/u-boot/board/wandboard/ |
A D | wandboard.c | 162 | MUX_PAD_CTRL(I2C_PAD_CTRL), 164 | MUX_PAD_CTRL(I2C_PAD_CTRL), 169 | MUX_PAD_CTRL(I2C_PAD_CTRL), 171 | MUX_PAD_CTRL(I2C_PAD_CTRL), 179 | MUX_PAD_CTRL(I2C_PAD_CTRL), 181 | MUX_PAD_CTRL(I2C_PAD_CTRL), 186 | MUX_PAD_CTRL(I2C_PAD_CTRL), 188 | MUX_PAD_CTRL(I2C_PAD_CTRL), 196 | MUX_PAD_CTRL(I2C_PAD_CTRL), 198 | MUX_PAD_CTRL(I2C_PAD_CTRL), [all …]
|
/u-boot/board/CarMediaLab/flea3/ |
A D | flea3.c | 78 #define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE) macro 83 NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL), in setup_iomux_i2c() 84 NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL), in setup_iomux_i2c() 86 NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL), in setup_iomux_i2c() 87 NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL), in setup_iomux_i2c()
|
/u-boot/board/embest/mx6boards/ |
A D | mx6boards.c | 310 | MUX_PAD_CTRL(I2C_PAD_CTRL), 312 | MUX_PAD_CTRL(I2C_PAD_CTRL), 317 | MUX_PAD_CTRL(I2C_PAD_CTRL), 319 | MUX_PAD_CTRL(I2C_PAD_CTRL), 327 | MUX_PAD_CTRL(I2C_PAD_CTRL), 329 | MUX_PAD_CTRL(I2C_PAD_CTRL), 334 | MUX_PAD_CTRL(I2C_PAD_CTRL), 336 | MUX_PAD_CTRL(I2C_PAD_CTRL), 344 | MUX_PAD_CTRL(I2C_PAD_CTRL), 346 | MUX_PAD_CTRL(I2C_PAD_CTRL), [all …]
|
/u-boot/board/compulab/cl-som-imx7/ |
A D | cl-som-imx7.c | 34 #define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ macro 43 MUX_PAD_CTRL(I2C_PAD_CTRL), 45 MUX_PAD_CTRL(I2C_PAD_CTRL), 50 MUX_PAD_CTRL(I2C_PAD_CTRL), 52 MUX_PAD_CTRL(I2C_PAD_CTRL),
|
/u-boot/board/freescale/mx53evk/ |
A D | mx53evk.c | 49 #define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ macro 55 NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL), in setup_i2c() 56 NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL), in setup_i2c() 60 NEW_PAD_CTRL(MX53_PAD_KEY_ROW3__I2C2_SDA, I2C_PAD_CTRL), in setup_i2c() 61 NEW_PAD_CTRL(MX53_PAD_KEY_COL3__I2C2_SCL, I2C_PAD_CTRL), in setup_i2c()
|
/u-boot/board/tqc/tqma6/ |
A D | tqma6.c | 52 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ macro 179 I2C_PAD_CTRL), 181 I2C_PAD_CTRL), 186 I2C_PAD_CTRL), 188 I2C_PAD_CTRL),
|
A D | tqma6_mba6.c | 53 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ macro
|
/u-boot/board/compulab/cm_fx6/ |
A D | cm_fx6.c | 232 PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL), 233 PAD_EIM_D21__GPIO3_IO21 | MUX_PAD_CTRL(I2C_PAD_CTRL), 235 PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL), 236 PAD_EIM_D28__GPIO3_IO28 | MUX_PAD_CTRL(I2C_PAD_CTRL), 240 PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL), 241 PAD_KEY_COL3__GPIO4_IO12 | MUX_PAD_CTRL(I2C_PAD_CTRL), 243 PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL), 248 PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL), 249 PAD_GPIO_3__GPIO1_IO03 | MUX_PAD_CTRL(I2C_PAD_CTRL), 251 PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL), [all …]
|
/u-boot/board/freescale/imx8mp_evk/ |
A D | spl.c | 50 #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PE) macro 51 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/gateworks/gw_ventana/ |
A D | common.h | 34 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ macro 44 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/barco/platinum/ |
A D | platinum.h | 34 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ macro 50 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/phytec/phycore_imx8mp/ |
A D | spl.c | 36 #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PE) macro 37 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/freescale/mx53loco/ |
A D | mx53loco.c | 63 #define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ macro 69 NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL), in setup_iomux_i2c() 70 NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL), in setup_iomux_i2c()
|
/u-boot/board/warp/ |
A D | warp.c | 43 #define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ macro 103 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/menlo/m53menlo/ |
A D | m53menlo.c | 383 #define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ macro 390 NEW_PAD_CTRL(MX53_PAD_EIM_D28__I2C1_SDA, I2C_PAD_CTRL), in setup_iomux_i2c() 391 NEW_PAD_CTRL(MX53_PAD_EIM_D21__I2C1_SCL, I2C_PAD_CTRL), in setup_iomux_i2c() 393 NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL), in setup_iomux_i2c() 394 NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL), in setup_iomux_i2c()
|
/u-boot/board/liebherr/display5/ |
A D | common.h | 26 #define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ macro
|
/u-boot/board/technexion/pico-imx7d/ |
A D | pico-imx7d.c | 30 #define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ macro 34 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/freescale/imx8mq_evk/ |
A D | spl.c | 45 #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) macro 46 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/barco/titanium/ |
A D | titanium.c | 39 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ macro 65 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/bachmann/ot1200/ |
A D | ot1200.c | 49 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | OUTPUT_40OHM | \ macro 126 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/ccv/xpress/ |
A D | xpress.c | 42 #define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ macro 64 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/BuR/brppt2/ |
A D | board.c | 45 #define I2C_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ macro 120 MUXDESC(PAD_GPIO_3__I2C3_SCL, I2C_PAD_CTRL), 121 MUXDESC(PAD_GPIO_6__I2C3_SDA, I2C_PAD_CTRL),
|
/u-boot/board/inversepath/usbarmory/ |
A D | usbarmory.c | 64 #define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ macro 101 NEW_PAD_CTRL(MX53_PAD_EIM_D28__I2C1_SDA, I2C_PAD_CTRL), in setup_iomux_i2c() 102 NEW_PAD_CTRL(MX53_PAD_EIM_D21__I2C1_SCL, I2C_PAD_CTRL), in setup_iomux_i2c()
|
/u-boot/board/kosagi/novena/ |
A D | novena_spl.c | 60 #define I2C_PAD_CTRL \ macro 71 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
/u-boot/board/boundary/nitrogen6x/ |
A D | nitrogen6x.c | 60 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ macro 145 I2C_PADS_INFO_ENTRY(I2C1, EIM_D21, 3, 21, EIM_D28, 3, 28, I2C_PAD_CTRL), 148 I2C_PAD_CTRL), 150 I2C_PADS_INFO_ENTRY(I2C3, GPIO_5, 1, 05, GPIO_16, 7, 11, I2C_PAD_CTRL),
|