1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Common support for CompuLab CM-T3x CoMs 4 */ 5 6/ { 7 8 memory@80000000 { 9 device_type = "memory"; 10 reg = <0x80000000 0x10000000>; /* 256 MB */ 11 }; 12 13 leds { 14 compatible = "gpio-leds"; 15 pinctrl-names = "default"; 16 pinctrl-0 = <&green_led_pins>; 17 ledb { 18 label = "cm-t3x:green"; 19 gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */ 20 linux,default-trigger = "heartbeat"; 21 }; 22 }; 23 24 /* HS USB Port 1 Power */ 25 hsusb1_power: hsusb1_power_reg { 26 compatible = "regulator-fixed"; 27 regulator-name = "hsusb1_vbus"; 28 regulator-min-microvolt = <3300000>; 29 regulator-max-microvolt = <3300000>; 30 startup-delay-us = <70000>; 31 }; 32 33 /* HS USB Port 2 Power */ 34 hsusb2_power: hsusb2_power_reg { 35 compatible = "regulator-fixed"; 36 regulator-name = "hsusb2_vbus"; 37 regulator-min-microvolt = <3300000>; 38 regulator-max-microvolt = <3300000>; 39 startup-delay-us = <70000>; 40 }; 41 42 /* HS USB Host PHY on PORT 1 */ 43 hsusb1_phy: hsusb1_phy { 44 compatible = "usb-nop-xceiv"; 45 vcc-supply = <&hsusb1_power>; 46 #phy-cells = <0>; 47 }; 48 49 /* HS USB Host PHY on PORT 2 */ 50 hsusb2_phy: hsusb2_phy { 51 compatible = "usb-nop-xceiv"; 52 vcc-supply = <&hsusb2_power>; 53 #phy-cells = <0>; 54 }; 55 56 ads7846reg: ads7846-reg { 57 compatible = "regulator-fixed"; 58 regulator-name = "ads7846-reg"; 59 regulator-min-microvolt = <3300000>; 60 regulator-max-microvolt = <3300000>; 61 }; 62 63 tv0: svideo-connector { 64 compatible = "svideo-connector"; 65 label = "tv"; 66 67 port { 68 tv_connector_in: endpoint { 69 remote-endpoint = <&venc_out>; 70 }; 71 }; 72 }; 73}; 74 75&omap3_pmx_core { 76 77 uart3_pins: pinmux_uart3_pins { 78 pinctrl-single,pins = < 79 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ 80 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ 81 >; 82 }; 83 84 mmc1_pins: pinmux_mmc1_pins { 85 pinctrl-single,pins = < 86 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ 87 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ 88 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ 89 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 90 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 91 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ 92 >; 93 }; 94 95 green_led_pins: pinmux_green_led_pins { 96 pinctrl-single,pins = < 97 OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */ 98 >; 99 }; 100 101 dss_dpi_pins_common: pinmux_dss_dpi_pins_common { 102 pinctrl-single,pins = < 103 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ 104 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ 105 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ 106 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ 107 108 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ 109 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ 110 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ 111 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ 112 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ 113 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ 114 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ 115 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ 116 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ 117 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ 118 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ 119 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ 120 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ 121 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ 122 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ 123 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ 124 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ 125 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ 126 >; 127 }; 128 129 dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x { 130 pinctrl-single,pins = < 131 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ 132 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ 133 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ 134 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ 135 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ 136 