1Binding for a ST pll clock driver.
2
3This binding uses the common clock binding[1].
4Base address is located to the parent node. See clock binding[2]
5
6[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
7[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
8
9Required properties:
10
11- compatible : shall be:
12	"st,clkgen-pll0"
13	"st,clkgen-pll0-a0"
14	"st,clkgen-pll0-c0"
15	"st,clkgen-pll1"
16	"st,clkgen-pll1-c0"
17	"st,stih407-clkgen-plla9"
18	"st,stih418-clkgen-plla9"
19
20- #clock-cells : From common clock binding; shall be set to 1.
21
22- clocks : From common clock binding
23
24- clock-output-names : From common clock binding.
25
26Example:
27
28	clockgen-a9@92b0000 {
29		compatible = "st,clkgen-c32";
30		reg = <0x92b0000 0xffff>;
31
32		clockgen_a9_pll: clockgen-a9-pll {
33			#clock-cells = <1>;
34			compatible = "st,stih407-clkgen-plla9";
35
36			clocks = <&clk_sysin>;
37
38			clock-output-names = "clockgen-a9-pll-odf";
39		};
40	};
41