1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com> 4 */ 5 6#include "omap36xx.dtsi" 7 8/ { 9 model = "INCOstartec LILLY-A83X module (DM3730)"; 10 compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; 11 12 chosen { 13 bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; 14 }; 15 16 memory@80000000 { 17 device_type = "memory"; 18 reg = <0x80000000 0x8000000>; /* 128 MB */ 19 }; 20 21 leds { 22 compatible = "gpio-leds"; 23 24 led1 { 25 label = "lilly-a83x::led1"; 26 gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; 27 linux,default-trigger = "default-on"; 28 }; 29 30 }; 31 32 sound { 33 compatible = "ti,omap-twl4030"; 34 ti,model = "lilly-a83x"; 35 36 ti,mcbsp = <&mcbsp2>; 37 }; 38 39 reg_vcc3: vcc3 { 40 compatible = "regulator-fixed"; 41 regulator-name = "VCC3"; 42 regulator-min-microvolt = <3300000>; 43 regulator-max-microvolt = <3300000>; 44 regulator-always-on; 45 }; 46 47 hsusb1_phy: hsusb1_phy { 48 compatible = "usb-nop-xceiv"; 49 vcc-supply = <®_vcc3>; 50 #phy-cells = <0>; 51 }; 52}; 53 54&omap3_pmx_wkup { 55 pinctrl-names = "default"; 56 57 lan9221_pins: pinmux_lan9221_pins { 58 pinctrl-single,pins = < 59 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ 60 >; 61 }; 62 63 tsc2048_pins: pinmux_tsc2048_pins { 64 pinctrl-single,pins = < 65 OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */ 66 >; 67 }; 68 69 mmc1cd_pins: pinmux_mmc1cd_pins { 70 pinctrl-single,pins = < 71 OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */ 72 >; 73 }; 74}; 75 76&omap3_pmx_core { 77 pinctrl-names = "default"; 78 79 uart1_pins: pinmux_uart1_pins { 80 pinctrl-single,pins = < 81 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ 82 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ 83 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ 84 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ 85 >; 86 }; 87 88 uart2_pins: pinmux_uart2_pins { 89 pinctrl-single,pins = < 90 OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */ 91 OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ 92 >; 93 }; 94 95 uart3_pins: pinmux_uart3_pins { 96 pinctrl-single,pins = < 97 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ 98 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ 99 >; 100 }; 101 102 i2c1_pins: pinmux_i2c1_pins { 103 pinctrl-single,pins = < 104 OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ 105 OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ 106 >; 107 }; 108 109 i2c2_pins: pinmux_i2c2_pins { 110 pinctrl-single,pins = < 111 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ 112 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ 113 >; 114 }; 115 116 i2c3_pins: pinmux_i2c3_pins { 117 pinctrl-single,pins = < 118 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ 119 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ 120 >; 121 }; 122 123 hsusb1_pins: pinmux_hsusb1_pins { 124 pinctrl-single,pins = < 125 126 /* GPIO 182 controls USB-Hub reset. But USB-Phy its 127 * reset can't be controlled. So we clamp this GPIO to 128 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub. 129 */ 130 131 OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ 132 >; 133 }; 134 135 hsusb_otg_pins: pinmux_hsusb_otg_pins { 136 pinctrl-single,pins = < 137 OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ 138 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ 139 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ 140 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ 141 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ 142 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ 143 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ 144 OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ 145 OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ 146 OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ 147 OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ 148 OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ 149 >; 150 }; 151 152 mmc1_pins: pinmux_mmc1_pins { 153 pinctrl-single,pins = < 154 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ 155 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ 156 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ 157 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 158 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 159 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ 160 >; 161 }; 162 163 spi2_pins: pinmux_spi2_pins { 164 pinctrl-single,pins = < 165 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */ 166 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */ 167 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */ 168 OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */ 169 >; 170 }; 171}; 172 173&omap3_pmx_core2 { 174 pinctrl-names = "default"; 175 176 hsusb1_2_pins: pinmux_hsusb1_2_pins { 177 pinctrl-single,pins = < 178 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ 179 OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ 180 OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ 181 OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ 182 OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ 183 OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ 184 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ 185 OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ 186 OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ 187 OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ 188 OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ 189 OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ 190 >; 191 }; 192 193 gpio1_pins: pinmux_gpio1_pins { 194 pinctrl-single,pins = < 195 OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */ 196 >; 197 }; 198 199}; 200 201&gpio1 { 202 pinctrl-names = "default"; 203 pinctrl-0 = <&gpio1_pins>; 204}; 205 206&gpio6 { 207 pinctrl-names = "default"; 208 pinctrl-0 = <&hsusb1_pins>; 209}; 210 211&i2c1 { 212 clock-frequency = <2600000>; 213 pinctrl-names = "default"; 214 pinctrl-0 = <&i2c1_pins>; 215 216 twl: twl@48 { 217 reg = <0x48>; 218 interrupts = <7>; /* SYS_NIRQ cascaded to intc */ 219 interrupt-parent = <&intc>; 220 221 twl_audio: audio { 222 compatible = "ti,twl4030-audio"; 223 codec { 224 }; 225 }; 226 }; 227}; 228 229#include "twl4030.dtsi" 230#include "twl4030_omap3.dtsi" 231 232&twl { 233 vmmc1: regulator-vmmc1 { 234 regulator-always-on; 235 }; 236 237 vdd1: regulator-vdd1 { 238 regulator-always-on; 239 }; 240 241 vdd2: regulator-vdd2 { 242 regulator-always-on; 243 }; 244}; 245 246&i2c2 { 247 clock-frequency = <2600000>; 248 pinctrl-names = "default"; 249 pinctrl-0 = <&i2c2_pins>; 250}; 251 252&i2c3 { 253 clock-frequency = <2600000>; 254 pinctrl-names = "default"; 255 pinctrl-0 = <&i2c3_pins>; 256 gpiom1: gpio@20 { 257 compatible = "microchip,mcp23017"; 258 gpio-controller; 259 #gpio-cells = <2>; 260 reg = <0x20>; 261 }; 262}; 263 264&uart1 { 265 pinctrl-names = "default"; 266 pinctrl-0 = <&uart1_pins>; 267}; 268 269&uart2 { 270 pinctrl-names = "default"; 271 pinctrl-0 = <&uart2_pins>; 272}; 273 274&uart3 { 275 pinctrl-names = "default"; 276 pinctrl-0 = <&uart3_pins>; 277}; 278 279&uart4 { 280 status = "disabled"; 281}; 282 283&mmc1 { 284 cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; 285 cd-inverted; 286 vmmc-supply = <&vmmc1>; 287 bus-width = <4>; 288 pinctrl-names = "default"; 289 pinctrl-0 = <&mmc1_pins &mmc1cd_pins>; 290 cap-sdio-irq; 291 cap-sd-highspeed; 292 cap-mmc-highspeed; 293}; 294 295&mmc2 { 296 status = "disabled"; 297}; 298 299&mmc3 { 300 status = "disabled"; 301}; 302 303&mcspi2 { 304 