1/*
2 * Copyright (C) 2013,2014 Russell King
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License
11 *     version 2 as published by the Free Software Foundation.
12 *
13 *     This file is distributed in the hope that it will be useful,
14 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
15 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16 *     GNU General Public License for more details.
17 *
18 * Or, alternatively,
19 *
20 *  b) Permission is hereby granted, free of charge, to any person
21 *     obtaining a copy of this software and associated documentation
22 *     files (the "Software"), to deal in the Software without
23 *     restriction, including without limitation the rights to use,
24 *     copy, modify, merge, publish, distribute, sublicense, and/or
25 *     sell copies of the Software, and to permit persons to whom the
26 *     Software is furnished to do so, subject to the following
27 *     conditions:
28 *
29 *     The above copyright notice and this permission notice shall be
30 *     included in all copies or substantial portions of the Software.
31 *
32 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
33 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
37 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 *     OTHER DEALINGS IN THE SOFTWARE.
40 */
41#include <dt-bindings/gpio/gpio.h>
42
43/ {
44	vcc_3v3: regulator-vcc-3v3 {
45		compatible = "regulator-fixed";
46		regulator-always-on;
47		regulator-name = "vcc_3v3";
48		regulator-min-microvolt = <3300000>;
49		regulator-max-microvolt = <3300000>;
50	};
51};
52
53&fec {
54	pinctrl-names = "default";
55	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
56	phy-mode = "rgmii-id";
57
58	/*
59	 * The PHY seems to require a long-enough reset duration to avoid
60	 * some rare issues where the PHY gets stuck in an inconsistent and
61	 * non-functional state at boot-up. 10ms proved to be fine .
62	 */
63	phy-reset-duration = <10>;
64	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
65	status = "okay";
66
67	mdio {
68		#address-cells = <1>;
69		#size-cells = <0>;
70
71		/*
72		 * The PHY can appear at either address 0 or 4 due to the
73		 * configuration (LED) pin not being pulled sufficiently.
74		 */
75		ethernet-phy@0 {
76			reg = <0>;
77			qca,clk-out-frequency = <125000000>;
78			qca,smarteee-tw-us-1g = <24>;
79		};
80
81		ethernet-phy@4 {
82			reg = <4>;
83			qca,clk-out-frequency = <125000000>;
84			qca,smarteee-tw-us-1g = <24>;
85		};
86	};
87};
88
89&iomuxc {
90	microsom {
91		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
92			fsl,pins = <
93				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
94				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
95				/* AR8035 reset */
96				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
97				/* AR8035 interrupt */
98				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
99				/* GPIO16 -> AR8035 25MHz */
100				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
101				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
102				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
103				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
104				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
105				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
106				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
107				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
108				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
109				/* AR8035 pin strapping: IO voltage: pull up */
110				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
111				/* AR8035 pin strapping: PHYADDR#0: pull down */
112				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
113				/* AR8035 pin strapping: PHYADDR#1: pull down */
114				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
115				/* AR8035 pin strapping: MODE#1: pull up */
116				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
117				/* AR8035 pin strapping: MODE#3: pull up */
118				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
119				/* AR8035 pin strapping: MODE#0: pull down */
120				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
121
122				/*
123				 * As the RMII pins are also connected to RGMII
124				 * so that an AR8030 can be placed, set these
125				 * to high-z with the same pulls as above.
126				 * Use the GPIO settings to avoid changing the
127				 * input select registers.
128				 */
129				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
130				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
131				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
132			>;
133		};
134
135		pinctrl_microsom_uart1: microsom-uart1 {
136			fsl,pins = <
137				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
138				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
139			>;
140		};
141	};
142};
143
144&uart1 {
145	pinctrl-names = "default";
146	pinctrl-0 = <&pinctrl_microsom_uart1>;
147	status = "okay";
148};
149