1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * GE SBC610 board support
4 *
5 * Author: Martyn Welch <martyn.welch@ge.com>
6 *
7 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
8 *
9 * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
10 * Copyright 2006 Freescale Semiconductor Inc.
11 *
12 * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
13 */
14
15 #include <linux/stddef.h>
16 #include <linux/kernel.h>
17 #include <linux/pci.h>
18 #include <linux/kdev_t.h>
19 #include <linux/delay.h>
20 #include <linux/seq_file.h>
21 #include <linux/of_platform.h>
22
23 #include <asm/time.h>
24 #include <asm/machdep.h>
25 #include <asm/pci-bridge.h>
26 #include <asm/prom.h>
27 #include <mm/mmu_decl.h>
28 #include <asm/udbg.h>
29
30 #include <asm/mpic.h>
31 #include <asm/nvram.h>
32
33 #include <sysdev/fsl_pci.h>
34 #include <sysdev/fsl_soc.h>
35 #include <sysdev/ge/ge_pic.h>
36
37 #include "mpc86xx.h"
38
39 #undef DEBUG
40
41 #ifdef DEBUG
42 #define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
43 #else
44 #define DBG (fmt...) do { } while (0)
45 #endif
46
47 void __iomem *sbc610_regs;
48
gef_sbc610_init_irq(void)49 static void __init gef_sbc610_init_irq(void)
50 {
51 struct device_node *cascade_node = NULL;
52
53 mpc86xx_init_irq();
54
55 /*
56 * There is a simple interrupt handler in the main FPGA, this needs
57 * to be cascaded into the MPIC
58 */
59 cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
60 if (!cascade_node) {
61 printk(KERN_WARNING "SBC610: No FPGA PIC\n");
62 return;
63 }
64
65 gef_pic_init(cascade_node);
66 of_node_put(cascade_node);
67 }
68
gef_sbc610_setup_arch(void)69 static void __init gef_sbc610_setup_arch(void)
70 {
71 struct device_node *regs;
72
73 printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
74
75 #ifdef CONFIG_SMP
76 mpc86xx_smp_init();
77 #endif
78
79 fsl_pci_assign_primary();
80
81 /* Remap basic board registers */
82 regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
83 if (regs) {
84 sbc610_regs = of_iomap(regs, 0);
85 if (sbc610_regs == NULL)
86 printk(KERN_WARNING "Unable to map board registers\n");
87 of_node_put(regs);
88 }
89
90 #if defined(CONFIG_MMIO_NVRAM)
91 mmio_nvram_init();
92 #endif
93 }
94
95 /* Return the PCB revision */
gef_sbc610_get_pcb_rev(void)96 static unsigned int gef_sbc610_get_pcb_rev(void)
97 {
98 unsigned int reg;
99
100 reg = ioread32(sbc610_regs);
101 return (reg >> 8) & 0xff;
102 }
103
104 /* Return the board (software) revision */
gef_sbc610_get_board_rev(void)105 static unsigned int gef_sbc610_get_board_rev(void)
106 {
107 unsigned int reg;
108
109 reg = ioread32(sbc610_regs);
110 return (reg >> 16) & 0xff;
111 }
112
113 /* Return the FPGA revision */
gef_sbc610_get_fpga_rev(void)114 static unsigned int gef_sbc610_get_fpga_rev(void)
115 {
116 unsigned int reg;
117
118 reg = ioread32(sbc610_regs);
119 return (reg >> 24) & 0xf;
120 }
121
gef_sbc610_show_cpuinfo(struct seq_file * m)122 static void gef_sbc610_show_cpuinfo(struct seq_file *m)
123 {
124 uint svid = mfspr(SPRN_SVR);
125
126 seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
127
128 seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
129 ('A' + gef_sbc610_get_board_rev() - 1));
130 seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
131
132 seq_printf(m, "SVR\t\t: 0x%x\n", svid);
133 }
134
gef_sbc610_nec_fixup(struct pci_dev * pdev)135 static void gef_sbc610_nec_fixup(struct pci_dev *pdev)
136 {
137 unsigned int val;
138
139 /* Do not do the fixup on other platforms! */
140 if (!machine_is(gef_sbc610))
141 return;
142
143 printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
144
145 /* Ensure ports 1, 2, 3, 4 & 5 are enabled */
146 pci_read_config_dword(pdev, 0xe0, &val);
147 pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
148
149 /* System clock is 48-MHz Oscillator and EHCI Enabled. */
150 pci_write_config_dword(pdev, 0xe4, 1 << 5);
151 }
152 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
153 gef_sbc610_nec_fixup);
154
155 /*
156 * Called very early, device-tree isn't unflattened
157 *
158 * This function is called to determine whether the BSP is compatible with the
159 * supplied device-tree, which is assumed to be the correct one for the actual
160 * board. It is expected thati, in the future, a kernel may support multiple
161 * boards.
162 */
gef_sbc610_probe(void)163 static int __init gef_sbc610_probe(void)
164 {
165 if (of_machine_is_compatible("gef,sbc610"))
166 return 1;
167
168 return 0;
169 }
170
171 machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices);
172
define_machine(gef_sbc610)173 define_machine(gef_sbc610) {
174 .name = "GE SBC610",
175 .probe = gef_sbc610_probe,
176 .setup_arch = gef_sbc610_setup_arch,
177 .init_IRQ = gef_sbc610_init_irq,
178 .show_cpuinfo = gef_sbc610_show_cpuinfo,
179 .get_irq = mpic_get_irq,
180 .time_init = mpc86xx_time_init,
181 .calibrate_decr = generic_calibrate_decr,
182 .progress = udbg_progress,
183 #ifdef CONFIG_PCI
184 .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
185 #endif
186 };
187