| /u-boot/board/freescale/ls1043aqds/ |
| A D | ddr.c | 42 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
47 popts->write_data_delay = in fsl_ddr_board_options()
73 popts->data_bus_width = 1; in fsl_ddr_board_options()
74 popts->otf_burst_chop_en = 0; in fsl_ddr_board_options()
75 popts->burst_length = DDR_BL8; in fsl_ddr_board_options()
86 popts->wrlvl_override = 1; in fsl_ddr_board_options()
87 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
92 popts->rtt_override = 0; in fsl_ddr_board_options()
95 popts->zq_en = 1; in fsl_ddr_board_options()
103 popts->cpo_sample = 0x59; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/keymile/kmcent2/ |
| A D | ddr.c | 32 popts->write_data_delay = 4; in fsl_ddr_board_options()
34 popts->clk_adjust = 4; in fsl_ddr_board_options()
36 popts->twot_en = 0; in fsl_ddr_board_options()
37 popts->threet_en = 0; in fsl_ddr_board_options()
40 popts->cpo_sample = 0x3b; in fsl_ddr_board_options()
43 popts->half_strength_driver_enable = 1; in fsl_ddr_board_options()
48 popts->wrlvl_override = 1; in fsl_ddr_board_options()
49 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
50 popts->wrlvl_start = 0x7; in fsl_ddr_board_options()
64 popts->rtt_override = 0; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/ls1046aqds/ |
| A D | ddr.c | 42 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
60 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
61 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; in fsl_ddr_board_options()
70 popts->otf_burst_chop_en = 0; in fsl_ddr_board_options()
71 popts->burst_length = DDR_BL8; in fsl_ddr_board_options()
74 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
78 popts->wrlvl_override = 1; in fsl_ddr_board_options()
79 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
84 popts->rtt_override = 0; in fsl_ddr_board_options()
87 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/drivers/ddr/fsl/ |
| A D | options.c | 895 popts->ecc_mode = 1; in populate_memctl_options()
897 popts->ecc_mode = 1; in populate_memctl_options()
900 popts->ecc_init_using_memctl = popts->ecc_mode ? 1 : 0; in populate_memctl_options()
960 if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) { in populate_memctl_options()
1013 popts->twot_en = 0; in populate_memctl_options()
1014 popts->threet_en = 0; in populate_memctl_options()
1026 popts->ap_en = 1; in populate_memctl_options()
1062 popts->zq_en = 0; in populate_memctl_options()
1063 popts->wrlvl_en = 0; in populate_memctl_options()
1070 popts->wrlvl_en = 1; in populate_memctl_options()
[all …]
|
| A D | ctrl_regs.c | 437 if (popts->trwt_override) in set_timing_cfg_0()
438 trwt_mclk = popts->trwt; in set_timing_cfg_0()
933 ap_en = popts->ap_en; in set_ddr_sdram_cfg_2()
993 if (popts->rtt_override) in set_ddr_sdram_mode_2()
1079 if (popts->rtt_override) in set_ddr_sdram_mode_2()
1647 popts->burst_length); in set_ddr_sdram_mode()
1821 popts->burst_length); in set_ddr_sdram_mode()
2311 if (popts->addr_hash) { in set_ddr_eor()
2388 ? popts->sr_it in compute_fsl_memctl_config_regs()
2587 if (popts->cpo_sample) in compute_fsl_memctl_config_regs()
[all …]
|
| /u-boot/board/freescale/ls1046ardb/ |
| A D | ddr.c | 33 if (popts->registered_dimm_en) in fsl_ddr_board_options()
45 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
46 popts->wrlvl_start = pbsp->wrlvl_start; in fsl_ddr_board_options()
63 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
64 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; in fsl_ddr_board_options()
79 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
83 popts->wrlvl_override = 1; in fsl_ddr_board_options()
84 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
89 popts->rtt_override = 0; in fsl_ddr_board_options()
92 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/t104xrdb/ |
| A D | ddr.c | 46 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
47 popts->wrlvl_start = pbsp->wrlvl_start; in fsl_ddr_board_options()
