1# SPDX-License-Identifier: GPL-2.0-only
2if ARCH_SA1100
3
4menu "SA11x0 Implementations"
5
6config SA1100_ASSABET
7	bool "Assabet"
8	select ARM_SA1110_CPUFREQ
9	select GPIO_REG
10	select LEDS_GPIO_REGISTER
11	select REGULATOR
12	select REGULATOR_FIXED_VOLTAGE
13	help
14	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
15	  Microprocessor Development Board (also known as the Assabet).
16
17config ASSABET_NEPONSET
18	bool "Include support for Neponset"
19	depends on SA1100_ASSABET
20	select SA1111
21	help
22	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
23	  Microprocessor Development Board (Assabet)  with the SA-1111
24	  Development Board (Nepon).
25
26config SA1100_CERF
27	bool "CerfBoard"
28	select ARM_SA1110_CPUFREQ
29	select LEDS_GPIO_REGISTER
30	help
31	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
32	  More information is available at:
33	  <http://www.intrinsyc.com/products/cerfboard/>.
34
35	  Say Y if configuring for an Intrinsyc CerfBoard.
36	  Say N otherwise.
37
38choice
39	prompt "Cerf Flash available"
40	depends on SA1100_CERF
41	default SA1100_CERF_FLASH_8MB
42
43config SA1100_CERF_FLASH_8MB
44	bool "8MB"
45
46config SA1100_CERF_FLASH_16MB
47	bool "16MB"
48
49config SA1100_CERF_FLASH_32MB
50	bool "32MB"
51
52endchoice
53
54config SA1100_COLLIE
55	bool "Sharp Zaurus SL5500"
56	# FIXME: select ARM_SA11x0_CPUFREQ
57	select SHARP_LOCOMO
58	select SHARP_PARAM
59	select SHARP_SCOOP
60	help
61	  Say Y here to support the Sharp Zaurus SL5500 PDAs.
62
63config SA1100_H3100
64	bool "Compaq iPAQ H3100"
65	select ARM_SA1110_CPUFREQ
66	select HTC_EGPIO
67	select MFD_IPAQ_MICRO
68	help
69	  Say Y here if you intend to run this kernel on the Compaq iPAQ
70	  H3100 handheld computer.
71
72config SA1100_H3600
73	bool "Compaq iPAQ H3600/H3700"
74	select ARM_SA1110_CPUFREQ
75	select HTC_EGPIO
76	select MFD_IPAQ_MICRO
77	help
78	  Say Y here if you intend to run this kernel on the Compaq iPAQ
79	  H3600 and H3700 handheld computers.
80
81config SA1100_BADGE4
82	bool "HP Labs BadgePAD 4"
83	select ARM_SA1100_CPUFREQ
84	select SA1111
85	help
86	  Say Y here if you want to build a kernel for the HP Laboratories
87	  BadgePAD 4.
88
89config SA1100_JORNADA720
90	bool "HP Jornada 720"
91	# FIXME: select ARM_SA11x0_CPUFREQ
92	select SA1111
93	help
94	  Say Y here if you want to build a kernel for the HP Jornada 720
95	  handheld computer.  See
96	  <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
97
98config SA1100_JORNADA720_SSP
99	bool "HP Jornada 720 Extended SSP driver"
100	depends on SA1100_JORNADA720
101	select SA1100_SSP
102	help
103	  Say Y here if you have a HP Jornada 7xx handheld computer and you
104	  want to access devices connected to the MCU. Those include the
105	  keyboard, touchscreen, backlight and battery. This driver also activates
106	  the generic SSP which it extends.
107
108config SA1100_HACKKIT
109	bool "HackKit Core CPU Board"
110	select ARM_SA1100_CPUFREQ
111	help
112	  Say Y here to support the HackKit Core CPU Board
113	  <http://hackkit.eletztrick.de>;
114
115config SA1100_LART
116	bool "LART"
117	select ARM_SA1100_CPUFREQ
118	help
119	  Say Y here if you are using the Linux Advanced Radio Terminal
120	  (also known as the LART).  See <http://www.lartmaker.nl/> for
121	  information on the LART.
122
123config SA1100_NANOENGINE
124	bool "nanoEngine"
125	select ARM_SA1110_CPUFREQ
126	select FORCE_PCI
127	select PCI_NANOENGINE
128	help
129	  Say Y here if you are using the Bright Star Engineering nanoEngine.
130	  See <http://www.brightstareng.com/arm/nanoeng.htm> for information
131	  on the BSE nanoEngine.
132
133config SA1100_PLEB
134	bool "PLEB"
135	select ARM_SA1100_CPUFREQ
136	help
137	  Say Y here if you are using version 1 of the Portable Linux
138	  Embedded Board (also known as PLEB).
139	  See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
140	  for more information.
141
142config SA1100_SHANNON
143	bool "Shannon"
144	select ARM_SA1100_CPUFREQ
145	select REGULATOR
146	select REGULATOR_FIXED_VOLTAGE
147	help
148	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
149	  limited edition webphone produced by Philips. The Shannon is a SA1100
150	  platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
151	  and a telco interface.
152
153config SA1100_SIMPAD
154	bool "Simpad"
155	select ARM_SA1110_CPUFREQ
156	help
157	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
158	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
159	  FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
160	  PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
161	  like CL4 in additional it has a PCMCIA-Slot. For more information
162	  visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
163
164config SA1100_SSP
165	tristate "Generic PIO SSP"
166	help
167	  Say Y here to enable support for the generic PIO SSP driver.
168	  This isn't for audio support, but for attached sensors and
169	  other devices, eg for BadgePAD 4 sensor support.
170
171endmenu
172
173endif
174
175