1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/mach-pxa/lpd270.c
4 *
5 * Support for the LogicPD PXA270 Card Engine.
6 * Derived from the mainstone code, which carries these notices:
7 *
8 * Author: Nicolas Pitre
9 * Created: Nov 05, 2002
10 * Copyright: MontaVista Software Inc.
11 */
12 #include <linux/gpio.h>
13 #include <linux/init.h>
14 #include <linux/platform_device.h>
15 #include <linux/syscore_ops.h>
16 #include <linux/interrupt.h>
17 #include <linux/sched.h>
18 #include <linux/bitops.h>
19 #include <linux/fb.h>
20 #include <linux/ioport.h>
21 #include <linux/mtd/mtd.h>
22 #include <linux/mtd/partitions.h>
23 #include <linux/pwm.h>
24 #include <linux/pwm_backlight.h>
25 #include <linux/smc91x.h>
26
27 #include <asm/types.h>
28 #include <asm/setup.h>
29 #include <asm/memory.h>
30 #include <asm/mach-types.h>
31 #include <mach/hardware.h>
32 #include <asm/irq.h>
33 #include <linux/sizes.h>
34
35 #include <asm/mach/arch.h>
36 #include <asm/mach/map.h>
37 #include <asm/mach/irq.h>
38 #include <asm/mach/flash.h>
39
40 #include "pxa27x.h"
41 #include "lpd270.h"
42 #include <mach/audio.h>
43 #include <linux/platform_data/video-pxafb.h>
44 #include <linux/platform_data/mmc-pxamci.h>
45 #include <linux/platform_data/irda-pxaficp.h>
46 #include <linux/platform_data/usb-ohci-pxa27x.h>
47 #include <mach/smemc.h>
48
49 #include "generic.h"
50 #include "devices.h"
51
52 static unsigned long lpd270_pin_config[] __initdata = {
53 /* Chip Selects */
54 GPIO15_nCS_1, /* Mainboard Flash */
55 GPIO78_nCS_2, /* CPLD + Ethernet */
56
57 /* LCD - 16bpp Active TFT */
58 GPIO58_LCD_LDD_0,
59 GPIO59_LCD_LDD_1,
60 GPIO60_LCD_LDD_2,
61 GPIO61_LCD_LDD_3,
62 GPIO62_LCD_LDD_4,
63 GPIO63_LCD_LDD_5,
64 GPIO64_LCD_LDD_6,
65 GPIO65_LCD_LDD_7,
66 GPIO66_LCD_LDD_8,
67 GPIO67_LCD_LDD_9,
68 GPIO68_LCD_LDD_10,
69 GPIO69_LCD_LDD_11,
70 GPIO70_LCD_LDD_12,
71 GPIO71_LCD_LDD_13,
72 GPIO72_LCD_LDD_14,
73 GPIO73_LCD_LDD_15,
74 GPIO74_LCD_FCLK,
75 GPIO75_LCD_LCLK,
76 GPIO76_LCD_PCLK,
77 GPIO77_LCD_BIAS,
78 GPIO16_PWM0_OUT, /* Backlight */
79
80 /* USB Host */
81 GPIO88_USBH1_PWR,
82 GPIO89_USBH1_PEN,
83
84 /* AC97 */
85 GPIO28_AC97_BITCLK,
86 GPIO29_AC97_SDATA_IN_0,
87 GPIO30_AC97_SDATA_OUT,
88 GPIO31_AC97_SYNC,
89 GPIO45_AC97_SYSCLK,
90
91 GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
92 };
93
94 static unsigned int lpd270_irq_enabled;
95
lpd270_mask_irq(struct irq_data * d)96 static void lpd270_mask_irq(struct irq_data *d)
97 {
98 int lpd270_irq = d->irq - LPD270_IRQ(0);
99
100 __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
101
102 lpd270_irq_enabled &= ~(1 << lpd270_irq);
103 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
104 }
105
lpd270_unmask_irq(struct irq_data * d)106 static void lpd270_unmask_irq(struct irq_data *d)
107 {
108 int lpd270_irq = d->irq - LPD270_IRQ(0);
109
110 lpd270_irq_enabled |= 1 << lpd270_irq;
111 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
112 }
113
114 static struct irq_chip lpd270_irq_chip = {
115 .name = "CPLD",
116 .irq_ack = lpd270_mask_irq,
117 .irq_mask = lpd270_mask_irq,
118 .irq_unmask = lpd270_unmask_irq,
119 };
120
lpd270_irq_handler(struct irq_desc * desc)121 static void lpd270_irq_handler(struct irq_desc *desc)
122 {
123 unsigned int irq;
124 unsigned long pending;
125
126 pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
127 do {
128 /* clear useless edge notification */
129 desc->irq_data.chip->irq_ack(&desc->irq_data);
130 if (likely(pending)) {
