| /u-boot/arch/x86/cpu/quark/ |
| A D | smc.c | 1358 for (bl = 0; bl < NUM_BYTE_LANES; bl++) { in restore_timings()
1386 for (bl = 0; bl < NUM_BYTE_LANES; bl++) { in default_timings()
1458 for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) in rcvn_cal()
1470 for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { in rcvn_cal()
1481 for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { in rcvn_cal()
1506 for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { in rcvn_cal()
1515 for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { in rcvn_cal()
1721 for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { in wr_level()
1736 for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { in wr_level()
2242 for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { in wr_train()
[all …]
|
| A D | mrc_util.c | 1066 for (bl = 0; bl < 2; bl++) { in sample_dqs()
1112 for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { in find_rising_edge()
1137 for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { in find_rising_edge()
1188 set_rcvn(channel, rank, bl, delay[bl]); in find_rising_edge()
1202 for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { in find_rising_edge()
1214 bl, delay[bl]); in find_rising_edge()
1217 bl, delay[bl]); in find_rising_edge()
1231 bl, delay[bl]); in find_rising_edge()
1234 bl, delay[bl]); in find_rising_edge()
1360 for (bl = 0; bl < NUM_BYTE_LANES; bl++) { in clear_pointers()
[all …]
|
| /u-boot/arch/arm/cpu/armv8/fsl-layerscape/ |
| A D | lowlevel.S | 66 bl get_gic_offset
95 bl ccn504_set_aux
103 bl get_svr
111 bl ccn504_set_aux
114 bl ccn504_set_aux
127 bl ccn504_set_qos
130 bl ccn504_set_qos
133 bl ccn504_set_qos
137 bl ccn504_set_qos
140 bl ccn504_set_qos
[all …]
|
| /u-boot/arch/arm/cpu/armv8/ |
| A D | exceptions.S | 40 bl _exception_entry
41 bl do_bad_sync
67 bl _exception_entry
68 bl do_bad_irq
93 bl _exception_entry
94 bl do_bad_fiq
113 bl do_bad_error
141 bl do_sync
147 bl do_irq
153 bl do_fiq
[all …]
|
| A D | start.S | 108 bl reset_sctrl
161 bl apply_core_errata
171 bl lowlevel_init
191 bl _main
323 bl gic_init_secure
327 bl gic_init_secure_percpu
331 bl gic_init_secure_percpu
347 bl gic_wait_for_interrupt
355 bl armv8_switch_to_el2
361 bl armv8_switch_to_el1
|
| /u-boot/arch/arm/mach-rmobile/ |
| A D | lowlevel_init_gen3.S | 48 bl gic_init_secure
55 bl gic_init_secure
59 bl gic_init_secure_percpu
63 bl gic_init_secure_percpu
78 bl gic_wait_for_interrupt
86 bl armv8_switch_to_el2
92 bl armv8_switch_to_el1
98 bl s_init
|
| /u-boot/arch/arm/lib/ |
| A D | crt0.S | 75 bl memset
106 bl board_init_f_alloc_reserve
110 bl board_init_f_init_reserve
117 bl board_init_f
145 bl relocate_vectors
149 bl c_runtime_cpu_setup /* we still call old routine here */
159 bl spl_relocate_stack_gd
166 bl coloured_LED_init
167 bl red_led_on
|
| A D | crt0_64.S | 88 bl board_init_f_alloc_reserve
92 bl board_init_f_init_reserve
95 bl board_init_f
127 bl c_runtime_cpu_setup /* still call old routine */
131 bl spl_relocate_stack_gd /* may return NULL */
