/linux/arch/arm/boot/dts/ |
A D | at91-natte.dtsi | 71 ti,charge-current = <2000>; 72 ti,charge-voltage = <16800>; 87 ti,charge-current = <2000>; 88 ti,charge-voltage = <16800>; 103 ti,charge-current = <2000>; 104 ti,charge-voltage = <16800>; 119 ti,charge-current = <2000>; 135 ti,charge-current = <2000>; 151 ti,charge-current = <2000>; 167 ti,charge-current = <2000>; [all …]
|
/linux/Documentation/devicetree/bindings/power/supply/ |
A D | gpio-charger.yaml | 38 charge-status-gpios: 42 charge-current-limit-gpios: 47 charge-current-limit-mapping: 58 charge-current-limit-gpios property. Bit 1 second to last 68 - charge-status-gpios 70 - charge-current-limit-gpios 73 charge-current-limit-gpios: [ charge-current-limit-mapping ] 74 charge-current-limit-mapping: [ charge-current-limit-gpios ] 87 charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>; 89 charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>, [all …]
|
A D | qcom,pm8941-charger.yaml | 21 - description: charge done 22 - description: charge fast mode 23 - description: charge trickle mode 41 qcom,fast-charge-current-limit: 47 qcom,fast-charge-low-threshold-voltage: 55 qcom,fast-charge-high-threshold-voltage: 61 The fast charger will attempt to charge the battery to this voltage. 64 qcom,fast-charge-safe-voltage: 73 qcom,fast-charge-safe-current: 103 Default DC charge current limit in uA. Defaults to 100mA. [all …]
|
A D | richtek,rt9455.yaml | 25 richtek,output-charge-current: 29 richtek,end-of-charge-percentage: 32 percent of the output charge current. When the current in constant-voltage phase drops 33 below output_charge_current x end-of-charge-percentage, charge is terminated. 61 - richtek,output-charge-current 62 - richtek,end-of-charge-percentage 82 richtek,output-charge-current = <500000>; 83 richtek,end-of-charge-percentage = <10>;
|
A D | rohm,bd99954.yaml | 32 # a) Trickle-charge with constant current (8). 33 # b) pre-charge with constant current (6) 34 # c) fast-charge with: 69 # - trickle-charge-current-microamp: 70 # Current used at trickle-charge phase (8 in above chart) 75 # Current used at pre-charge phase (6 in above chart) 79 # - constant-charge-current-max-microamp 84 # - constant-charge-voltage-max-microvolt 95 # - re-charge-voltage-microvolt 107 # - charge-term-current-microamp [all …]
|
A D | battery.yaml | 51 re-charge-voltage-microvolt: 63 charge-full-design-microamp-hours: 66 trickle-charge-current-microamp: 67 description: current for trickle-charge phase 70 description: current for pre-charge phase 75 charge-term-current-microamp: 76 description: current for charge termination phase 78 constant-charge-current-max-microamp: 81 constant-charge-voltage-max-microvolt: 146 re-charge-voltage-microvolt = <250000>; [all …]
|
A D | sc2731-charger.yaml | 29 - charge-term-current-microamp: current for charge termination phase. 30 - constant-charge-voltage-max-microvolt: maximum constant input voltage. 39 charge-term-current-microamp = <120000>; 40 constant-charge-voltage-max-microvolt = <4350000>;
|
A D | summit,smb347-charger.yaml | 42 summit,enable-charge-control: 51 description: Voltage threshold to transit to fast charge mode (in uV) 61 summit,charge-current-compensation-microamp: 114 summit,charge-current-compensation-microamp: 127 summit,charge-current-compensation-microamp: 156 summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>; 179 constant-charge-current-max-microamp = <1800000>;
|
A D | cpcap-charger.yaml | 29 - description: reverse charge interrupt 33 - description: charge current 2 interrupt 34 - description: charge current 1 interrupt 55 - description: battery charge current 69 charge controller that is controlled with two GPIOs
|
A D | bq2515x.yaml | 15 The BQ2515x family is a highly integrated battery charge management IC that 48 charge-enable-gpios: 72 constant-charge-current-max-microamp = <50000>; 74 constant-charge-voltage-max-microvolt = <4000000>; 90 charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
A D | bq25890.yaml | 34 ti,charge-current: 41 charge will be terminated when current in constant-voltage phase 46 description: maximum charge current during precharge phase (in uA) 75 temperature above which the charge current is lowered, to avoid overheating 89 - ti,charge-current 113 ti,charge-current = <1000000>;
|
