1* Dialog DA9052/53 Power Management Integrated Circuit (PMIC)
2
3Required properties:
4- compatible : Should be "dlg,da9052", "dlg,da9053-aa",
5			 "dlg,da9053-ab", or "dlg,da9053-bb"
6
7Optional properties:
8- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen
9                    input lines are used as general purpose analogue
10					input.
11- tsiref-supply: Phandle to the regulator, which provides the reference
12                 voltage for the TSIREF pin. Must be provided when the
13			     touchscreen pins are used for ADC purposes.
14
15Sub-nodes:
16- regulators : Contain the regulator nodes. The DA9052/53 regulators are
17  bound using their names as listed below:
18
19    buck1     : regulator BUCK CORE
20    buck2     : regulator BUCK PRO
21    buck3     : regulator BUCK MEM
22    buck4     : regulator BUCK PERI
23    ldo1      : regulator LDO1
24    ldo2      : regulator LDO2
25    ldo3      : regulator LDO3
26    ldo4      : regulator LDO4
27    ldo5      : regulator LDO5
28    ldo6      : regulator LDO6
29    ldo7      : regulator LDO7
30    ldo8      : regulator LDO8
31    ldo9      : regulator LDO9
32    ldo10     : regulator LDO10
33
34  The bindings details of individual regulator device can be found in:
35  Documentation/devicetree/bindings/regulator/regulator.txt
36
37Examples:
38
39i2c@63fc8000 { /* I2C1 */
40
41	pmic: dialog@48 {
42		compatible = "dlg,da9053-aa";
43		reg = <0x48>;
44
45		regulators {
46			buck1 {
47				regulator-min-microvolt = <500000>;
48				regulator-max-microvolt = <2075000>;
49			};
50
51			buck2 {
52				regulator-min-microvolt = <500000>;
53				regulator-max-microvolt = <2075000>;
54			};
55
56			buck3 {
57				regulator-min-microvolt = <925000>;
58				regulator-max-microvolt = <2500000>;
59			};
60
61			buck4 {
62				regulator-min-microvolt = <925000>;
63				regulator-max-microvolt = <2500000>;
64			};
65		};
66	};
67};
68