1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Suppport for CompuLab SBC-T3517 with CM-T3517
4 */
5
6#include "omap3-cm-t3517.dts"
7#include "omap3-sb-t35.dtsi"
8
9/ {
10	model = "CompuLab SBC-T3517 with CM-T3517";
11	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
12
13	aliases {
14		display0 = &dvi0;
15		display1 = &tv0;
16	};
17
18	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
19	vddvario: regulator-vddvario-sb-t35 {
20		compatible = "regulator-fixed";
21		regulator-name = "vddvario";
22		regulator-always-on;
23	};
24
25	vdd33a: regulator-vdd33a-sb-t35 {
26		compatible = "regulator-fixed";
27		regulator-name = "vdd33a";
28		regulator-always-on;
29	};
30};
31
32&omap3_pmx_core {
33	pinctrl-names = "default";
34	pinctrl-0 = <
35			&sb_t35_usb_hub_pins
36			&usb_hub_pins
37		    >;
38
39	mmc1_aux_pins: pinmux_mmc1_aux_pins {
40		pinctrl-single,pins = <
41			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
42			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
43		>;
44	};
45
46	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
47		pinctrl-single,pins = <
48			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
49		>;
50	};
51};
52
53&mmc1 {
54	pinctrl-names = "default";
55	pinctrl-0 = <
56		&mmc1_pins
57		&mmc1_aux_pins
58	>;
59
60	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
61	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
62};
63
64&dss {
65	port {
66		dpi_out: endpoint {
67			remote-endpoint = <&tfp410_in>;
68			data-lines = <24>;
69		};
70	};
71};
72
73&gpmc {
74	ranges = <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
75		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
76};
77