/u-boot/include/dt-bindings/pinctrl/ |
A D | omap.h | 59 #define OMAP_IOPAD_OFFSET(pa, offset) (((pa) & 0xffff) - (offset)) argument 61 #define OMAP2420_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0030) (val) argument 62 #define OMAP2430_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2030) (val) argument 63 #define OMAP3_CORE1_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2030) (val) argument 64 #define OMAP3430_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25d8) (val) argument 65 #define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val) argument 66 #define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val) argument 67 #define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) argument 68 #define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) argument 69 #define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) argument
|
A D | k3.h | 35 #define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) argument 36 #define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) argument 38 #define J721E_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) argument 39 #define J721E_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) argument
|
A D | am43xx.h | 37 #define AM4372_IOPAD(pa, val) (((pa) & 0xffff) - 0x0800) (val) argument
|
A D | dra.h | 74 #define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val) argument
|
/u-boot/arch/arm/lib/ |
A D | cache-pl310.c | 55 u32 pa, line_size = 32; in v7_outer_cache_flush_range() local 63 for (pa = start; pa < stop; pa = pa + line_size) in v7_outer_cache_flush_range() 64 writel(pa, &pl310->pl310_clean_inv_line_pa); in v7_outer_cache_flush_range() 73 u32 pa, line_size = 32; in v7_outer_cache_inval_range() local 97 for (pa = start; pa < stop; pa = pa + line_size) in v7_outer_cache_inval_range() 98 writel(pa, &pl310->pl310_inv_line_pa); in v7_outer_cache_inval_range()
|
/u-boot/tools/ |
A D | img2srec.c | 170 *pa++ = ByteToHex[temp]; in WriteHex() 172 *pa++ = ByteToHex[temp]; in WriteHex() 173 return pa; in WriteHex() 200 return pa; in BuildSRecord() 203 *pa++ = 'S'; in BuildSRecord() 207 pa = WriteHex(pa, (uint8_t)sRLen, &checkSum); in BuildSRecord() 211 pa = WriteHex(pa, (uint8_t)(addr >> (8 * (addrLen - i))), &checkSum); in BuildSRecord() 216 pa = WriteHex(pa, *data++, &checkSum); in BuildSRecord() 221 pa = WriteHex(pa, (uint8_t)checkSum, &checkSum); in BuildSRecord() 222 *pa++ = '\0'; in BuildSRecord() [all …]
|
/u-boot/fs/yaffs2/ |
A D | yaffs_qsort.c | 64 char *pa, *pb, *pc, *pd, *pl, *pm, *pn; in yaffs_qsort() local 90 pa = pb = (char *)a + es; in yaffs_qsort() 97 yswap(pa, pb); in yaffs_qsort() 98 pa += es; in yaffs_qsort() 126 r = min(pa - (char *)a, pb - pa); in yaffs_qsort() 130 r = pb - pa; in yaffs_qsort()
|
/u-boot/lib/ |
A D | of_live.c | 176 const char *p1 = pathp, *ps = pathp, *pa = NULL; in unflatten_dt_node() local 181 pa = p1; in unflatten_dt_node() 186 if (pa < ps) in unflatten_dt_node() 187 pa = p1; in unflatten_dt_node() 188 sz = (pa - ps) + 1; in unflatten_dt_node()
|
/u-boot/drivers/net/ |
A D | ftmac110.c | 126 uint16_t pa, tmp, bmsr, bmcr; in ftmac110_phyqry() local 133 for (pa = 0; pa < 32; ++pa) { in ftmac110_phyqry() 134 tmp = mdio_read(dev, pa, MII_PHYSID1); in ftmac110_phyqry() 137 chip->phy_addr = pa; in ftmac110_phyqry() 140 if (pa >= 32) { in ftmac110_phyqry()
|
A D | dc2114x.c | 287 char *pa = &setup_frame[0]; in send_setup_frame() local 290 memset(pa, 0xff, SETUP_FRAME_LEN); in send_setup_frame() 293 *(pa + (i & 1)) = priv->enetaddr[i]; in send_setup_frame() 295 pa += 4; in send_setup_frame()
|
/u-boot/drivers/misc/ |
A D | sifive-otp.c | 75 u32 pa; /* Address input */ member 133 writel(fuseidx, ®s->pa); in sifive_otp_read() 195 writel(PA_RESET_VAL, ®s->pa); in sifive_otp_write() 208 writel(fuseidx, ®s->pa); in sifive_otp_write()
|
/u-boot/board/freescale/corenet_ds/ |
A D | eth_p4080.c | 224 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, in board_ft_fman_fixup_port() argument 228 fdt_set_phy_handle(blob, prop, pa, "phy_rgmii"); in board_ft_fman_fixup_port() 236 fdt_set_phy_handle(blob, prop, pa, phy); in board_ft_fman_fixup_port()
|
/u-boot/arch/mips/dts/ |
A D | mediatek,mt7620-mt7530-rfb.dts | 39 groups = "pa", "uartf";
|
/u-boot/drivers/pci/ |
A D | pci_common.c | 148 phys_addr_t *pa) in __pci_hose_bus_to_phys() argument 164 *pa = (bus_addr - res->bus_start + res->phys_start); in __pci_hose_bus_to_phys()
|
/u-boot/arch/powerpc/dts/ |
A D | Makefile | 12 dtb-$(CONFIG_TARGET_P1010RDB_PA) += p1010rdb-pa.dtb p1010rdb-pa_36b.dtb
|
/u-boot/configs/ |
A D | P1010RDB-PA_NOR_defconfig | 5 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
|
A D | P1010RDB-PA_SDCARD_defconfig | 12 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
|
A D | P1010RDB-PA_SPIFLASH_defconfig | 14 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
|
A D | P1010RDB-PA_NAND_defconfig | 11 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
|
/u-boot/drivers/net/fm/ |
A D | init.c | 233 __def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, in __def_board_ft_fman_fixup_port() argument 239 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
|
/u-boot/arch/arm/dts/ |
A D | sun8i-a23-q8-tablet.dts | 53 allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
|
A D | sunxi-libretech-all-h3-it.dtsi | 144 vcc-pa-supply = <®_vcc_io>;
|
A D | sun8i-v40-bananapi-m2-berry.dts | 179 vcc-pa-supply = <®_aldo2>; 190 regulator-name = "vcc-pa";
|
A D | sun5i-a13-utoo-p66.dts | 79 allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
|
/u-boot/drivers/ata/ |
A D | ahci.c | 514 phys_addr_t pa = (unsigned long)buf + i * MAX_DATA_BYTE_COUNT; in ahci_fill_sg() local 516 ahci_sg->addr = cpu_to_le32(lower_32_bits(pa)); in ahci_fill_sg() 517 ahci_sg->addr_hi = cpu_to_le32(upper_32_bits(pa)); in ahci_fill_sg()
|