1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/media/i2c/ovti,ov772x.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Omnivision OV7720/OV7725 CMOS sensor 8 9maintainers: 10 - Jacopo Mondi <jacopo@jmondi.org> 11 12description: | 13 The Omnivision OV7720/OV7725 sensor supports multiple resolutions output, 14 such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can 15 support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats. 16 17properties: 18 compatible: 19 enum: 20 - ovti,ov7720 21 - ovti,ov7725 22 23 reg: 24 maxItems: 1 25 26 clocks: 27 maxItems: 1 28 29 reset-gpios: 30 description: | 31 Reference to the GPIO connected to the RSTB pin which is active low. 32 maxItems: 1 33 34 powerdown-gpios: 35 description: | 36 Reference to the GPIO connected to the PWDN pin which is active high. 37 maxItems: 1 38 39 port: 40 $ref: /schemas/graph.yaml#/$defs/port-base 41 description: | 42 Video output port. 43 44 properties: 45 endpoint: 46 $ref: /schemas/media/video-interfaces.yaml# 47 unevaluatedProperties: false 48 49 properties: 50 bus-type: 51 enum: [5, 6] 52 53 bus-width: 54 enum: [8, 10] 55 default: 10 56 57 data-shift: 58 enum: [0, 2] 59 default: 0 60 61 hsync-active: 62 enum: [0, 1] 63 default: 1 64 65 vsync-active: 66 enum: [0, 1] 67 default: 1 68 69 pclk-sample: 70 enum: [0, 1] 71 default: 1 72 73 allOf: 74 - if: 75 properties: 76 bus-type: 77 const: 6 78 then: 79 properties: 80 hsync-active: false 81 vsync-active: false 82 83 - if: 84 properties: 85 bus-width: 86 const: 10 87 then: 88 properties: 89 data-shift: 90 const: 0 91 92 required: 93 - bus-type 94 95 additionalProperties: false 96 97required: 98 - compatible 99 - reg 100 - clocks 101 - port 102 103additionalProperties: false 104 105examples: 106 - | 107 #include <dt-bindings/gpio/gpio.h> 108 109 i2c0 { 110 #address-cells = <1>; 111 #size-cells = <0>; 112 ov772x: camera@21 { 113 compatible = "ovti,ov7725"; 114 reg = <0x21>; 115 reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>; 116 powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>; 117 clocks = <&xclk>; 118 119 port { 120 ov772x_0: endpoint { 121 bus-type = <5>; 122 vsync-active = <0>; 123 hsync-active = <0>; 124 pclk-sample = <0>; 125 bus-width = <8>; 126 data-shift = <0>; 127 remote-endpoint = <&vcap1_in0>; 128 }; 129 }; 130 }; 131 }; 132 133... 134