131 irq = LPD270_IRQ(0) + __ffs(pending);
132 generic_handle_irq(irq);
133
134 pending = __raw_readw(LPD270_INT_STATUS) &
135 lpd270_irq_enabled;
136 }
137 } while (pending);
138 }
139
lpd270_init_irq(void)140 static void __init lpd270_init_irq(void)
141 {
142 int irq;
143
144 pxa27x_init_irq();
145
146 __raw_writew(0, LPD270_INT_MASK);
147 __raw_writew(0, LPD270_INT_STATUS);
148
149 /* setup extra LogicPD PXA270 irqs */
150 for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
151 irq_set_chip_and_handler(irq, &lpd270_irq_chip,
152 handle_level_irq);
153 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
154 }
155 irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
156 irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
157 }
158
159
160 #ifdef CONFIG_PM
lpd270_irq_resume(void)161 static void lpd270_irq_resume(void)
162 {
163 __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
164 }
165
166 static struct syscore_ops lpd270_irq_syscore_ops = {
167 .resume = lpd270_irq_resume,
168 };
169
lpd270_irq_device_init(void)170 static int __init lpd270_irq_device_init(void)
171 {
172 if (machine_is_logicpd_pxa270()) {
173 register_syscore_ops(&lpd270_irq_syscore_ops);
174 return 0;
175 }
176 return -ENODEV;
177 }
178
179 device_initcall(lpd270_irq_device_init);
180 #endif
181
182
183 static struct resource smc91x_resources[] = {
184 [0] = {
185 .start = LPD270_ETH_PHYS,
186 .end = (LPD270_ETH_PHYS + 0xfffff),
187 .flags = IORESOURCE_MEM,
188 },
189 [1] = {
190 .start = LPD270_ETHERNET_IRQ,
191 .end = LPD270_ETHERNET_IRQ,
192 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
193 },
194 };
195
196 struct smc91x_platdata smc91x_platdata = {
197 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
198 };
199
200 static struct platform_device smc91x_device = {
201 .name = "smc91x",
202 .id = 0,
203 .num_resources = ARRAY_SIZE(smc91x_resources),
204 .resource = smc91x_resources,
205 .dev.platform_data = &smc91x_platdata,
206 };
207
208 static struct resource lpd270_flash_resources[] = {
209 [0] = {
210 .start = PXA_CS0_PHYS,
211 .end = PXA_CS0_PHYS + SZ_64M - 1,
212 .flags = IORESOURCE_MEM,
213 },
214 [1] = {
215 .start = PXA_CS1_PHYS,
216 .end = PXA_CS1_PHYS + SZ_64M - 1,
217 .flags = IORESOURCE_MEM,
218 },
219 };
220
221 static struct mtd_partition lpd270_flash0_partitions[] = {
222 {
223 .name = "Bootloader",
224 .size = 0x00040000,
225 .offset = 0,
226 .mask_flags = MTD_WRITEABLE /* force read-only */
227 }, {
228 .name = "Kernel",
229 .size = 0x00400000,
230 .offset = 0x00040000,
231 }, {
232 .name = "Filesystem",
233 .size = MTDPART_SIZ_FULL,
234 .offset = 0x00440000
235 },
236 };
237
238 static struct flash_platform_data lpd270_flash_data[2] = {
239 {
240 .name = "processor-flash",
241 .map_name = "cfi_probe",
242 .parts = lpd270_flash0_partitions,
243 .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
244 }, {
245 .name = "mainboard-flash",
246 .map_name = "cfi_probe",
247 .parts = NULL,
248 .nr_parts = 0,
249 }
250 };
251
252 static struct platform_device lpd270_flash_device[2] = {
253 {
254 .name = "pxa2xx-flash",
255 .id = 0,
256 .dev = {
257 .platform_data = &lpd270_flash_data[0],
258 },
259 .resource = &lpd270_flash_resources[0],
260 .num_resources = 1,
261 }, {
262 .name = "pxa2xx-flash",
263 .id = 1,
264 .dev = {
265 .platform_data = &lpd270_flash_data[1],
266 },
267 .resource = &lpd270_flash_resources[1],
268 .num_resources = 1,
269 },
270 };
271
272 static struct pwm_lookup lpd270_pwm_lookup[] = {