64 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
65 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; in fsl_ddr_board_options()
82 popts->half_strength_driver_enable = 1; in fsl_ddr_board_options()
84 popts->cpo_sample = 0x59; in fsl_ddr_board_options()
86 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
91 popts->wrlvl_override = 1; in fsl_ddr_board_options()
92 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
97 popts->rtt_override = 0; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/ls1021aqds/ |
| A D | ddr.c | 42 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
47 popts->write_data_delay = in fsl_ddr_board_options()
73 popts->data_bus_width = 1; in fsl_ddr_board_options()
74 popts->otf_burst_chop_en = 0; in fsl_ddr_board_options()
75 popts->burst_length = DDR_BL8; in fsl_ddr_board_options()
85 popts->wrlvl_override = 1; in fsl_ddr_board_options()
86 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
91 popts->rtt_override = 0; in fsl_ddr_board_options()
94 popts->zq_en = 1; in fsl_ddr_board_options()
101 popts->cswl_override = DDR_CSWL_CS0; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/t4rdb/ |
| A D | ddr.c | 38 if (popts->registered_dimm_en) in fsl_ddr_board_options()
52 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
53 popts->wrlvl_start = pbsp->wrlvl_start; in fsl_ddr_board_options()
70 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
71 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; in fsl_ddr_board_options()
87 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
91 popts->wrlvl_override = 1; in fsl_ddr_board_options()
92 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
97 popts->rtt_override = 0; in fsl_ddr_board_options()
100 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/ls1088a/ |
| A D | ddr.c | 28 popts->ddr_cdr1 |= DDR_CDR1_V0PT9_EN; in fsl_ddr_setup_0v9_volt()
61 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
62 popts->wrlvl_start = pbsp->wrlvl_start; in fsl_ddr_board_options()
79 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
80 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; in fsl_ddr_board_options()
93 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
97 popts->wrlvl_override = 1; in fsl_ddr_board_options()
98 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
102 popts->zq_en = 1; in fsl_ddr_board_options()
105 popts->addr_hash = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/ls2080ardb/ |
| A D | ddr.c | 45 if (popts->registered_dimm_en) in fsl_ddr_board_options()
89 if (popts->registered_dimm_en) in fsl_ddr_board_options()
92 popts->data_bus_width = 1; in fsl_ddr_board_options()
93 popts->otf_burst_chop_en = 0; in fsl_ddr_board_options()
94 popts->burst_length = DDR_BL8; in fsl_ddr_board_options()
130 popts->wrlvl_override = 1; in fsl_ddr_board_options()
136 popts->rtt_override = 0; in fsl_ddr_board_options()
139 popts->zq_en = 1; in fsl_ddr_board_options()
142 popts->cpo_sample = 0x6e; in fsl_ddr_board_options()
147 popts->ddr_cdr1 = DDR_CDR1_DHC_EN | in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/t208xqds/ |
| A D | ddr.c | 38 if (popts->registered_dimm_en) in fsl_ddr_board_options()
51 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
52 popts->wrlvl_start = pbsp->wrlvl_start; in fsl_ddr_board_options()
69 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
70 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; in fsl_ddr_board_options()
86 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
90 popts->wrlvl_override = 1; in fsl_ddr_board_options()
91 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
96 popts->rtt_override = 0; in fsl_ddr_board_options()
99 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/keymile/kmp204x/ |
| A D | ddr.c | 21 void fsl_ddr_board_options(memctl_options_t *popts, in fsl_ddr_board_options() argument
31 popts->cpo_override = 0xFF; in fsl_ddr_board_options()
