| /u-boot/arch/arm/mach-at91/arm920t/ |
| A D | timer.c | 34 at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC; in timer_init() local
38 writel(0, &tc->bcr); in timer_init()
40 AT91_TC_BMR_TC2XC2S_NONE , &tc->bmr); in timer_init()
42 writel(AT91_TC_CCR_CLKDIS, &tc->tc[0].ccr); in timer_init()
45 writel(AT91_TC_CMR_TCCLKS_CLOCK1 | AT91_TC_CMR_CPCTRG, &tc->tc[0].cmr); in timer_init()
47 writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interrupts */ in timer_init()
48 writel(TIMER_LOAD_VAL, &tc->tc[0].rc); in timer_init()
50 writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr); in timer_init()
62 at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC; in get_timer_raw() local
65 now = readl(&tc->tc[0].cv) & 0x0000ffff; in get_timer_raw()
|
| /u-boot/arch/arm/mach-lpc32xx/ |
| A D | timer.c | 31 writel(0, &timer->tc); in lpc32xx_timer_reset()
63 return readl(&timer0->tc) - base; in get_timer()
72 while (readl(&timer1->tc) < usec) in __udelay()
|
| /u-boot/drivers/spi/ |
| A D | atcspi200_spi.c | 143 int tc = ns->regs->tctrl; in __atcspi200_spi_start() local
145 tc &= ~(WCNT_MASK|RCNT_MASK|TRAMODE_MASK); in __atcspi200_spi_start()
147 tc |= TRAMODE_WR; in __atcspi200_spi_start()
149 tc |= TRAMODE_RO; in __atcspi200_spi_start()
151 tc |= TRAMODE_WO; in __atcspi200_spi_start()
155 tc |= (ns->cmd_len+olen-1) << WCNT_OFFSET; in __atcspi200_spi_start()
158 tc |= (ns->tran_len-1) << RCNT_OFFSET; in __atcspi200_spi_start()
160 ns->regs->tctrl = tc; in __atcspi200_spi_start()
|
| A D | ca_sflash.c | 30 u32 tc; /* 0x04:Flash Timeout Counter Register */ member
|
| /u-boot/doc/device-tree-bindings/rtc/ |
| A D | abracon,abx80x.txt | 29 - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
30 - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
|
| /u-boot/tools/buildman/ |
| A D | test.py | 591 tc = self.toolchains.Select('arm')
593 tc.GetEnvArgs(toolchain.VAR_CROSS_COMPILE))
594 self.assertEqual('', tc.GetEnvArgs(toolchain.VAR_PATH))
596 tc.GetEnvArgs(toolchain.VAR_ARCH))
597 self.assertEqual('', tc.GetEnvArgs(toolchain.VAR_MAKE_ARGS))
600 tc = self.toolchains.Select('x86')
602 tc.GetEnvArgs(toolchain.VAR_PATH))
603 tc.override_toolchain = 'clang'
605 tc.GetEnvArgs(toolchain.VAR_MAKE_ARGS))
|
| A D | control.py | 108 tc = tc_set.pop()
109 print(tc.GetEnvArgs(toolchain.VAR_CROSS_COMPILE))
|
| /u-boot/arch/arm/mach-at91/include/mach/ |
| A D | at91_tc.h | 40 at91_tcc_t tc[3]; /* 0x00 TC Channel 0-2 */ member
|
| /u-boot/drivers/net/fsl-mc/ |
| A D | dpni.c | 428 uint8_t tc, in dpni_set_queue() argument
437 DPNI_CMD_SET_QUEUE(cmd, type, tc, index, queue); in dpni_set_queue()
447 uint8_t tc, in dpni_get_queue() argument
458 DPNI_CMD_GET_QUEUE(cmd, type, tc, index); in dpni_get_queue()
|
| /u-boot/arch/arm/include/asm/arch-lpc32xx/ |
| A D | timer.h | 15 u32 tc; /* Timer Counter */ member
|
| /u-boot/include/fsl-mc/ |
| A D | fsl_dpni.h | 222 #define DPNI_CMD_GET_QUEUE(cmd, type, tc, index) \ argument
225 MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc); \
241 #define DPNI_CMD_SET_QUEUE(cmd, type, tc, index, queue) \ argument
244 MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc); \
1224 uint8_t tc,
1245 uint8_t tc,
|
| /u-boot/drivers/mtd/nand/raw/ |
| A D | lpc32xx_nand_slc.c | 39 u32 tc; member
310 readl(&lpc32xx_nand_slc_regs->tc))) { in lpc32xx_nand_xfer()
312 writel(len + tmp, &lpc32xx_nand_slc_regs->tc); in lpc32xx_nand_xfer()
|
| /u-boot/doc/device-tree-bindings/exynos/ |
| A D | tmu.txt | 23 - It sets the gain of amplifier to the positive-tc generator block.
|
| /u-boot/drivers/net/ |
| A D | xilinx_axi_emac.c | 134 u32 tc; /* 0x408: Tx Configuration */ member
519 writel(XAE_TC_TX_MASK, ®s->tc); in axiemac_start()
|