Searched refs:enter (Results 1 – 25 of 40) sorted by relevance
12
60 smc 0 @ SMC #0 to enter monitor mode73 smc 0 @ SMC #0 to enter monitor mode85 smc 0 @ SMC #0 to enter monitor mode
81 static void mxs_ocotp_scale_vddio(bool enter, uint32_t *val) in mxs_ocotp_scale_vddio() argument85 if (enter) { in mxs_ocotp_scale_vddio()138 static int mxs_ocotp_scale_hclk(bool enter, uint32_t *val) in mxs_ocotp_scale_hclk() argument151 if (enter) { in mxs_ocotp_scale_hclk()
22 CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter pr…
23 CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter pr…
18 enter-triggers-tonorm;
46 smc 0 @ SMC #0 to enter monitor mode58 smc 0 @ SMC #0 to enter monitor mode
46 3. Power-up the SabreLite, press 'space' to enter command mode in the U-Boot48 enter the following commands:79 1. Power-up the SabreLite, press 'space' to enter command mode in the U-Boot80 and enter the following commands:
27 void mscc_switch_reset(bool enter) in mscc_switch_reset() argument
19 Though, one can enter ADFU mode and flash debian image(from host machine) where28 the ADFU button, after connecting it will enter the ADFU mode.36 also enter into the ADFU mode.
17 recommened to enter it in EL3 if U-Boot takes some responsibilities of a39 enter slave_cpu branch execution in start.S. The location address
50 button-enter {
20 to enter in intercative mode type 'd' during SPL DDR driver
27 On your U-Boot console, type this command to enter rockusb mode.
37 After that press 'enter' at the SCC console. Note that baudrates <38400
90 /* enter this condition if device
44 .macro enter reg1 reg2 macro64 enter r4, lr
51 enter in SDP mode in case an SD Card is not connect or boot switches are
212 enter {
353 enter {
325 The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h)344 first stage in segments and enter multiple times. E.g. on358 first stage in segments and enter multiple times. E.g. on
171 enter automatically to self-refresh while the
182 example is the Compulab Trimslice), so a method to enter RCM from
35 disabled the builtin watchdog you might have to manually enter failsafe
Completed in 39 milliseconds