1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/clock/ingenic,tcu.h>
3#include <dt-bindings/clock/ingenic,x1000-cgu.h>
4#include <dt-bindings/dma/x1000-dma.h>
5
6/ {
7	#address-cells = <1>;
8	#size-cells = <1>;
9	compatible = "ingenic,x1000", "ingenic,x1000e";
10
11	cpus {
12		#address-cells = <1>;
13		#size-cells = <0>;
14
15		cpu0: cpu@0 {
16			device_type = "cpu";
17			compatible = "ingenic,xburst-fpu1.0-mxu1.1";
18			reg = <0>;
19
20			clocks = <&cgu X1000_CLK_CPU>;
21			clock-names = "cpu";
22		};
23	};
24
25	cpuintc: interrupt-controller {
26		#address-cells = <0>;
27		#interrupt-cells = <1>;
28		interrupt-controller;
29		compatible = "mti,cpu-interrupt-controller";
30	};
31
32	intc: interrupt-controller@10001000 {
33		compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
34		reg = <0x10001000 0x50>;
35
36		interrupt-controller;
37		#interrupt-cells = <1>;
38
39		interrupt-parent = <&cpuintc>;
40		interrupts = <2>;
41	};
42
43	exclk: ext {
44		compatible = "fixed-clock";
45		#clock-cells = <0>;
46	};
47
48	rtclk: rtc {
49		compatible = "fixed-clock";
50		#clock-cells = <0>;
51		clock-frequency = <32768>;
52	};
53
54	cgu: x1000-cgu@10000000 {
55		compatible = "ingenic,x1000-cgu", "simple-mfd";
56		reg = <0x10000000 0x100>;
57		#address-cells = <1>;
58		#size-cells = <1>;
59		ranges = <0x0 0x10000000 0x100>;
60
61		#clock-cells = <1>;
62
63		clocks = <&exclk>, <&rtclk>;
64		clock-names = "ext", "rtc";
65
66		otg_phy: usb-phy@3c {
67			compatible = "ingenic,x1000-phy";
68			reg = <0x3c 0x10>;
69
70			clocks = <&cgu X1000_CLK_OTGPHY>;
71
72			#phy-cells = <0>;
73
74			status = "disabled";
75		};
76
77		rng: rng@d8 {
78			compatible = "ingenic,x1000-rng";
79			reg = <0xd8 0x8>;
80
81			status = "disabled";
82		};
83
84		mac_phy_ctrl: mac-phy-ctrl@e8 {
85			compatible = "syscon";
86			reg = <0xe8 0x4>;
87		};
88	};
89
90	ost: timer@12000000 {
91		compatible = "ingenic,x1000-ost";
92		reg = <0x12000000 0x3c>;
93
94		#clock-cells = <1>;
95
96		clocks = <&cgu X1000_CLK_OST>;
97		clock-names = "ost";
98
99		interrupt-parent = <&cpuintc>;
100		interrupts = <3>;
101	};
102
103	tcu: timer@10002000 {
104		compatible = "ingenic,x1000-tcu", "simple-mfd";
105		reg = <0x10002000 0x1000>;
106		#address-cells = <1>;
107		#size-cells = <1>;
108		ranges = <0x0 0x10002000 0x1000>;
109
110		#clock-cells = <1>;
111
112		clocks = <&cgu X1000_CLK_RTCLK>,
113			 <&cgu X1000_CLK_EXCLK>,
114			 <&cgu X1000_CLK_PCLK>;
115		clock-names = "rtc", "ext", "pclk";
116
117		interrupt-controller;
118		#interrupt-cells = <1>;
119
120		interrupt-parent = <&intc>;
121		interrupts = <27 26 25>;
122
123		wdt: watchdog@0 {
124			compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
125			reg = <0x0 0x10>;
126
127			clocks = <&tcu TCU_CLK_WDT>;
128			clock-names = "wdt";
129		};
130	};
131
132	rtc: rtc@10003000 {
133		compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
134		reg = <0x10003000 0x4c>;
135
136		interrupt-parent = <&intc>;
137		interrupts = <32>;
138
139		clocks = <&cgu X1000_CLK_RTCLK>;
140		clock-names = "rtc";
141	};
142
143	pinctrl: pin-controller@10010000 {
144		compatible = "ingenic,x1000-pinctrl";
145		reg = <0x10010000 0x800>;
146		#address-cells = <1>;
147		#size-cells = <0>;
148
149		gpa: gpio@0 {
150			compatible = "ingenic,x1000-gpio";
151			reg = <0>;
152
153			gpio-controller;
154			gpio-ranges = <&pinctrl 0 0 32>;
155			#gpio-cells = <2>;
156
157			interrupt-controller;
158			#interrupt-cells = <2>;
159
160			interrupt-parent = <&intc>;
161			interrupts = <17>;
162		};
163
164		gpb: gpio@1 {
165			compatible = "ingenic,x1000-gpio";
166			reg = <1>;
167
168			gpio-controller;
169			gpio-ranges = <&pinctrl 0 32 32>;
170			#gpio-cells = <2>;
171
172			interrupt-controller;
173			#interrupt-cells = <2>;
174
175			interrupt-parent = <&intc>;
176			interrupts = <16>;
177		};
178
179		gpc: gpio@2 {
180			compatible = "ingenic,x1000-gpio";
181			reg = <2>;
182
183			gpio-controller;
184			gpio-ranges = <&pinctrl 0 64 32>;
185			#gpio-cells = <2>;
186
187			interrupt-controller;
188			#interrupt-cells = <2>;
189
190			interrupt-parent = <&intc>;
191			interrupts = <15>;
192		};
193
194		gpd: gpio@3 {
195			compatible = "ingenic,x1000-gpio";
196			reg = <3>;
197
198			gpio-controller;
