1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef __ASM_ARCH_REGS_LCD_H
3 #define __ASM_ARCH_REGS_LCD_H
4 
5 #include <mach/bitfield.h>
6 
7 /*
8  * LCD Controller Registers and Bits Definitions
9  */
10 #define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
11 #define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
12 #define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
13 #define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
14 #define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
15 #define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
16 #define LCSR		(0x038)	/* LCD Controller Status Register 0 */
17 #define LCSR1		(0x034)	/* LCD Controller Status Register 1 */
18 #define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
19 #define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
20 #define TMEDCR		(0x044)	/* TMED Control Register */
21 
22 #define FBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
23 #define FBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
24 #define FBR2		(0x028) /* DMA Channel 2 Frame Branch Register */
25 #define FBR3		(0x02C) /* DMA Channel 2 Frame Branch Register */
26 #define FBR4		(0x030) /* DMA Channel 2 Frame Branch Register */
27 #define FBR5		(0x110) /* DMA Channel 2 Frame Branch Register */
28 #define FBR6		(0x114) /* DMA Channel 2 Frame Branch Register */
29 
30 #define OVL1C1		(0x050)	/* Overlay 1 Control Register 1 */
31 #define OVL1C2		(0x060)	/* Overlay 1 Control Register 2 */
32 #define OVL2C1		(0x070)	/* Overlay 2 Control Register 1 */
33 #define OVL2C2		(0x080)	/* Overlay 2 Control Register 2 */
34 
35 #define CMDCR		(0x100)	/* Command Control Register */
36 #define PRSR		(0x104)	/* Panel Read Status Register */
37 
38 #define LCCR3_BPP(x)	((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
39 
40 #define LCCR3_PDFOR_0	(0 << 30)
41 #define LCCR3_PDFOR_1	(1 << 30)
42 #define LCCR3_PDFOR_2	(2 << 30)
43 #define LCCR3_PDFOR_3	(3 << 30)
44 
45 #define LCCR4_PAL_FOR_0	(0 << 15)
46 #define LCCR4_PAL_FOR_1	(1 << 15)
47 #define LCCR4_PAL_FOR_2	(2 << 15)
48 #define LCCR4_PAL_FOR_3	(3 << 15)
49 #define LCCR4_PAL_FOR_MASK	(3 << 15)
50 
51 #define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
52 #define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
53 #define FDADR2		(0x220)	/* DMA Channel 2 Frame Descriptor Address Register */
54 #define FDADR3		(0x230)	/* DMA Channel 3 Frame Descriptor Address Register */
55 #define FDADR4		(0x240)	/* DMA Channel 4 Frame Descriptor Address Register */
56 #define FDADR5		(0x250)	/* DMA Channel 5 Frame Descriptor Address Register */
57 #define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
58 
59 #define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
60 #define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
61 #define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
62 #define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
63 #define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
64 #define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
65 #define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
66 
67 #define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
68 #define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
69 #define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
70 #define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
71 #define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
72 #define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
73 #define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
74 #define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
75 #define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
76 #define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
77 #define LCCR0_DIS	(1 << 10)	/* LCD Disable */
78 #define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
79 #define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
80 #define LCCR0_PDD_S	12
81 #define LCCR0_BM	(1 << 20)	/* Branch mask */
82 #define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
83 #define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
84 #define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
85 #define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
86 #define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
87 #define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
88 
89 #define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
90 #define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
91 
92 #define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
93 #define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
94 
95 #define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
96 #define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
97 
98 #define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
99 #define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
100 
101 #define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
102 #define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
103 
104 #define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
105 #define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
106 
107 #define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
108 #define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
109 
110 #define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
111 #define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
112 
113 #define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
114 #define LCCR3_API_S	16
115 #define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
116 #define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
117 #define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
118 #define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
119 #define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
120 
121 #define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
122 #define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
123 #define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
124 
125 #define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
126 #define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
127 #define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
128 
129 #define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
130 #define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
131 
132 #define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
133 #define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
134 
135 #define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
136 #define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
137 
138 #define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
139 #define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
140 #define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
141 #define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
142 
143 #define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
144 #define LCSR_SOF	(1 << 1)	/* Start of frame */
145 #define LCSR_BER	(1 << 2)	/* Bus error */
146 #define LCSR_ABC	(1 << 3)	/* AC Bias count */
147 #define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
148 #define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
149 #define LCSR_OU		(1 << 6)	/* output FIFO underrun */
150 #define LCSR_QD		(1 << 7)	/* quick disable */
151 #define LCSR_EOF	(1 << 8)	/* end of frame */
152 #define LCSR_BS		(1 << 9)	/* branch status */
153 #define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
154 #define LCSR_RD_ST	(1 << 11)	/* read status */
155 #define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
156 
157 #define LCSR1_IU(x)	(1 << ((x) + 23)) /* Input FIFO underrun */
158 #define LCSR1_BS(x)	(1 << ((x) + 15)) /* Branch Status */
159 #define LCSR1_EOF(x)	(1 << ((x) + 7))  /* End of Frame Status */
160 #define LCSR1_SOF(x)	(1 << ((x) - 1))  /* Start of Frame Status */
161 
162 #define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
163 
164 /* overlay control registers */
165 #define OVLxC1_PPL(x)	((((x) - 1) & 0x3ff) << 0)	/* Pixels Per Line */
166 #define OVLxC1_LPO(x)	((((x) - 1) & 0x3ff) << 10)	/* Number of Lines */
167 #define OVLxC1_BPP(x)	(((x) & 0xf) << 20)	/* Bits Per Pixel */
168 #define OVLxC1_OEN	(1 << 31)		/* Enable bit for Overlay */
169 #define OVLxC2_XPOS(x)	(((x) & 0x3ff) << 0)	/* Horizontal Position */
170 #define OVLxC2_YPOS(x)	(((x) & 0x3ff) << 10)	/* Vertical Position */
171 #define OVL2C2_PFOR(x)	(((x) & 0x7) << 20)	/* Pixel Format */
172 
173 /* smartpanel related */
174 #define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
175 #define PRSR_A0		(1 << 8)	/* Read Data Source */
176 #define PRSR_ST_OK	(1 << 9)	/* Status OK */
177 #define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
178 
179 #define SMART_CMD_A0			 (0x1 << 8)
180 #define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
181 #define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
182 #define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
183 #define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
184 #define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
185 #define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
186 #define SMART_CMD_NOOP			 (0x4 << 9)
187 #define SMART_CMD_INTERRUPT		 (0x5 << 9)
188 
189 #define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
190 #define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
191 
192 /* SMART_DELAY() is introduced for software controlled delay primitive which
193  * can be inserted between command sequences, unused command 0x6 is used here
194  * and delay ranges from 0ms ~ 255ms
195  */
196 #define SMART_CMD_DELAY		(0x6 << 9)
197 #define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
198 #endif /* __ASM_ARCH_REGS_LCD_H */
199