1/* 2 * Device Tree Source for the Axis ARTPEC-6 SoC 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43#include <dt-bindings/interrupt-controller/arm-gic.h> 44#include <dt-bindings/dma/nbpfaxi.h> 45#include <dt-bindings/clock/axis,artpec6-clkctrl.h> 46 47/ { 48 #address-cells = <1>; 49 #size-cells = <1>; 50 compatible = "axis,artpec6"; 51 interrupt-parent = <&intc>; 52 53 cpus { 54 #address-cells = <1>; 55 #size-cells = <0>; 56 57 cpu0: cpu@0 { 58 device_type = "cpu"; 59 compatible = "arm,cortex-a9"; 60 reg = <0>; 61 next-level-cache = <&pl310>; 62 }; 63 64 cpu1: cpu@1 { 65 device_type = "cpu"; 66 compatible = "arm,cortex-a9"; 67 reg = <1>; 68 next-level-cache = <&pl310>; 69 }; 70 }; 71 72 syscon: syscon@f8000000 { 73 compatible = "axis,artpec6-syscon", "syscon"; 74 reg = <0xf8000000 0x48>; 75 }; 76 77 psci { 78 compatible = "arm,psci-0.2", "arm,psci"; 79 method = "smc"; 80 psci_version = <0x84000000>; 81 cpu_on = <0x84000003>; 82 system_reset = <0x84000009>; 83 }; 84 85 scu@faf00000 { 86 compatible = "arm,cortex-a9-scu"; 87 reg = <0xfaf00000 0x58>; 88 }; 89 90 /* Main external clock driving CPU and peripherals */ 91 ext_clk: ext_clk { 92 #clock-cells = <0>; 93 compatible = "fixed-clock"; 94 clock-frequency = <50000000>; 95 }; 96 97 eth_phy_ref_clk: eth_phy_ref_clk { 98 #clock-cells = <0>; 99 compatible = "fixed-clock"; 100 clock-frequency = <125000000>; 101 }; 102 103 clkctrl: clkctrl@f8000000 { 104 #clock-cells = <1>; 105 compatible = "axis,artpec6-clkctrl"; 106 reg = <0xf8000000 0x48>; 107 clocks = <&ext_clk>; 108 clock-names = "sys_refclk"; 109 }; 110 111 gtimer@faf00200 { 112 compatible = "arm,cortex-a9-global-timer"; 113 reg = <0xfaf00200 0x20>; 114 interrupts = <GIC_PPI 11 0xf01>; 115 clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>; 116 }; 117 118 timer@faf00600 { 119 compatible = "arm,cortex-a9-twd-timer"; 120 reg = <0xfaf00600 0x20>; 121 interrupts = <GIC_PPI 13 0xf04>; 122 clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>; 123 status = "disabled"; 124 }; 125 126 intc: interrupt-controller@faf01000 { 127 interrupt-controller; 128 compatible = "arm,cortex-a9-gic"; 129 #interrupt-cells = <3>; 130 reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >; 131 }; 132 133 pl310: cache-controller@faf10000 { 134 compatible = "arm,pl310-cache"; 135 cache-unified; 136 cache-level = <2>; 137 reg = <0xfaf10000 0x1000>; 138 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 139 arm,data-latency = <1 1 1>; 140 arm,tag-latency = <1 1 1>; 141 arm,filter-ranges = <0x0 0x80000000>; 142 arm,double-linefill = <1>; 143 arm,double-linefill-incr = <0>; 144 arm,double-linefill-wrap = <0>; 145 prefetch-data = <1>; 146 prefetch-instr = <1>; 147 arm,prefetch-offset = <0>; 148 arm,prefetch-drop = <1>; 149 }; 150 151 pmu { 152 compatible = "arm,cortex-a9-pmu"; 153 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, 154 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; 155 interrupt-affinity = <&cpu0>, <&cpu1>; 156 }; 157 158 /* 159 * Both pci nodes cannot be enabled at the same time, 160 * leave the unwanted node as disabled. 