34 popts->write_data_delay = 4; in fsl_ddr_board_options()
36 popts->clk_adjust = 4; in fsl_ddr_board_options()
38 popts->twot_en = 0; in fsl_ddr_board_options()
41 popts->half_strength_driver_enable = 1; in fsl_ddr_board_options()
44 popts->wrlvl_override = 1; in fsl_ddr_board_options()
45 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
46 popts->wrlvl_start = 0x6; in fsl_ddr_board_options()
49 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/p2041rdb/ |
| A D | ddr.c | 76 popts->cpo_override = pbsp->cpo; in fsl_ddr_board_options()
77 popts->write_data_delay = in fsl_ddr_board_options()
79 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
81 popts->twot_en = pbsp->force_2t; in fsl_ddr_board_options()
94 popts->cpo_override = pbsp_highest->cpo; in fsl_ddr_board_options()
108 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
110 popts->wrlvl_override = 1; in fsl_ddr_board_options()
111 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
114 popts->rtt_override = 0; in fsl_ddr_board_options()
117 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/t208xrdb/ |
| A D | ddr.c | 44 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
45 popts->wrlvl_start = pbsp->wrlvl_start; in fsl_ddr_board_options()
46 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
62 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
63 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; in fsl_ddr_board_options()
79 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
83 popts->wrlvl_override = 1; in fsl_ddr_board_options()
84 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
89 popts->rtt_override = 0; in fsl_ddr_board_options()
92 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/varisys/cyrus/ |
| A D | ddr.c | 112 if (popts->registered_dimm_en) in fsl_ddr_board_options()
125 popts->cpo_override = pbsp->cpo; in fsl_ddr_board_options()
126 popts->write_data_delay = in fsl_ddr_board_options()
128 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
130 popts->twot_en = pbsp->force_2t; in fsl_ddr_board_options()
154 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
158 popts->wrlvl_override = 1; in fsl_ddr_board_options()
159 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
164 popts->rtt_override = 0; in fsl_ddr_board_options()
167 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/ls2080aqds/ |
| A D | ddr.c | 45 if (popts->registered_dimm_en) in fsl_ddr_board_options()
59 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
90 popts->data_bus_width = 1; in fsl_ddr_board_options()
91 popts->otf_burst_chop_en = 0; in fsl_ddr_board_options()
92 popts->burst_length = DDR_BL8; in fsl_ddr_board_options()
128 popts->wrlvl_override = 1; in fsl_ddr_board_options()
134 popts->rtt_override = 0; in fsl_ddr_board_options()
137 popts->zq_en = 1; in fsl_ddr_board_options()
142 popts->ddr_cdr1 = DDR_CDR1_DHC_EN | in fsl_ddr_board_options()
147 popts->ddr_cdr1 = DDR_CDR1_DHC_EN | in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/xes/xpedite550x/ |
| A D | ddr.c | 86 popts->cs_local_opts[i].odt_rd_cfg = 0; in fsl_ddr_board_options()
87 popts->cs_local_opts[i].odt_wr_cfg = 0; in fsl_ddr_board_options()
90 popts->cs_local_opts[i].odt_rd_cfg = 0; in fsl_ddr_board_options()
91 popts->cs_local_opts[i].odt_wr_cfg = 4; in fsl_ddr_board_options()
93 popts->cs_local_opts[i].odt_rd_cfg = 3; in fsl_ddr_board_options()
108 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
109 popts->cpo_override = pbsp->cpo; in fsl_ddr_board_options()
110 popts->twot_en = 0; in fsl_ddr_board_options()
125 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
133 popts->rtt_override = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/t102xrdb/ |
| A D | ddr.c | 78 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
96 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; in fsl_ddr_board_options()
112 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
116 popts->wrlvl_override = 1; in fsl_ddr_board_options()
