| /u-boot/arch/arm/include/asm/mach-imx/ |
| A D | iomux-v3.h | 147 #define PAD_CTL_PUS_22K_UP (3 << 14 | PAD_CTL_PUE) macro
208 #define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) macro
227 #define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) macro
|
| /u-boot/board/liebherr/display5/ |
| A D | common.h | 19 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_MED | \
|
| /u-boot/arch/arm/include/asm/arch-mx25/ |
| A D | iomux-mx25.h | 434 …25_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x3c4, 0x1cc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP),
455 MX25_PAD_FEC_RX_DV__CAN2_RX = IOMUX_PAD(0x3dc, 0x1e4, 0x04, 0x484, 0, PAD_CTL_PUS_22K_UP),
471 MX25_PAD_GPIO_A__CAN1_TX = IOMUX_PAD(0x3f0, 0x1f4, 0x06, 0, 0, PAD_CTL_PUS_22K_UP),
475 MX25_PAD_GPIO_B__CAN1_RX = IOMUX_PAD(0x3f4, 0x1f8, 0x06, 0x480, 1, PAD_CTL_PUS_22K_UP),
479 MX25_PAD_GPIO_C__CAN2_TX = IOMUX_PAD(0x3f8, 0x1fc, 0x06, 0, 0, PAD_CTL_PUS_22K_UP),
483 MX25_PAD_GPIO_D__CAN2_RX = IOMUX_PAD(0x3fc, 0x200, 0x06, 0x484, 1, PAD_CTL_PUS_22K_UP),
|
| /u-boot/board/toradex/colibri-imx6ull/ |
| A D | colibri-imx6ull.c | 44 #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP)
|
| /u-boot/board/warp/ |
| A D | warp.c | 38 #define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \
|
| /u-boot/arch/arm/mach-imx/mx6/ |
| A D | litesom.c | 29 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/board/technexion/pico-imx6ul/ |
| A D | spl.c | 155 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/board/myir/mys_6ulx/ |
| A D | spl.c | 107 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/board/phytec/pcl063/ |
| A D | spl.c | 108 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| A D | pcl063.c | 60 #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP)
|
| /u-boot/board/grinn/liteboard/ |
| A D | board.c | 40 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/board/variscite/dart_6ul/ |
| A D | spl.c | 114 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/board/technologic/ts4800/ |
| A D | ts4800.c | 79 PAD_CTL_PUS_22K_UP | in setup_iomux_fec()
|
| /u-boot/board/freescale/mx53evk/ |
| A D | mx53evk.c | 122 PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), in setup_iomux_fec()
|
| /u-boot/board/freescale/mx6sxsabresd/ |
| A D | mx6sxsabresd.c | 41 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/arch/arm/include/asm/arch-vf610/ |
| A D | iomux-vf610.h | 30 PAD_CTL_PUS_22K_UP | PAD_CTL_IBE_ENABLE)
33 PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
|
| /u-boot/board/ccv/xpress/ |
| A D | xpress.c | 39 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/board/freescale/mx6ul_14x14_evk/ |
| A D | mx6ul_14x14_evk.c | 129 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/board/freescale/mx6slevk/ |
| A D | mx6slevk.c | 37 #define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \
|
| /u-boot/board/menlo/m53menlo/ |
| A D | m53menlo.c | 96 PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), in setup_iomux_fec()
|
| /u-boot/board/kosagi/novena/ |
| A D | novena_spl.c | 49 PAD_CTL_PUS_22K_UP | PAD_CTL_HYS)
|
| /u-boot/board/udoo/neo/ |
| A D | neo.c | 53 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
| /u-boot/arch/arm/include/asm/arch-mx5/ |
| A D | iomux-mx51.h | 69 …MX51_PAD_EIM_EB2__FEC_MDIO = IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, PAD_CTL_PUS_22K_UP | PAD_CTL_SR…
|