161 */ 162 pcie: pcie@f8050000 { 163 compatible = "axis,artpec6-pcie", "snps,dw-pcie"; 164 reg = <0xf8050000 0x2000 165 0xf8040000 0x1000 166 0xc0000000 0x2000>; 167 reg-names = "dbi", "phy", "config"; 168 #address-cells = <3>; 169 #size-cells = <2>; 170 device_type = "pci"; 171 /* downstream I/O */ 172 ranges = <0x81000000 0 0 0xc0002000 0 0x00010000 173 /* non-prefetchable memory */ 174 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; 175 num-lanes = <2>; 176 bus-range = <0x00 0xff>; 177 interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; 178 interrupt-names = "msi"; 179 #interrupt-cells = <1>; 180 interrupt-map-mask = <0 0 0 0x7>; 181 interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, 182 <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, 183 <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, 184 <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; 185 axis,syscon-pcie = <&syscon>; 186 status = "disabled"; 187 }; 188 189 pcie_ep: pcie_ep@f8050000 { 190 compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie"; 191 reg = <0xf8050000 0x2000 192 0xf8051000 0x2000 193 0xf8040000 0x1000 194 0xc0000000 0x20000000>; 195 reg-names = "dbi", "dbi2", "phy", "addr_space"; 196 num-ib-windows = <6>; 197 num-ob-windows = <2>; 198 num-lanes = <2>; 199 axis,syscon-pcie = <&syscon>; 200 status = "disabled"; 201 }; 202 203 pinctrl: pinctrl@f801d000 { 204 compatible = "axis,artpec6-pinctrl"; 205 reg = <0xf801d000 0x400>; 206 207 pinctrl_uart0: uart0grp { 208 function = "uart0"; 209 groups = "uart0grp2"; 210 bias-pull-up; 211 }; 212 pinctrl_uart1: uart1grp { 213 function = "uart1"; 214 groups = "uart1grp0"; 215 bias-pull-up; 216 }; 217 pinctrl_uart2: uart2grp { 218 function = "uart2"; 219 groups = "uart2grp1"; 220 bias-pull-up; 221 }; 222 pinctrl_uart3: uart3grp { 223 function = "uart3"; 224 groups = "uart3grp0"; 225 bias-pull-up; 226 }; 227 }; 228 229 amba@0 { 230 compatible = "simple-bus"; 231 #address-cells = <0x1>; 232 #size-cells = <0x1>; 233 ranges; 234 dma-ranges; 235 236 crypto@f4264000 { 237 compatible = "axis,artpec6-crypto"; 238 reg = <0xf4264000 0x4000>; 239 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; 240 }; 241 242 dma0: dma@f8019000 { 243 compatible = "renesas,nbpfaxi64dmac8b16"; 244 reg = <0xf8019000 0x400>; 245 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */ 246 <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, 247 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, 248 <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, 249 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, 250 <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 251 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, 252 <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, 253 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 254 interrupt-names = "error", 255 "ch0", "ch1", "ch2", "ch3", 256 "ch4", "ch5", "ch6", "ch7", 257 "ch8", "ch9", "ch10", "ch12", 258 "ch12", "ch13", "ch14", "ch15"; 259 clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>; 260 #dma-cells = <2>; 261 dma-channels = <8>; 262 dma-requests = <8>; 263 }; 264 dma1: dma@f8019400 { 265 compatible = "renesas,nbpfaxi64dmac8b16"; 266 reg = <0xf8019400 0x400>; 267 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */ 268 <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 269 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, 270 <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, 271 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, 272 <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, 273 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, 274 <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, 275 <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 276 interrupt-names = "error", 277 "ch0", "ch1", "ch2", "ch3", 278 "ch4", "ch5", "ch6", "ch7", 279 "ch8", "ch9", "ch10", "ch12", 280 "ch12", "ch13", "ch14", "ch15"; 281 clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>; 