_set(struct led_classdev * cdev,enum led_brightness brightness)165 static int wilco_keyboard_leds_set(struct led_classdev *cdev,
166 enum led_brightness brightness)
167 {
168 struct wilco_keyboard_leds *wkl =
169 container_of(cdev, struct wilco_keyboard_leds, keyboard);
170 return set_kbbl(wkl->ec, brightness);
171 }
172
wilco_keyboard_leds_init(struct wilco_ec_device * ec)173 int wilco_keyboard_leds_init(struct wilco_ec_device *ec)
174 {
175 struct wilco_keyboard_leds *wkl;
176 bool leds_exist;
177 int ret;
178
179 ret = kbbl_exist(ec, &leds_exist);
180 if (ret < 0) {
181 dev_err(ec->dev,
182 "Failed checking keyboard LEDs support: %d\n", ret);
183 return ret;
184 }
185 if (!leds_exist)
186 return 0;
187
188 wkl = devm_kzalloc(ec->dev, sizeof(*wkl), GFP_KERNEL);
189 if (!wkl)
190 return -ENOMEM;
191
192 wkl->ec = ec;
193 wkl->keyboard.name = "platform::kbd_backlight";
194 wkl->keyboard.max_brightness = 100;
195 wkl->keyboard.flags = LED_CORE_SUSPENDRESUME;
196 wkl->keyboard.brightness_set_blocking = wilco_keyboard_leds_set;
197 ret = kbbl_init(ec);
198 if (ret < 0)
199 return ret;
200 wkl->keyboard.brightness = ret;
201
202 return devm_led_classdev_register(ec->dev, &wkl->keyboard);
203 }
204