status = "okay"; 305 pinctrl-names = "default"; 306 pinctrl-0 = <&spi2_pins>; 307 308 tsc2046@0 { 309 reg = <0>; /* CS0 */ 310 compatible = "ti,tsc2046"; 311 interrupt-parent = <&gpio1>; 312 interrupts = <8 0>; /* boot6 / gpio_8 */ 313 spi-max-frequency = <1000000>; 314 pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; 315 vcc-supply = <®_vcc3>; 316 pinctrl-names = "default"; 317 pinctrl-0 = <&tsc2048_pins>; 318 319 ti,x-min = /bits/ 16 <300>; 320 ti,x-max = /bits/ 16 <3000>; 321 ti,y-min = /bits/ 16 <600>; 322 ti,y-max = /bits/ 16 <3600>; 323 ti,x-plate-ohms = /bits/ 16 <80>; 324 ti,pressure-max = /bits/ 16 <255>; 325 ti,swap-xy; 326 327 wakeup-source; 328 }; 329}; 330 331&usbhsehci { 332 phys = <&hsusb1_phy>; 333}; 334 335&usbhshost { 336 pinctrl-names = "default"; 337 pinctrl-0 = <&hsusb1_2_pins>; 338 num-ports = <2>; 339 port1-mode = "ehci-phy"; 340}; 341 342&usb_otg_hs { 343 pinctrl-names = "default"; 344 pinctrl-0 = <&hsusb_otg_pins>; 345 interface-type = <0>; 346 usb-phy = <&usb2_phy>; 347 phys = <&usb2_phy>; 348 phy-names = "usb2-phy"; 349 mode = <3>; 350 power = <50>; 351}; 352 353&mcbsp2 { 354 status = "okay"; 355}; 356 357&gpmc { 358 ranges = <0 0 0x30000000 0x1000000>, 359 <7 0 0x15000000 0x01000000>; 360 361 nand@0,0 { 362 compatible = "ti,omap2-nand"; 363 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ 364 interrupt-parent = <&gpmc>; 365 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ 366 <1 IRQ_TYPE_NONE>; /* termcount */ 367 nand-bus-width = <16>; 368 ti,nand-ecc-opt = "bch8"; 369 /* no elm on omap3 */ 370 371 gpmc,mux-add-data = <0>; 372 gpmc,device-width = <2>; 373 gpmc,wait-pin = <0>; 374 gpmc,wait-monitoring-ns = <0>; 375 gpmc,burst-length= <4>; 376 gpmc,cs-on-ns = <0>; 377 gpmc,cs-rd-off-ns = <100>; 378 gpmc,cs-wr-off-ns = <100>; 379 gpmc,adv-on-ns = <0>; 380 gpmc,adv-rd-off-ns = <100>; 381 gpmc,adv-wr-off-ns = <100>; 382 gpmc,oe-on-ns = <5>; 383 gpmc,oe-off-ns = <75>; 384 gpmc,we-on-ns = <5>; 385 gpmc,we-off-ns = <75>; 386 gpmc,rd-cycle-ns = <100>; 387 gpmc,wr-cycle-ns = <100>; 388 gpmc,access-ns = <60>; 389 gpmc,page-burst-access-ns = <5>; 390 gpmc,bus-turnaround-ns = <0>; 391 gpmc,cycle2cycle-samecsen; 392 gpmc,cycle2cycle-delay-ns = <50>; 393 gpmc,wr-data-mux-bus-ns = <75>; 394 gpmc,wr-access-ns = <155>; 395 396 #address-cells = <1>; 397 #size-cells = <1>; 398 399 partition@0 { 400 label = "MLO"; 401 reg = <0 0x80000>; 402 }; 403 404 partition@80000 { 405 label = "u-boot"; 406 reg = <0x80000 0x1e0000>; 407 }; 408 409 partition@260000 { 410 label = "u-boot-environment"; 411 reg = <0x260000 0x20000>; 412 }; 413 414 partition@280000 { 415 label = "kernel"; 416 reg = <0x280000 0x500000>; 417 }; 418 419 partition@780000 { 420 label = "filesystem"; 421 reg = <0x780000 0xf880000>; 422 }; 423 }; 424 425 ethernet@7,0 { 426 compatible = "smsc,lan9221", "smsc,lan9115"; 427 bank-width = <2>; 428 gpmc,mux-add-data = <2>; 429 gpmc,cs-on-ns = <10>; 430 gpmc,cs-rd-off-ns = <60>; 431 gpmc,cs-wr-off-ns = <60>; 432 gpmc,adv-on-ns = <0>; 433 gpmc,adv-rd-off-ns = <10>; 434 gpmc,adv-wr-off-ns = <10>; 435 gpmc,oe-on-ns = <10>; 436 gpmc,oe-off-ns = <60>; 437 gpmc,we-on-ns = <10>; 438 gpmc,we-off-ns = <60>; 439 gpmc,rd-cycle-ns = <100>; 440 gpmc,wr-cycle-ns = <100>; 441 gpmc,access-ns = <50>; 442 gpmc,page-burst-access-ns = <5>; 443 gpmc,bus-turnaround-ns = <0>; 444 gpmc,cycle2cycle-delay-ns = <75>; 445 gpmc,wr-data-mux-bus-ns = <15>; 446 gpmc,wr-access-ns = <75>; 447 gpmc,cycle2cycle-samecsen; 448 gpmc,cycle2cycle-diffcsen; 449 vddvario-supply = <®_vcc3>; 450 vdd33a-supply = <®_vcc3>; 451 reg-io-width = <4>; 452 interrupt-parent = <&gpio5>; 453 interrupts = <1 0x2>; 454 reg = <7 0 0xff>; 455 pinctrl-names = "default"; 456 pinctrl-0 = <&lan9221_pins>; 457 phy-mode = "mii"; 458 }; 459}; 460