| /u-boot/board/amlogic/odroid-n2/ |
| A D | odroid-n2.c | 41 } boards[] = { variable
91 for (i = 0 ; i < ARRAY_SIZE(boards) ; ++i) { in odroid_detect_variant()
92 if (soc_id == boards[i].soc_id && in odroid_detect_variant()
93 adcval >= boards[i].adc_min && in odroid_detect_variant()
94 adcval < boards[i].adc_max) { in odroid_detect_variant()
95 variant = boards[i].variant; in odroid_detect_variant()
|
| /u-boot/drivers/power/ |
| A D | Kconfig | 23 Select this for boards which do not use a PMIC.
32 A10s boards.
41 A10, A13 and A20 boards.
50 A23 and A31 boards.
59 H616 boards.
83 H3 boards.
117 On R40 boards dcdc2 is VDD-CPU and should be 1.1V
153 On A83T boards dcdc4 is used for VDD-GPU.
154 On H616 boards dcdcd is used for VCC-DRAM.
207 On A10(s) / A13 / A20 boards aldo3 should be 2.8V.
[all …]
|
| /u-boot/doc/ |
| A D | README.AMCC-eval-boards-cleanup | 2 Cleanup of AMCC eval boards (Walnut/Sycamore, Bubinga, Ebony, Ocotea)
5 Changes to all AMCC eval boards:
9 boards.
21 Sycamore/Walnut (one port supporting both eval boards):
24 o Cleanup to allow easier "cloning" for different (custom) boards:
|
| A D | README.kconfig | 47 You can simply remove the prefixes. Do not add them for new boards.
76 - include/configs/<board>.h (exists for all boards)
88 Conversion from boards.cfg to Kconfig
92 SoC, etc. of all the supported boards. It was deleted when switching to
93 Kconfig. Each field of boards.cfg was converted as follows:
106 Tips to add/remove boards
134 by any other boards
143 - The option field of boards.cfg, which was used for the pre-Kconfig
147 CONFIG_SYS_EXTRA_OPTIONS should not be used for new boards.
149 - In the pre-Kconfig, a single board had multiple entries in the boards.cfg
[all …]
|
| A D | README.s5p4418 | 7 (and other) boards [1].
9 Currently the following boards are supported:
|
| /u-boot/tools/buildman/ |
| A D | func_test.py | 37 boards = [ variable
190 for brd in boards:
196 self._total_builds = self._commits * len(boards)
222 def _RunControl(self, *args, clean_dir=False, boards=None): argument
226 make_func=self._HandleMake, boards=boards or self._boards,
453 (self._commits, len(boards)), lines[0].text)
479 self.assertEqual(self._builder.count, 2 * len(boards))
561 board_list.AddBoard(board.Board(*boards[0]))
563 boards=board_list)
580 board_list.AddBoard(board.Board(*boards[0]))
[all …]
|
| A D | control.py | 88 def ShowToolchainPrefix(boards, toolchains): argument
101 boards = boards.GetSelectedDict()
103 for brd in boards.values():
184 if not boards:
199 boards = board.Boards()
200 boards.ReadBoards(board_file)
207 if options.boards:
209 for b in options.boards:
215 selected = boards.GetSelected()
220 err = ShowToolchainPrefix(boards, toolchains)
[all …]
|
| A D | test.py | 96 boards = [ variable
133 self.boards = board.Boards()
134 for brd in boards:
135 self.boards.AddBoard(board.Board(*brd))
136 self.boards.SelectBoards([])
186 for board in boards:
205 board_selected = self.boards.GetSelectedDict()
219 self.assertEqual(count, len(commits) * len(boards) + 3)
255 if boards:
475 self.assertEqual(self.boards.SelectBoards(['arm']),
[all …]
|
| A D | board.py | 241 def SelectBoards(self, args, exclude=[], boards=None): argument
286 elif boards:
287 if board.target in boards:
305 if boards:
306 remaining = set(boards) - set(found)
|
| A D | README | 127 Selecting which boards to build
139 * 'powerpc' All PowerPC boards
154 For building specific boards you can use the --boards (or --bo) option, which
158 buildman --boards sandbox,snow --boards
702 x86: (for 1/3 boards) data +16.0
704 x86: (for 1/3 boards) text +76.0
706 x86: (for 1/3 boards) bss -2140.0
918 at91-boards=ENABLE_AT91_TEST=1
1060 boards.cfg is up to date. Nothing to do.
1203 - build all Power Architecture boards:
[all …]
|
| /u-boot/doc/board/xilinx/ |
| A D | zynq.rst | 11 like supported boards, ML status and TODO list.