273 PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
274 PWM_POLARITY_NORMAL),
275 };
276
277 static struct platform_pwm_backlight_data lpd270_backlight_data = {
278 .max_brightness = 1,
279 .dft_brightness = 1,
280 };
281
282 static struct platform_device lpd270_backlight_device = {
283 .name = "pwm-backlight",
284 .dev = {
285 .parent = &pxa27x_device_pwm0.dev,
286 .platform_data = &lpd270_backlight_data,
287 },
288 };
289
290 /* 5.7" TFT QVGA (LoLo display number 1) */
291 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
292 .pixclock = 150000,
293 .xres = 320,
294 .yres = 240,
295 .bpp = 16,
296 .hsync_len = 0x14,
297 .left_margin = 0x28,
298 .right_margin = 0x0a,
299 .vsync_len = 0x02,
300 .upper_margin = 0x08,
301 .lower_margin = 0x14,
302 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
303 };
304
305 static struct pxafb_mach_info sharp_lq057q3dc02 = {
306 .modes = &sharp_lq057q3dc02_mode,
307 .num_modes = 1,
308 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
309 LCD_ALTERNATE_MAPPING,
310 };
311
312 /* 12.1" TFT SVGA (LoLo display number 2) */
313 static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
314 .pixclock = 50000,
315 .xres = 800,
316 .yres = 600,
317 .bpp = 16,
318 .hsync_len = 0x05,
319 .left_margin = 0x52,
320 .right_margin = 0x05,
321 .vsync_len = 0x04,
322 .upper_margin = 0x14,
323 .lower_margin = 0x0a,
324 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
325 };
326
327 static struct pxafb_mach_info sharp_lq121s1dg31 = {
328 .modes = &sharp_lq121s1dg31_mode,
329 .num_modes = 1,
330 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
331 LCD_ALTERNATE_MAPPING,
332 };
333
334 /* 3.6" TFT QVGA (LoLo display number 3) */
335 static struct pxafb_mode_info sharp_lq036q1da01_mode = {
336 .pixclock = 150000,
337 .xres = 320,
338 .yres = 240,
339 .bpp = 16,
340 .hsync_len = 0x0e,
341 .left_margin = 0x04,
342 .right_margin = 0x0a,
343 .vsync_len = 0x03,
344 .upper_margin = 0x03,
345 .lower_margin = 0x03,
346 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
347 };
348
349 static struct pxafb_mach_info sharp_lq036q1da01 = {
350 .modes = &sharp_lq036q1da01_mode,
351 .num_modes = 1,
352 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
353 LCD_ALTERNATE_MAPPING,
354 };
355
356 /* 6.4" TFT VGA (LoLo display number 5) */
357 static struct pxafb_mode_info sharp_lq64d343_mode = {
358 .pixclock = 25000,
359 .xres = 640,
360 .yres = 480,
361 .bpp = 16,
362 .hsync_len = 0x31,
363 .left_margin = 0x89,
364 .right_margin = 0x19,
365 .vsync_len = 0x12,
366 .upper_margin = 0x22,
367 .lower_margin = 0x00,
368 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
369 };
370
371 static struct pxafb_mach_info sharp_lq64d343 = {
372 .modes = &sharp_lq64d343_mode,
373 .num_modes = 1,
374 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
375 LCD_ALTERNATE_MAPPING,
376 };
377
378 /* 10.4" TFT VGA (LoLo display number 7) */
379 static struct pxafb_mode_info sharp_lq10d368_mode = {
380 .pixclock = 25000,
381 .xres = 640,
382 .yres = 480,
383 .bpp = 16,
384 .hsync_len = 0x31,
385 .left_margin = 0x89,
386 .right_margin = 0x19,
387 .vsync_len = 0x12,
388 .upper_margin = 0x22,
389 .lower_margin = 0x00,
390 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
391 };
392
393 static struct pxafb_mach_info sharp_lq10d368 = {
394 .modes = &sharp_lq10d368_mode,
395 .num_modes = 1,
396 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
397 LCD_ALTERNATE_MAPPING,
398 };
399
