1 /*
2 * Setup pointers to hardware dependent routines.
3 *
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
7 *
8 * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
9 * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
10 *
11 */
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/io.h>
15 #include <linux/ioport.h>
16 #include <linux/memblock.h>
17 #include <linux/pm.h>
18
19 #include <asm/bootinfo.h>
20 #include <asm/reboot.h>
21 #include <asm/setup.h>
22 #include <asm/gt64120.h>
23
24 #include <cobalt.h>
25
26 extern void cobalt_machine_restart(char *command);
27 extern void cobalt_machine_halt(void);
28
get_system_type(void)29 const char *get_system_type(void)
30 {
31 switch (cobalt_board_id) {
32 case COBALT_BRD_ID_QUBE1:
33 return "Cobalt Qube";
34 case COBALT_BRD_ID_RAQ1:
35 return "Cobalt RaQ";
36 case COBALT_BRD_ID_QUBE2:
37 return "Cobalt Qube2";
38 case COBALT_BRD_ID_RAQ2:
39 return "Cobalt RaQ2";
40 }
41 return "MIPS Cobalt";
42 }
43
44 /*
45 * Cobalt doesn't have PS/2 keyboard/mouse interfaces,
46 * keyboard controller is never used.
47 * Also PCI-ISA bridge DMA controller is never used.
48 */
49 static struct resource cobalt_reserved_resources[] = {
50 { /* dma1 */
51 .start = 0x00,
52 .end = 0x1f,
53 .name = "reserved",
54 .flags = IORESOURCE_BUSY | IORESOURCE_IO,
55 },
56 { /* keyboard */
57 .start = 0x60,
58 .end = 0x6f,
59 .name = "reserved",
60 .flags = IORESOURCE_BUSY | IORESOURCE_IO,
61 },
62 { /* dma page reg */
63 .start = 0x80,
64 .end = 0x8f,
65 .name = "reserved",
66 .flags = IORESOURCE_BUSY | IORESOURCE_IO,
67 },
68 { /* dma2 */
69 .start = 0xc0,
70 .end = 0xdf,
71 .name = "reserved",
72 .flags = IORESOURCE_BUSY | IORESOURCE_IO,
73 },
74 };
75
plat_mem_setup(void)76 void __init plat_mem_setup(void)
77 {
78 int i;
79
80 _machine_restart = cobalt_machine_restart;
81 _machine_halt = cobalt_machine_halt;
82 pm_power_off = cobalt_machine_halt;
83
84 set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
85
86 /* I/O port resource */
87 ioport_resource.end = 0x01ffffff;
88
89 /* These resources have been reserved by VIA SuperI/O chip. */
90 for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
91 request_resource(&ioport_resource, cobalt_reserved_resources + i);
92 }
93
94 /*
95 * Prom init. We read our one and only communication with the firmware.
96 * Grab the amount of installed memory.
97 * Better boot loaders (CoLo) pass a command line too :-)
98 */
99
prom_init(void)100 void __init prom_init(void)
101 {
102 unsigned long memsz;
103 int argc, i;
104 char **argv;
105
106 memsz = fw_arg0 & 0x7fff0000;
107 argc = fw_arg0 & 0x0000ffff;
108 argv = (char **)fw_arg1;
109
110 for (i = 1; i < argc; i++) {
111 strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
112 if (i < (argc - 1))
113 strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
114 }
115
116 memblock_add(0, memsz);
117
118 setup_8250_early_printk_port(CKSEG1ADDR(0x1c800000), 0, 0);
119 }
120