|
| A D | vectors.S | 253 bl do_undefined_instruction
259 bl do_software_interrupt
265 bl do_prefetch_abort
271 bl do_data_abort
277 bl do_not_used
284 bl do_irq
290 bl do_fiq
|
| A D | relocate_64.S | 81 bl hang
92 bl __asm_flush_dcache_range
93 bl __asm_flush_l3_dcache
|
| /u-boot/arch/arm/mach-socfpga/ |
| A D | lowlevel_init_soc64.S | 28 bl gic_init_secure
32 bl gic_init_secure_percpu
36 bl gic_init_secure_percpu
52 bl gic_wait_for_interrupt
60 bl armv8_switch_to_el2
66 bl armv8_switch_to_el1
|
| /u-boot/board/cortina/presidio-asic/ |
| A D | lowlevel_init.S | 39 bl gic_init_secure
44 bl gic_init_secure_percpu
48 bl gic_init_secure_percpu
64 bl gic_wait_for_interrupt
72 bl armv8_switch_to_el2
78 bl armv8_switch_to_el1
|
| /u-boot/arch/arm/cpu/arm720t/ |
| A D | start.S | 42 bl cpu_init_crit
45 bl _main
75 bl lowlevel_init
|
| /u-boot/arch/arm/cpu/arm946es/ |
| A D | start.S | 49 bl cpu_init_crit
52 bl _main
97 bl lowlevel_init /* go setup memory */
|
| /u-boot/arch/powerpc/cpu/mpc86xx/ |
| A D | cpu.c | 195 unsigned long batu, bl; in setup_ddr_bat() local
197 bl = TO_BATU_BL(min(dram_size, CONFIG_MAX_MEM_MAPPED)); in setup_ddr_bat()
199 if (BATU_SIZE(bl) != dram_size) { in setup_ddr_bat()
200 u64 sz = (u64)dram_size - BATU_SIZE(bl); in setup_ddr_bat()
204 batu = bl | BATU_VS | BATU_VP; in setup_ddr_bat()
|
| /u-boot/arch/arm/cpu/arm1136/ |
| A D | start.S | 43 bl cpu_init_crit
46 bl _main
90 bl lowlevel_init /* go setup pll,mux,memory */
|
| /u-boot/arch/arm/cpu/arm926ejs/ |
| A D | start.S | 50 bl cpu_init_crit
53 bl _main
108 bl lowlevel_init /* go setup pll,mux,memory */
|
| /u-boot/arch/arm/cpu/armv8/bcmns3/ |
| A D | lowlevel.S | 70 bl hnf_set_pstate
73 bl hnf_pstate_poll
79 bl hnf_set_pstate
82 bl hnf_pstate_poll
|
| /u-boot/arch/arm/cpu/arm920t/ |
| A D | start.S | 57 bl cpu_init_crit
60 bl _main
108 bl lowlevel_init
|
| /u-boot/include/ |
| A D | watchdog.h | 40 #define WATCHDOG_RESET bl hw_watchdog_reset
52 #define WATCHDOG_RESET bl watchdog_reset
|
| /u-boot/arch/arm/cpu/sa1100/ |
| A D | start.S | 43 bl cpu_init_crit
46 bl _main
105 bl lowlevel_init
|
| /u-boot/arch/arm/mach-tegra/ |
| A D | psci.S | 52 bl psci_get_cpu_id @ CPU ID => r0
70 bl psci_cpu_off_common
72 bl psci_get_cpu_id @ CPU ID => r0
93 bl psci_save @ store target PC and context id
|
| /u-boot/board/Seagate/goflexhome/ |
| A D | goflexhome.c | 154 u32 bl; in set_leds() local
159 bl = readl(&r->blink_en) & ~BOTH_LEDS; in set_leds()
160 writel(bl | blinking, &r->blink_en); in set_leds()
|
| /u-boot/arch/arm/cpu/armv7/ |
| A D | psci.S | 261 bl psci_v7_flush_dcache_all
271 bl psci_v7_flush_dcache_all
275 bl psci_disable_smp
312 bl psci_get_cpu_id @ CPU ID => r0
330 bl psci_enable_smp
332 bl _nonsec_init
334 bl psci_stack_setup
336 bl psci_arch_cpu_entry
338 bl psci_get_cpu_id @ CPU ID => r0
340 bl psci_get_context_id @ context id => r0
[all …]
|
| /u-boot/arch/powerpc/lib/ |
| A D | ticks.S | 39 bl get_ticks /* Get start time */
46 1: bl get_ticks /* Get current time */
|