199			gpio-ranges = <&pinctrl 0 96 32>;
200			#gpio-cells = <2>;
201
202			interrupt-controller;
203			#interrupt-cells = <2>;
204
205			interrupt-parent = <&intc>;
206			interrupts = <14>;
207		};
208	};
209
210	uart0: serial@10030000 {
211		compatible = "ingenic,x1000-uart";
212		reg = <0x10030000 0x100>;
213
214		interrupt-parent = <&intc>;
215		interrupts = <51>;
216
217		clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
218		clock-names = "baud", "module";
219
220		status = "disabled";
221	};
222
223	uart1: serial@10031000 {
224		compatible = "ingenic,x1000-uart";
225		reg = <0x10031000 0x100>;
226
227		interrupt-parent = <&intc>;
228		interrupts = <50>;
229
230		clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
231		clock-names = "baud", "module";
232
233		status = "disabled";
234	};
235
236	uart2: serial@10032000 {
237		compatible = "ingenic,x1000-uart";
238		reg = <0x10032000 0x100>;
239
240		interrupt-parent = <&intc>;
241		interrupts = <49>;
242
243		clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
244		clock-names = "baud", "module";
245
246		status = "disabled";
247	};
248
249	i2c0: i2c-controller@10050000 {
250		compatible = "ingenic,x1000-i2c";
251		reg = <0x10050000 0x1000>;
252		#address-cells = <1>;
253		#size-cells = <0>;
254
255		interrupt-parent = <&intc>;
256		interrupts = <60>;
257
258		clocks = <&cgu X1000_CLK_I2C0>;
259
260		status = "disabled";
261	};
262
263	i2c1: i2c-controller@10051000 {
264		compatible = "ingenic,x1000-i2c";
265		reg = <0x10051000 0x1000>;
266		#address-cells = <1>;
267		#size-cells = <0>;
268
269		interrupt-parent = <&intc>;
270		interrupts = <59>;
271
272		clocks = <&cgu X1000_CLK_I2C1>;
273
274		status = "disabled";
275	};
276
277	i2c2: i2c-controller@10052000 {
278		compatible = "ingenic,x1000-i2c";
279		reg = <0x10052000 0x1000>;
280		#address-cells = <1>;
281		#size-cells = <0>;
282
283		interrupt-parent = <&intc>;
284		interrupts = <58>;
285
286		clocks = <&cgu X1000_CLK_I2C2>;
287
288		status = "disabled";
289	};
290
291	pdma: dma-controller@13420000 {
292		compatible = "ingenic,x1000-dma";
293		reg = <0x13420000 0x400>, <0x13421000 0x40>;
294		#dma-cells = <2>;
295
296		interrupt-parent = <&intc>;
297		interrupts = <10>;
298
299		clocks = <&cgu X1000_CLK_PDMA>;
300	};
301
302	msc0: mmc@13450000 {
303		compatible = "ingenic,x1000-mmc";
304		reg = <0x13450000 0x1000>;
305
306		interrupt-parent = <&intc>;
307		interrupts = <37>;
308
309		clocks = <&cgu X1000_CLK_MSC0>;
310		clock-names = "mmc";
311
312		cap-sd-highspeed;
313		cap-mmc-highspeed;
314		cap-sdio-irq;
315
316		dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
317			   <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
318		dma-names = "rx", "tx";
319
320		status = "disabled";
321	};
322
323	msc1: mmc@13460000 {
324		compatible = "ingenic,x1000-mmc";
325		reg = <0x13460000 0x1000>;
326
327		interrupt-parent = <&intc>;
328		interrupts = <36>;
329
330		clocks = <&cgu X1000_CLK_MSC1>;
331		clock-names = "mmc";
332
333		cap-sd-highspeed;
334		cap-mmc-highspeed;
335		cap-sdio-irq;
336
337		dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
338			   <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
339		dma-names = "rx", "tx";
340
341		status = "disabled";
342	};
343
344	mac: ethernet@134b0000 {
345		compatible = "ingenic,x1000-mac", "snps,dwmac";
346		reg = <0x134b0000 0x2000>;
347
348		interrupt-parent = <&intc>;
349		interrupts = <55>;
350		interrupt-names = "macirq";
351
352		clocks = <&cgu X1000_CLK_MAC>;
353		clock-names = "stmmaceth";
354
355		mode-reg = <&mac_phy_ctrl>;
356
357		status = "disabled";
358
359		mdio: mdio {
360			compatible = "snps,dwmac-mdio";
361			#address-cells = <1>;
362			#size-cells = <0>;
363
364			status = "disabled";
365		};
366	};
367
368	otg: usb@13500000 {
369		compatible = "ingenic,x1000-otg", "snps,dwc2";
370		reg = <0x13500000 0x40000>;
371
372		interrupt-parent = <&intc>;
373		interrupts = <21>;
374
375		clocks = <&cgu X1000_CLK_OTG>;
376		clock-names = "otg";
377
378		phys = <&otg_phy>;
379		phy-names = "usb2-phy";
380
381		g-rx-fifo-size = <768>;
382		g-np-tx-fifo-size = <256>;
383		g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
384
385		status = "disabled";
386	};
387};
388