400 /* 3.5" TFT QVGA (LoLo display number 8) */
401 static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
402 .pixclock = 150000,
403 .xres = 240,
404 .yres = 320,
405 .bpp = 16,
406 .hsync_len = 0x0e,
407 .left_margin = 0x0a,
408 .right_margin = 0x0a,
409 .vsync_len = 0x03,
410 .upper_margin = 0x05,
411 .lower_margin = 0x14,
412 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
413 };
414
415 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
416 .modes = &sharp_lq035q7db02_20_mode,
417 .num_modes = 1,
418 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
419 LCD_ALTERNATE_MAPPING,
420 };
421
422 static struct pxafb_mach_info *lpd270_lcd_to_use;
423
lpd270_set_lcd(char * str)424 static int __init lpd270_set_lcd(char *str)
425 {
426 if (!strncasecmp(str, "lq057q3dc02", 11)) {
427 lpd270_lcd_to_use = &sharp_lq057q3dc02;
428 } else if (!strncasecmp(str, "lq121s1dg31", 11)) {
429 lpd270_lcd_to_use = &sharp_lq121s1dg31;
430 } else if (!strncasecmp(str, "lq036q1da01", 11)) {
431 lpd270_lcd_to_use = &sharp_lq036q1da01;
432 } else if (!strncasecmp(str, "lq64d343", 8)) {
433 lpd270_lcd_to_use = &sharp_lq64d343;
434 } else if (!strncasecmp(str, "lq10d368", 8)) {
435 lpd270_lcd_to_use = &sharp_lq10d368;
436 } else if (!strncasecmp(str, "lq035q7db02-20", 14)) {
437 lpd270_lcd_to_use = &sharp_lq035q7db02_20;
438 } else {
439 printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
440 }
441
442 return 1;
443 }
444
445 __setup("lcd=", lpd270_set_lcd);
446
447 static struct platform_device *platform_devices[] __initdata = {
448 &smc91x_device,
449 &lpd270_backlight_device,
450 &lpd270_flash_device[0],
451 &lpd270_flash_device[1],
452 };
453
454 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
455 .port_mode = PMM_PERPORT_MODE,
456 .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
457 };
458
lpd270_init(void)459 static void __init lpd270_init(void)
460 {
461 pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
462
463 pxa_set_ffuart_info(NULL);
464 pxa_set_btuart_info(NULL);
465 pxa_set_stuart_info(NULL);
466
467 lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
468 lpd270_flash_data[1].width = 4;
469
470 /*
471 * System bus arbiter setting:
472 * - Core_Park
473 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
474 */
475 ARB_CNTRL = ARB_CORE_PARK | 0x234;
476
477 pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
478 platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
479
480 pxa_set_ac97_info(NULL);
481
482 if (lpd270_lcd_to_use != NULL)
483 pxa_set_fb_info(NULL, lpd270_lcd_to_use);
484
485 pxa_set_ohci_info(&lpd270_ohci_platform_data);
486 }
487
488
489 static struct map_desc lpd270_io_desc[] __initdata = {
490 {
491 .virtual = (unsigned long)LPD270_CPLD_VIRT,
492 .pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
493 .length = LPD270_CPLD_SIZE,
494 .type = MT_DEVICE,
495 },
496 };
497
lpd270_map_io(void)498 static void __init lpd270_map_io(void)
499 {
500 pxa27x_map_io();
501 iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
502
503 /* for use I SRAM as framebuffer. */
504 PSLR |= 0x00000F04;
505 PCFR = 0x00000066;
506 }
507
508 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
509 /* Maintainer: Peter Barada */
510 .atag_offset = 0x100,
511 .map_io = lpd270_map_io,
512 .nr_irqs = LPD270_NR_IRQS,
513 .init_irq = lpd270_init_irq,
514 .handle_irq = pxa27x_handle_irq,
515 .init_time = pxa_timer_init,
516 .init_machine = lpd270_init,
517 .restart = pxa_restart,
518 MACHINE_END
519