1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: LED driver for LP50XX RGB LED from Texas Instruments.
8
9maintainers:
10  - Dan Murphy <dmurphy@ti.com>
11
12description: |
13  The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
14  a LED group or control them individually.
15
16  The difference in these RGB LED drivers is the number of supported RGB
17  modules.
18
19  For more product information please see the link below:
20  https://www.ti.com/lit/ds/symlink/lp5012.pdf
21  https://www.ti.com/lit/ds/symlink/lp5024.pdf
22  https://www.ti.com/lit/ds/symlink/lp5036.pdf
23
24properties:
25  compatible:
26    enum:
27      - ti,lp5009
28      - ti,lp5012
29      - ti,lp5018
30      - ti,lp5024
31      - ti,lp5030
32      - ti,lp5036
33
34  reg:
35    maxItems: 1
36    description:
37      I2C slave address
38      lp5009/12 - 0x14, 0x15, 0x16, 0x17
39      lp5018/24 - 0x28, 0x29, 0x2a, 0x2b
40      lp5030/36 - 0x30, 0x31, 0x32, 0x33
41
42  enable-gpios:
43    maxItems: 1
44    description: GPIO pin to enable/disable the device.
45
46  vled-supply:
47    description: LED supply.
48
49  '#address-cells':
50    const: 1
51
52  '#size-cells':
53    const: 0
54
55patternProperties:
56  '^multi-led@[0-9a-f]$':
57    type: object
58    allOf:
59      - $ref: leds-class-multicolor.yaml#
60    properties:
61      reg:
62        minItems: 1
63        maxItems: 12
64        description:
65          This property denotes the LED module number(s) that is used on the
66          for the child node.  The LED modules can either be used stand alone
67          or grouped into a module bank.
68
69    patternProperties:
70      "(^led-[0-9a-f]$|led)":
71        type: object
72        $ref: common.yaml#
73
74required:
75  - compatible
76  - reg
77
78additionalProperties: false
79
80examples:
81  - |
82   #include <dt-bindings/gpio/gpio.h>
83   #include <dt-bindings/leds/common.h>
84
85   i2c {
86       #address-cells = <1>;
87       #size-cells = <0>;
88
89       led-controller@14 {
90           compatible = "ti,lp5009";
91           reg = <0x14>;
92           #address-cells = <1>;
93           #size-cells = <0>;
94           enable-gpios = <&gpio1 16>;
95
96           multi-led@1 {
97               #address-cells = <1>;
98               #size-cells = <0>;
99               reg = <0x1>;
100               color = <LED_COLOR_ID_RGB>;
101               function = LED_FUNCTION_CHARGING;
102
103               led-0 {
104                   color = <LED_COLOR_ID_RED>;
105               };
106
107               led-1 {
108                   color = <LED_COLOR_ID_GREEN>;
109               };
110
111               led-2 {
112                   color = <LED_COLOR_ID_BLUE>;
113               };
114          };
115
116          multi-led@2 {
117            #address-cells = <1>;
118            #size-cells = <2>;
119            reg = <0x2 0x3 0x5>;
120            color = <LED_COLOR_ID_RGB>;
121            function = LED_FUNCTION_STANDBY;
122
123            led-6 {
124              color = <LED_COLOR_ID_RED>;
125            };
126
127            led-7 {
128              color = <LED_COLOR_ID_GREEN>;
129            };
130
131            led-8 {
132              color = <LED_COLOR_ID_BLUE>;
133            };
134         };
135       };
136    };
137
138...
139