13 Zynq boards
87 - Added zynq boards named - zc70x, zed, microzed, zc770_xm010/xm011/xm012/xm013
99 - Added basic FDT support for zynq boards
102 * [1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm
103 * [2] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm
|
| A D | zynqmp.rst | 13 ZynqMP boards
16 * zcu100 (ultra96 v1), zcu102, zcu104, zcu106 - Evaluation boards
17 * zc1232 - Characterization boards
18 * zcu111, zcu208, zcu216 - RFSOC evaluation boards
19 * zcu1254, zcu1275, zcu1285 - RFSOC characterization boards
20 * a2197 - System Controller on Versal boards
22 * zc1751 - Characterization Processor boards
|
| /u-boot/board/congatec/cgtqmx6eval/ |
| A D | README | 1 U-Boot for the Congatec QMX6 boards
4 QMX6 boards.
9 - Build U-Boot for Congatec QMX6 boards:
59 The boot medium of Congatec QMX6 boards is the SPI NOR flash, so boot
|
| /u-boot/doc/board/rockchip/ |
| A D | rockchip.rst | 10 This document describes the information about Rockchip supported boards
13 Rockchip boards
22 List of mainline supported rockchip boards:
58 - 96boards RK3399 Ficus (ficus-rk3399)
59 - 96boards Rock960 (rock960-rk3399)
100 To build rk3328 boards::
106 To build rk3288 boards::
111 To build rk3368 boards::
117 To build rk3399 boards::
232 - Add missing SoC's with it boards list
|
| /u-boot/board/udoo/ |
| A D | README | 1 How to use U-Boot on MX6Q/DL Udoo boards
4 - Build U-Boot for MX6Q/DL Udoo boards:
|
| /u-boot/board/freescale/p1_p2_rdb_pc/ |
| A D | README | 3 P1_P2_RDB_PC represents a set of boards including
14 Key features on these boards include:
23 As these boards use soldered DDR chips not regular DIMMs, an on-board EEPROM
27 this approach. ODT option is forced to fit this set of boards, again because
38 Some boards have QE module in the silicon (P1021 and P1025). QE and eLBC have
|
| /u-boot/arch/mips/mach-bmips/ |
| A D | Kconfig | 145 Comtrend AR-5315u boards have a BCM6318 SoC with 64 MB of RAM and 16
156 Comtrend AR-5387un boards have a BCM6328 SoC with 64 MB of RAM and 16
167 Comtrend CT-5361 boards have a BCM6348 SoC with 16 MB of RAM and 4 MB
178 Comtrend VR-3032u boards have a BCM63268 SoC with 64 MB of RAM and
189 Comtrend WAP-5813n boards have a BCM6369 SoC with 64 MB of RAM and
200 Huawei EchoLife HG556a boards have a BCM6358 SoC with 64 MB of RAM
211 Netgear CG3100D boards have a BCM3380 SoC with 64 MB of RAM and 8 MB
222 Netgear DGND3700v2 boards have a BCM6362 SoC with 64 MB of RAM and
233 Sagem F@ST1704 boards have a BCM6338 SoC with 16 MB of RAM and 4 MB
244 SFR NeufBox 4 (Sercomm) boards have a BCM6358 SoC with 32 MB of RAM
|
| /u-boot/doc/driver-model/ |
| A D | fdt-fixup.rst | 17 possible daughter boards that can be attached to this mother board. Different
18 daughter boards then either offer the slightly different functionality, or the
25 system, depending on which daughter boards are connected to the motherboard.
31 boards is then detected, and the corresponding device tree overlays are applied
32 to support the components on the daughter boards.
35 provide a way to find out if and which daughter boards are installed for this
39 integrated, and is used on some boards to alter the device tree that is later
64 boards have to implement the function board_fix_fdt, which has the following
122 not, since they are on daughter boards) on a I2C bus are queried for, and
|
| /u-boot/arch/arm/mach-aspeed/ |
| A D | Kconfig | 23 It is used as Board Management Controller on many server boards,
35 It is used as Board Management Controller on many server boards,
|
| /u-boot/board/keymile/kmp204x/ |
| A D | rcw_kmp204x.cfg | 2 # Default RCW for kmp204x boards
|
| /u-boot/drivers/sysinfo/ |
| A D | Kconfig | 23 Support querying device information for the Sandbox boards.
28 Some boards want to specify the manufacturer or product name but do
|
| /u-boot/board/hisilicon/hikey960/ |
| A D | README | 14 https://www.96boards.org/product/hikey960/
27 > git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
28 > git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
29 …> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hike…
30 …> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hike…
31 …> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hike…
32 …> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hike…
33 …> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hike…
34 …> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hike…
107 https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey960/installation/board-re…
|
| /u-boot/arch/sh/lib/ |
| A D | Kconfig | 6 Linux image) on SH-architecture boards.
|
| /u-boot/board/intel/edison/ |
| A D | dsdt.asl | 5 * Partially based on dsdt.asl for other x86 boards
|
| /u-boot/board/boundary/nitrogen6x/ |
| A D | README | 2 Freescale i.MX6Q SabreLite boards
6 Freescale i.MX6Q SabreLite boards.
24 The default bootcmd for these boards is configured
73 board configurations is shown in the boards.cfg file:
|