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ 137 >; 138 }; 139 140 ads7846_pins: pinmux_ads7846_pins { 141 pinctrl-single,pins = < 142 OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ 143 >; 144 }; 145 146 mcspi1_pins: pinmux_mcspi1_pins { 147 pinctrl-single,pins = < 148 OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk */ 149 OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo */ 150 OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi */ 151 OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */ 152 >; 153 }; 154 155 i2c1_pins: pinmux_i2c1_pins { 156 pinctrl-single,pins = < 157 OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ 158 OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ 159 >; 160 }; 161 162 mcbsp2_pins: pinmux_mcbsp2_pins { 163 pinctrl-single,pins = < 164 OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */ 165 OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */ 166 OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */ 167 OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */ 168 >; 169 }; 170}; 171 172&uart3 { 173 pinctrl-names = "default"; 174 pinctrl-0 = <&uart3_pins>; 175}; 176 177&mmc1 { 178 pinctrl-names = "default"; 179 pinctrl-0 = <&mmc1_pins>; 180 bus-width = <4>; 181}; 182 183&mmc3 { 184 status = "disabled"; 185}; 186 187&i2c1 { 188 pinctrl-names = "default"; 189 pinctrl-0 = <&i2c1_pins>; 190 191 clock-frequency = <400000>; 192 193 at24@50 { 194 compatible = "atmel,24c02"; 195 pagesize = <16>; 196 reg = <0x50>; 197 }; 198}; 199 200&i2c3 { 201 clock-frequency = <400000>; 202}; 203 204&usbhshost { 205 port1-mode = "ehci-phy"; 206 port2-mode = "ehci-phy"; 207}; 208 209&usbhsehci { 210 phys = <&hsusb1_phy &hsusb2_phy>; 211}; 212 213&mcspi1 { 214 pinctrl-names = "default"; 215 pinctrl-0 = <&mcspi1_pins>; 216 217 /* touch controller */ 218 ads7846@0 { 219 pinctrl-names = "default"; 220 pinctrl-0 = <&ads7846_pins>; 221 222 compatible = "ti,ads7846"; 223 vcc-supply = <&ads7846reg>; 224 225 reg = <0>; /* CS0 */ 226 spi-max-frequency = <1500000>; 227 228 interrupt-parent = <&gpio2>; 229 interrupts = <25 0>; /* gpio_57 */ 230 pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; 231 232 ti,x-min = /bits/ 16 <0x0>; 233 ti,x-max = /bits/ 16 <0x0fff>; 234 ti,y-min = /bits/ 16 <0x0>; 235 ti,y-max = /bits/ 16 <0x0fff>; 236 237 ti,x-plate-ohms = /bits/ 16 <180>; 238 ti,pressure-max = /bits/ 16 <255>; 239 240 ti,debounce-max = /bits/ 16 <30>; 241 ti,debounce-tol = /bits/ 16 <10>; 242 ti,debounce-rep = /bits/ 16 <1>; 243 244 wakeup-source; 245 }; 246}; 247 248&venc { 249 status = "okay"; 250 251 port { 252 venc_out: endpoint { 253 remote-endpoint = <&tv_connector_in>; 254 ti,channels = <2>; 255 }; 256 }; 257}; 258 259&mcbsp2 { 260 status = "okay"; 261 262 pinctrl-names = "default"; 263 pinctrl-0 = <&mcbsp2_pins>; 264}; 265 266&gpmc { 267 ranges = <0 0 0x30000000 0x01000000>; /* CS0: 16MB for NAND */ 268 269 nand@0,0 { 270 compatible = "ti,omap2-nand"; 271 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ 272 interrupt-parent = <&gpmc>; 273 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ 274 <1 IRQ_TYPE_NONE>; /* termcount */ 275 nand-bus-width = <8>; 276 gpmc,device-width = <1>; 277 ti,nand-ecc-opt = "sw"; 278 279 gpmc,cs-on-ns = <0>; 280 gpmc,cs-rd-off-ns = <120>; 281 gpmc,cs-wr-off-ns = <120>; 282 283 gpmc,adv-on-ns = <0>; 284 gpmc,adv-rd-off-ns = <120>; 285 gpmc,adv-wr-off-ns = <120>; 286 287 gpmc,we-on-ns = <6>; 288 gpmc,we-off-ns = <90>; 289 290 gpmc,oe-on-ns = <6>; 291 gpmc,oe-off-ns = <90>; 292 293 gpmc,page-burst-access-ns = <6>; 294 gpmc,access-ns = <72>; 295 gpmc,cycle2cycle-delay-ns = <60>; 296 297 gpmc,rd-cycle-ns = <120>; 298 gpmc,wr-cycle-ns = <120>; 299 gpmc,wr-access-ns = <186>; 300 gpmc,wr-data-mux-bus-ns = <90>; 301 302 #address-cells = <1>; 303 #size-cells = <1>; 304 305 partition@0 { 306 label = "xloader"; 307 reg = <0 0x80000>; 308 }; 309 partition@80000 { 310 label = "uboot"; 311 reg = <0x80000 0x1e0000>; 312 }; 313 partition@260000 { 314 label = "uboot environment"; 315 reg = <0x260000 0x40000>; 316 }; 317 partition@2a0000 { 318 label = "linux"; 319 reg = <0x2a0000 0x400000>; 320 }; 321 partition@6a0000 { 322 label = "rootfs"; 323 reg = <0x6a0000 0x1f880000>; 324 }; 325 }; 326}; 327