1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (C) 2019 Bootlin
4 * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
5 */
6
7/dts-v1/;
8#include "sun8i-h3.dtsi"
9#include "sunxi-common-regulators.dtsi"
10
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/input/input.h>
13
14/ {
15	model = "RerVision H3-DVK";
16	compatible = "rervision,h3-dvk", "allwinner,sun8i-h3";
17
18	aliases {
19		ethernet0 = &emac;
20		serial0 = &uart0;
21	};
22
23	chosen {
24		stdout-path = "serial0:115200n8";
25	};
26
27	connector {
28		compatible = "hdmi-connector";
29		type = "a";
30
31		port {
32			hdmi_con_in: endpoint {
33				remote-endpoint = <&hdmi_out_con>;
34			};
35		};
36	};
37};
38
39&de {
40	status = "okay";
41};
42
43&ehci1 {
44	status = "okay";
45};
46
47&ehci2 {
48	status = "okay";
49};
50
51&ehci3 {
52	status = "okay";
53};
54
55&emac {
56	phy-handle = <&int_mii_phy>;
57	phy-mode = "mii";
58	allwinner,leds-active-low;
59	status = "okay";
60};
61
62&hdmi {
63	status = "okay";
64};
65
66&hdmi_out {
67	hdmi_out_con: endpoint {
68		remote-endpoint = <&hdmi_con_in>;
69	};
70};
71
72&mmc0 {
73	bus-width = <4>;
74	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
75	status = "okay";
76	vmmc-supply = <&reg_vcc3v3>;
77};
78
79&mmc2 {
80	pinctrl-names = "default";
81	pinctrl-0 = <&mmc2_8bit_pins>;
82	vmmc-supply = <&reg_vcc3v3>;
83	bus-width = <8>;
84	non-removable;
85	cap-mmc-hw-reset;
86	status = "okay";
87};
88
89&ohci1 {
90	status = "okay";
91};
92
93&ohci2 {
94	status = "okay";
95};
96
97&ohci3 {
98	status = "okay";
99};
100
101&uart0 {
102	pinctrl-names = "default";
103	pinctrl-0 = <&uart0_pa_pins>;
104	status = "okay";
105};
106
107&usb_otg {
108	status = "okay";
109	dr_mode = "peripheral";
110};
111
112&usbphy {
113	status = "okay";
114};
115