| /u-boot/arch/arm/dts/ |
| A D | s5p4418-pinctrl.dtsi | 27 pin-strength = <2>;
34 pin-strength = <1>;
41 pin-strength = <1>;
48 pin-strength = <2>;
55 pin-strength = <1>;
62 pin-strength = <1>;
69 pin-strength = <2>;
76 pin-strength = <1>;
83 pin-strength = <1>;
90 pin-strength = <1>;
[all …]
|
| A D | imx28.dtsi | 224 fsl,drive-strength = <MXS_DRIVE_4mA>;
235 fsl,drive-strength = <MXS_DRIVE_4mA>;
248 fsl,drive-strength = <MXS_DRIVE_4mA>;
272 fsl,drive-strength = <MXS_DRIVE_4mA>;
295 fsl,drive-strength = <MXS_DRIVE_4mA>;
306 fsl,drive-strength = <MXS_DRIVE_4mA>;
319 fsl,drive-strength = <MXS_DRIVE_4mA>;
330 fsl,drive-strength = <MXS_DRIVE_4mA>;
341 fsl,drive-strength = <MXS_DRIVE_4mA>;
352 fsl,drive-strength = <MXS_DRIVE_4mA>;
[all …]
|
| A D | meson-g12-common.dtsi | 349 drive-strength-microamp = <4000>;
356 drive-strength-microamp = <4000>;
368 drive-strength-microamp = <4000>;
384 drive-strength-microamp = <4000>;
393 drive-strength-microamp = <4000>;
402 drive-strength-microamp = <4000>;
412 drive-strength-microamp = <4000>;
786 drive-strength-microamp = <500>;
795 drive-strength-microamp = <500>;
804 drive-strength-microamp = <500>;
[all …]
|
| A D | hikey960-pinctrl.dtsi | 345 pinctrl-single,drive-strength = <
367 pinctrl-single,drive-strength = <
388 pinctrl-single,drive-strength = <
409 pinctrl-single,drive-strength = <
432 pinctrl-single,drive-strength = <
454 pinctrl-single,drive-strength = <
475 pinctrl-single,drive-strength = <
499 pinctrl-single,drive-strength = <
523 pinctrl-single,drive-strength = <
547 pinctrl-single,drive-strength = <
[all …]
|
| A D | poplar-pinctrl.dtsi | 40 pinctrl-single,drive-strength = <
58 pinctrl-single,drive-strength = <
76 pinctrl-single,drive-strength = <
94 pinctrl-single,drive-strength = <
|
| A D | imx23.dtsi | 150 fsl,drive-strength = <MXS_DRIVE_4mA>;
163 fsl,drive-strength = <MXS_DRIVE_4mA>;
174 fsl,drive-strength = <MXS_DRIVE_4mA>;
185 fsl,drive-strength = <MXS_DRIVE_4mA>;
211 fsl,drive-strength = <MXS_DRIVE_4mA>;
223 fsl,drive-strength = <MXS_DRIVE_12mA>;
236 fsl,drive-strength = <MXS_DRIVE_8mA>;
256 fsl,drive-strength = <MXS_DRIVE_8mA>;
288 fsl,drive-strength = <MXS_DRIVE_8mA>;
307 fsl,drive-strength = <MXS_DRIVE_8mA>;
[all …]
|
| A D | hihope-rzg2-ex.dtsi | 61 drive-strength = <24>;
67 drive-strength = <12>;
|
| A D | uniphier-pxs3-ref.dts | 140 drive-strength = <9>;
148 drive-strength = <9>;
|
| A D | armada-xp-db-xc3-24g4xg-u-boot.dtsi | 14 nand-ecc-strength = <4>;
|
| A D | mt8512-bm1-emmc.dts | 93 drive-strength = <6>;
99 drive-strength = <6>;
|
| A D | mt7623n-bananapi-bpi-r2.dts | 120 drive-strength = <12>;
160 drive-strength = <4>;
166 drive-strength = <4>;
|
| /u-boot/doc/device-tree-bindings/mtd/ |
| A D | stm32-fmc2-nand.txt | 28 - nand-ecc-strength: see nand.txt
31 The following ECC strength and step size are currently supported:
32 - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)
33 - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
34 - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default)
|
| /u-boot/doc/device-tree-bindings/pinctrl/ |
| A D | nexell,s5pxx18-pinctrl.txt | 36 - pin-strength = Drive strength configuration.