282 #dma-cells = <2>; 283 dma-channels = <8>; 284 dma-requests = <8>; 285 }; 286 287 ethernet: ethernet@f8010000 { 288 clock-names = "stmmaceth", "ptp_ref"; 289 clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>, 290 <&clkctrl ARTPEC6_CLK_PTP_REF>; 291 compatible = "snps,dwmac-4.10a", "snps,dwmac"; 292 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, 293 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 294 interrupt-names = "macirq", "eth_lpi"; 295 reg = <0xf8010000 0x4000>; 296 297 snps,axi-config = <&stmmac_axi_setup>; 298 snps,mtl-rx-config = <&mtl_rx_setup>; 299 snps,mtl-tx-config = <&mtl_tx_setup>; 300 301 snps,txpbl = <8>; 302 snps,rxpbl = <2>; 303 snps,aal; 304 snps,tso; 305 306 status = "disabled"; 307 308 stmmac_axi_setup: stmmac-axi-config { 309 snps,wr_osr_lmt = <1>; 310 snps,rd_osr_lmt = <15>; 311 /* If FB is disabled, the AXI master chooses 312 * a burst length of any value less than the 313 * maximum enabled burst length 314 * (all lesser burst length enables are redundant). 315 */ 316 snps,blen = <0 0 0 0 16 0 0>; 317 }; 318 319 mtl_rx_setup: rx-queues-config { 320 snps,rx-queues-to-use = <1>; 321 queue0 {}; 322 }; 323 324 mtl_tx_setup: tx-queues-config { 325 snps,tx-queues-to-use = <2>; 326 queue0 {}; 327 queue1 {}; 328 }; 329 }; 330 331 uart0: serial@f8036000 { 332 compatible = "arm,pl011", "arm,primecell"; 333 reg = <0xf8036000 0x1000>; 334 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 335 clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, 336 <&clkctrl ARTPEC6_CLK_UART_PCLK>; 337 clock-names = "uart_clk", "apb_pclk"; 338 pinctrl-names = "default"; 339 pinctrl-0 = <&pinctrl_uart0>; 340 dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, 341 <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; 342 dma-names = "rx", "tx"; 343 status = "disabled"; 344 }; 345 uart1: serial@f8037000 { 346 compatible = "arm,pl011", "arm,primecell"; 347 reg = <0xf8037000 0x1000>; 348 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; 349 clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, 350 <&clkctrl ARTPEC6_CLK_UART_PCLK>; 351 clock-names = "uart_clk", "apb_pclk"; 352 pinctrl-names = "default"; 353 pinctrl-0 = <&pinctrl_uart1>; 354 dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, 355 <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; 356 dma-names = "rx", "tx"; 357 status = "disabled"; 358 }; 359 uart2: serial@f8038000 { 360 compatible = "arm,pl011", "arm,primecell"; 361 reg = <0xf8038000 0x1000>; 362 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; 363 clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, 364 <&clkctrl ARTPEC6_CLK_UART_PCLK>; 365 clock-names = "uart_clk", "apb_pclk"; 366 pinctrl-names = "default"; 367 pinctrl-0 = <&pinctrl_uart2>; 368 dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, 369 <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; 370 dma-names = "rx", "tx"; 371 status = "disabled"; 372 }; 373 uart3: serial@f8039000 { 374 compatible = "arm,pl011", "arm,primecell"; 375 reg = <0xf8039000 0x1000>; 376 interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; 377 clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, 378 <&clkctrl ARTPEC6_CLK_UART_PCLK>; 379 clock-names = "uart_clk", "apb_pclk"; 380 pinctrl-names = "default"; 381 pinctrl-0 = <&pinctrl_uart3>; 382 dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, 383 <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; 384 dma-names = "rx", "tx"; 385 status = "disabled"; 386 }; 387 }; 388}; 389