A D | sc27xx-fg.yaml | 38 - const: charge-vol 70 charge-full-design-microamp-hours = <1900000>; 71 constant-charge-voltage-max-microvolt = <4350000>; 92 io-channel-names = "bat-temp", "charge-vol";
|
A D | bq24190.yaml | 54 - precharge-current-microamp: maximum charge current during precharge phase 56 - charge-term-current-microamp: a charge cycle terminates when the battery voltage is 75 charge-term-current-microamp = <128000>;
|
A D | bq24257.yaml | 33 ti,charge-current: 40 charge will be terminated when current in constant-voltage phase 78 - ti,charge-current 100 ti,charge-current = <1000000>; 118 ti,charge-current = <500000>;
|
A D | bq2415x.yaml | 49 ti,charge-current: 56 charge will be terminated when current in constant-voltage phase drops 73 - ti,charge-current 92 ti,charge-current = <650>;
|
A D | bq256xx.yaml | 14 The bq256xx devices are a family of highly-integrated battery charge 82 constant-charge-current-max-microamp = <2040000>; 83 constant-charge-voltage-max-microvolt = <4352000>; 85 charge-term-current-microamp = <180000>;
|
/linux/drivers/macintosh/ |
A D | apm_emu.c | 25 long charge = -1; in pmu_apm_get_power_status() local 43 if (charge < 0) in pmu_apm_get_power_status() 44 charge = 0; in pmu_apm_get_power_status() 45 percentage += (pmu_batteries[i].charge * 100) / in pmu_apm_get_power_status() 47 charge += pmu_batteries[i].charge; in pmu_apm_get_power_status() 62 time_units = (charge * 59) / (amperage * -1); in pmu_apm_get_power_status() 64 time_units = (charge * 16440) / (amperage * -60); in pmu_apm_get_power_status()
|
/linux/Documentation/power/ |
A D | power_supply_class.rst | 88 batteries can typically charge at different rates. 125 design charge values, when battery considered full/empty. 140 the current charge counter (in µAh). This could easily 145 the maximum charge current during precharge phase of charge cycle 150 voltage is above recharge threshold, and charge current is below 154 constant charge current programmed by charger. 158 maximum charge current supported by the power supply object. 161 constant charge voltage programmed by charger. 163 maximum charge voltage supported by the power supply object. 176 current charge control limit setting [all …]
|
/linux/Documentation/ABI/testing/ |
A D | sysfs-driver-samsung-laptop | 27 Description: Max battery charge level can be modified, battery cycle 28 life can be extended by reducing the max battery charge 31 - 0 means normal battery mode (100% charge) 32 - 1 means battery life extender mode (80% charge) 38 Description: Use your USB ports to charge devices, even
|
A D | sysfs-bus-i2c-devices-bq32k | 5 Description: Attribute for enable/disable the trickle charge bypass 7 enable/disable the Trickle charge FET bypass.
|
/linux/arch/arm/mach-pxa/ |
A D | sharpsl_pm.c | 306 sharpsl_pm.machinfo->charge(0); in sharpsl_charge_off() 316 sharpsl_pm.machinfo->charge(0); in sharpsl_charge_error() 333 sharpsl_pm.machinfo->charge(0); in sharpsl_charge_toggle() 335 sharpsl_pm.machinfo->charge(1); in sharpsl_charge_toggle() 525 sharpsl_pm.machinfo->charge(0); in sharpsl_check_battery_voltage() 687 sharpsl_pm.machinfo->charge(0); in sharpsl_off_charge_error() 713 sharpsl_pm.machinfo->charge(0); in sharpsl_off_charge_battery() 715 sharpsl_pm.machinfo->charge(1); in sharpsl_off_charge_battery() 733 sharpsl_pm.machinfo->charge(0); in sharpsl_off_charge_battery() 735 sharpsl_pm.machinfo->charge(1); in sharpsl_off_charge_battery() [all …]
|
/linux/Documentation/devicetree/bindings/rtc/ |
A D | rtc-palmas.txt | 16 - ti,backup-battery-charge-high-current: Enable high current charging in 19 charge battery to lower current i.e. < 100uA. 29 ti,backup-battery-charge-high-current;
|
/linux/Documentation/devicetree/bindings/input/touchscreen/ |
A D | ti,am3359-tsc.yaml | 47 ti,charge-delay: 48 description: Length of touch screen charge delay step in terms of ADC clock 53 avoided. The pen-up detection happens immediately after the charge step, 75 ti,charge-delay = <0x400>;
|
/linux/Documentation/devicetree/bindings/sound/ |
A D | ti,tas5086.txt | 14 - ti,charge-period: This property should contain the time in microseconds 16 split-capacitor charge period. The hardware chip 44 ti,charge-period = <156000>;
|
/linux/Documentation/devicetree/bindings/iio/frequency/ |
A D | adi,adf4350.yaml | 72 adi,charge-pump-current: 99 adi,charge-cancellation-enable: 102 Enabled charge pump charge cancellation for integer-N modes. 185 adi,charge-pump-current = <2500>;
|