| /u-boot/arch/arm/mach-omap2/omap5/ |
| A D | Kconfig | 133 prompt "GPU Voltage Domain"
135 Select the Operating Performance Point(OPP) for the GPU voltage
141 This config option enables Normal OPP for GPU. This is the safest
147 This config option enables Over drive OPP for GPU.
152 This config option enables High OPP for GPU.
|
| /u-boot/arch/arm/dts/ |
| A D | omap5-gpu-thermal.dtsi | 2 * Device Tree Source for OMAP543x SoC GPU thermal
|
| A D | stm32mp157.dtsi | 15 clocks = <&rcc GPU>, <&rcc GPU_K>;
|
| A D | rk3288-veyron-mickey.dts | 115 * and don't let the GPU go faster than 400 MHz. Note that we
116 * won't throttle the GPU lower than 400 MHz due to CPU
117 * heat--we'll let the GPU do the rest itself.
128 * the CPU and the GPU.
|
| A D | bcm2835-rpi-cm1-io1.dts | 13 * This is based on the official GPU firmware DT blob.
|
| A D | bcm2837-rpi-cm3-io3.dts | 13 * This is based on the official GPU firmware DT blob.
|
| A D | bcm2835-rpi-zero.dts | 24 * This is based on the official GPU firmware DT blob.
|
| A D | bcm2836-rpi-2-b.dts | 33 * the official GPU firmware DT blob.
|
| A D | stm32mp157c-odyssey-som-u-boot.dtsi | 100 /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
|
| A D | bcm2835-rpi-zero-w.dts | 34 * This is based on the official GPU firmware DT blob.
|
| A D | bcm2837-rpi-3-b-plus.dts | 58 * the official GPU firmware DT blob.
|
| A D | bcm2837-rpi-3-b.dts | 53 * the official GPU firmware DT blob.
|
| A D | stm32mp15xx-dhcor-u-boot.dtsi | 138 /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
|
| A D | bcm2837-rpi-3-a-plus.dts | 51 * This is mostly based on the official GPU firmware DT blob.
|
| A D | stm32mp157a-dk1-u-boot.dtsi | 137 /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
|
| A D | stm32mp157c-ed1-u-boot.dtsi | 133 /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
|
| /u-boot/arch/arm/mach-rockchip/ |
| A D | Kconfig | 21 including NEON and GPU, Mali-400 graphics, several DDR3 options
35 including NEON and GPU, Mali-400 graphics, several DDR3 options
45 including NEON and GPU, Mali-400 graphics, several DDR3 options
67 including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two
95 including NEON and GPU, Mali-400 graphics, several DDR3 options
127 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
175 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
255 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
|
| /u-boot/arch/arm/mach-sunxi/ |
| A D | dram_sunxi_dw.c | 126 MBUS_CONF( GPU, true, HIGH, 0, 1536, 1024, 256); in mctl_set_master_priority_h3()
151 MBUS_CONF( GPU, true, HIGH, 0, 1792, 1536, 0); in mctl_set_master_priority_v3s()
174 MBUS_CONF( GPU, false, HIGH, 0, 1536, 1400, 256); in mctl_set_master_priority_a64()
204 MBUS_CONF( GPU, true, HIGHEST, 0, 600, 400, 200); in mctl_set_master_priority_h5()
232 MBUS_CONF( GPU, true, HIGHEST, 0, 600, 400, 200); in mctl_set_master_priority_r40()
|
| /u-boot/include/dt-bindings/clock/ |
| A D | stm32mp1-clks.h | 114 #define GPU 101 macro
|
| /u-boot/doc/board/amlogic/ |
| A D | odroid-c2.rst | 10 - ARM Mali 450 GPU
|
| A D | nanopi-k2.rst | 10 - ARM Mali 450 GPU
|
| A D | p200.rst | 10 - ARM Mali 450 GPU
|
| A D | p201.rst | 10 - ARM Mali 450 GPU
|
| /u-boot/arch/arm/mach-mediatek/ |
| A D | Kconfig | 29 including NEON and GPU, Mali-450 graphics, several DDR3 options,
|
| /u-boot/drivers/power/ |
| A D | Kconfig | 113 On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
115 On A80 boards dcdc2 powers the GPU and can be left off.
136 On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
153 On A83T boards dcdc4 is used for VDD-GPU.
|