46 Valid values for nexell,pin-strength are:
56 pin-strength = <2>;
63 pin-strength = <1>;
70 pin-strength = <1>;
|
| A D | kendryte,k210-fpioa.txt | 38 bias-disable, bias-pull-down, bias-pull-up, drive-strength,
39 drive-strength-ua, input-enable, input-disable, input-schmitt-enable,
47 - bias-pull-up, -down, and -pin-default: The pull strength cannot be configured.
48 - drive-strength: There are 8 drive strength settings between 11 and 50 mA.
74 drive-strength = <11>;
|
| /u-boot/drivers/mtd/nand/spi/ |
| A D | macronix.c | 85 return nand->eccreq.strength; in mx35lf1ge4ab_ecc_get_status()
87 if (WARN_ON(eccsr > nand->eccreq.strength || !eccsr)) in mx35lf1ge4ab_ecc_get_status()
88 return nand->eccreq.strength; in mx35lf1ge4ab_ecc_get_status()
|
| A D | toshiba.c | 96 return nand->eccreq.strength; in tx58cxgxsxraix_ecc_get_status()
100 if (WARN_ON(mbf > nand->eccreq.strength || !mbf)) in tx58cxgxsxraix_ecc_get_status()
101 return nand->eccreq.strength; in tx58cxgxsxraix_ecc_get_status()
|
| /u-boot/arch/arm/mach-omap2/omap3/ |
| A D | board.c | 290 int hw, strength = 1; in do_switch_ecc() local
299 strength = 8; in do_switch_ecc()
301 strength = 16; in do_switch_ecc()
309 strength = 8; in do_switch_ecc()
317 return -omap_nand_switch_ecc(hw, strength); in do_switch_ecc()
|
| /u-boot/doc/device-tree-bindings/net/phy/ |
| A D | atheros.txt | 9 - qca,clk-out-strength: Clock output buffer driver strength.
|
| /u-boot/drivers/pinctrl/rockchip/ |
| A D | pinctrl-rk3368.c | 122 int pin_num, int strength) in rk3368_set_drive() argument
131 ret = rockchip_translate_drive_value(type, strength); in rk3368_set_drive()
133 debug("unsupported driver strength %d\n", strength); in rk3368_set_drive()
|
| A D | pinctrl-rk3288.c | 164 int pin_num, int strength) in rk3288_set_drive() argument
173 ret = rockchip_translate_drive_value(type, strength); in rk3288_set_drive()
175 debug("unsupported driver strength %d\n", strength); in rk3288_set_drive()
|
| A D | pinctrl-rk322x.c | 241 int pin_num, int strength) in rk3228_set_drive() argument
250 ret = rockchip_translate_drive_value(type, strength); in rk3228_set_drive()
252 debug("unsupported driver strength %d\n", strength); in rk3228_set_drive()
|
| A D | pinctrl-rv1108.c | 189 int pin_num, int strength) in rv1108_set_drive() argument
198 ret = rockchip_translate_drive_value(type, strength); in rv1108_set_drive()
200 debug("unsupported driver strength %d\n", strength); in rv1108_set_drive()
|
| A D | pinctrl-rk3399.c | 167 int pin_num, int strength) in rk3399_set_drive() argument
176 ret = rockchip_translate_drive_value(drv_type, strength); in rk3399_set_drive()
178 debug("unsupported driver strength %d\n", strength); in rk3399_set_drive()
|
| /u-boot/doc/device-tree-bindings/gpio/ |
| A D | intel,x86-pinctrl.txt | 21 - pull-strength - (optional) this set the pull strength of the pin
|
| /u-boot/drivers/mtd/nand/raw/ |
| A D | pxa3xx_nand.c | 1287 NULL, 0, chip->ecc.strength); in pxa3xx_nand_read_page_hwecc()
1550 int strength, int ecc_stepsize, int page_size) in pxa_ecc_init() argument
1560 ecc->strength = 1; in pxa_ecc_init()
1570 ecc->strength = 1; in pxa_ecc_init()
1586 ecc->strength = 16; in pxa_ecc_init()
1598 ecc->strength = 16; in pxa_ecc_init()
1610 ecc->strength = 16; in pxa_ecc_init()
1628 ecc->strength = 16; in pxa_ecc_init()
1642 ecc->strength = 16; in pxa_ecc_init()
1656 ecc->strength = 16; in pxa_ecc_init()
[all …]
|