117 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
122 popts->rtt_override = 0; in fsl_ddr_board_options()
125 popts->zq_en = 1; in fsl_ddr_board_options()
143 popts->wrlvl_ctl_2 = 0x07070606; in fsl_ddr_board_options()
144 popts->half_strength_driver_enable = 1; in fsl_ddr_board_options()
145 popts->cpo_sample = 0x43; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/ls1043ardb/ |
| A D | ddr.c | 43 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
48 popts->write_data_delay = in fsl_ddr_board_options()
74 popts->data_bus_width = 1; in fsl_ddr_board_options()
75 popts->otf_burst_chop_en = 0; in fsl_ddr_board_options()
76 popts->burst_length = DDR_BL8; in fsl_ddr_board_options()
82 popts->half_strength_driver_enable = 1; in fsl_ddr_board_options()
86 popts->wrlvl_override = 1; in fsl_ddr_board_options()
87 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
92 popts->rtt_override = 0; in fsl_ddr_board_options()
95 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/mpc8349emds/ |
| A D | ddr.c | 42 void fsl_ddr_board_options(memctl_options_t *popts, in fsl_ddr_board_options() argument
68 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
69 popts->cpo_override = pbsp->cpo; in fsl_ddr_board_options()
70 popts->write_data_delay = in fsl_ddr_board_options()
72 popts->twot_en = pbsp->force_2t; in fsl_ddr_board_options()
85 popts->clk_adjust = pbsp_highest->clk_adjust; in fsl_ddr_board_options()
86 popts->cpo_override = pbsp_highest->cpo; in fsl_ddr_board_options()
87 popts->write_data_delay = pbsp_highest->write_data_delay; in fsl_ddr_board_options()
88 popts->twot_en = pbsp_highest->force_2t; in fsl_ddr_board_options()
98 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/Arcturus/ucp1020/ |
| A D | ddr.c | 138 popts->clk_adjust = 6; in fsl_ddr_board_options()
139 popts->cpo_override = 0x1f; in fsl_ddr_board_options()
140 popts->write_data_delay = 2; in fsl_ddr_board_options()
143 popts->wrlvl_en = 1; in fsl_ddr_board_options()
144 popts->wrlvl_override = 1; in fsl_ddr_board_options()
145 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
146 popts->wrlvl_start = 0x8; in fsl_ddr_board_options()
147 popts->trwt_override = 1; in fsl_ddr_board_options()
148 popts->trwt = 0; in fsl_ddr_board_options()
151 popts->data_bus_width = 0; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/freescale/corenet_ds/ |
| A D | ddr.c | 203 if (popts->registered_dimm_en) in fsl_ddr_board_options()
216 popts->cpo_override = pbsp->cpo; in fsl_ddr_board_options()
217 popts->write_data_delay = in fsl_ddr_board_options()
219 popts->clk_adjust = pbsp->clk_adjust; in fsl_ddr_board_options()
221 popts->twot_en = pbsp->force_2t; in fsl_ddr_board_options()
247 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
251 popts->wrlvl_override = 1; in fsl_ddr_board_options()
252 popts->wrlvl_sample = 0xf; in fsl_ddr_board_options()
257 popts->rtt_override = 0; in fsl_ddr_board_options()
260 popts->zq_en = 1; in fsl_ddr_board_options()
[all …]
|
| /u-boot/board/gdsys/p1022/ |
| A D | ddr.c | 15 void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, in fsl_ddr_board_options() argument
29 popts->cs_local_opts[i].odt_rd_cfg = 0; in fsl_ddr_board_options()
30 popts->cs_local_opts[i].odt_wr_cfg = 1; in fsl_ddr_board_options()
33 popts->clk_adjust = 5; in fsl_ddr_board_options()
34 popts->cpo_override = 0x1f; in fsl_ddr_board_options()
35 popts->write_data_delay = 2; in fsl_ddr_board_options()
36 popts->half_strength_driver_enable = 1; in fsl_ddr_board_options()
39 popts->zq_en = 1; in fsl_ddr_board_options()
|
| /u-boot/board/socrates/ |
| A D | ddr.c | 11 void fsl_ddr_board_options(memctl_options_t *popts, in fsl_ddr_board_options() argument
26 popts->clk_adjust = 7; in fsl_ddr_board_options()
33 popts->cpo_override = 0; in fsl_ddr_board_options()
46 popts->write_data_delay = 3; in fsl_ddr_board_options()
52 popts->half_strength_driver_enable = 0; in fsl_ddr_board_options()
|