1# SPDX-License-Identifier: GPL-2.0
2#
3# Block layer core configuration
4#
5menuconfig BLOCK
6       bool "Enable the block layer" if EXPERT
7       default y
8       select SBITMAP
9       select SRCU
10       help
11	 Provide block layer support for the kernel.
12
13	 Disable this option to remove the block layer support from the
14	 kernel. This may be useful for embedded devices.
15
16	 If this option is disabled:
17
18	   - block device files will become unusable
19	   - some filesystems (such as ext3) will become unavailable.
20
21	 Also, SCSI character devices and USB storage will be disabled since
22	 they make use of various block layer definitions and facilities.
23
24	 Say Y here unless you know you really don't want to mount disks and
25	 suchlike.
26
27if BLOCK
28
29config BLK_RQ_ALLOC_TIME
30	bool
31
32config BLK_CGROUP_RWSTAT
33	bool
34
35config BLK_DEV_BSG_COMMON
36	tristate
37
38config BLK_DEV_BSGLIB
39	bool "Block layer SG support v4 helper lib"
40	select BLK_DEV_BSG_COMMON
41	help
42	  Subsystems will normally enable this if needed. Users will not
43	  normally need to manually enable this.
44
45	  If unsure, say N.
46
47config BLK_DEV_INTEGRITY
48	bool "Block layer data integrity support"
49	help
50	Some storage devices allow extra information to be
51	stored/retrieved to help protect the data.  The block layer
52	data integrity option provides hooks which can be used by
53	filesystems to ensure better data integrity.
54
55	Say yes here if you have a storage device that provides the
56	T10/SCSI Data Integrity Field or the T13/ATA External Path
57	Protection.  If in doubt, say N.
58
59config BLK_DEV_INTEGRITY_T10
60	tristate
61	depends on BLK_DEV_INTEGRITY
62	select CRC_T10DIF
63
64config BLK_DEV_ZONED
65	bool "Zoned block device support"
66	select MQ_IOSCHED_DEADLINE
67	help
68	Block layer zoned block device support. This option enables
69	support for ZAC/ZBC/ZNS host-managed and host-aware zoned block
70	devices.
71
72	Say yes here if you have a ZAC, ZBC, or ZNS storage device.
73
74config BLK_DEV_THROTTLING
75	bool "Block layer bio throttling support"
76	depends on BLK_CGROUP
77	select BLK_CGROUP_RWSTAT
78	help
79	Block layer bio throttling support. It can be used to limit
80	the IO rate to a device. IO rate policies are per cgroup and
81	one needs to mount and use blkio cgroup controller for creating
82	cgroups and specifying per device IO rate policies.
83
84	See Documentation/admin-guide/cgroup-v1/blkio-controller.rst for more information.
85
86config BLK_DEV_THROTTLING_LOW
87	bool "Block throttling .low limit interface support (EXPERIMENTAL)"
88	depends on BLK_DEV_THROTTLING
89	help
90	Add .low limit interface for block throttling. The low limit is a best
91	effort limit to prioritize cgroups. Depending on the setting, the limit
92	can be used to protect cgroups in terms of bandwidth/iops and better
93	utilize disk resource.
94
95	Note, this is an experimental interface and could be changed someday.
96
97config BLK_WBT
98	bool "Enable support for block device writeback throttling"
99	help
100	Enabling this option enables the block layer to throttle buffered
101	background writeback from the VM, making it more smooth and having
102	less impact on foreground operations. The throttling is done
103	dynamically on an algorithm loosely based on CoDel, factoring in
104	the realtime performance of the disk.
105
106config BLK_WBT_MQ
107	bool "Enable writeback throttling by default"
108	default y
109	depends on BLK_WBT
110	help
111	Enable writeback throttling by default for request-based block devices.
112
113config BLK_CGROUP_IOLATENCY
114	bool "Enable support for latency based cgroup IO protection"
115	depends on BLK_CGROUP
116	help
117	Enabling this option enables the .latency interface for IO throttling.
118	The IO controller will attempt to maintain average IO latencies below
119	the configured latency target, throttling anybody with a higher latency
120	target than the victimized group.
121
122	Note, this is an experimental interface and could be changed someday.
123
124config BLK_CGROUP_FC_APPID
125	bool "Enable support to track FC I/O Traffic across cgroup applications"
126	depends on BLK_CGROUP && NVME_FC
127	help
128	  Enabling this option enables the support to track FC I/O traffic across
129	  cgroup applications. It enables the Fabric and the storage targets to
130	  identify, monitor, and handle FC traffic based on VM tags by inserting
131	  application specific identification into the FC frame.
132
133config BLK_CGROUP_IOCOST
134	bool "Enable support for cost model based cgroup IO controller"
135	depends on BLK_CGROUP
136	select BLK_RQ_IO_DATA_LEN
137	select BLK_RQ_ALLOC_TIME
138	help
139	Enabling this option enables the .weight interface for cost
140	model based proportional IO control.  The IO controller
141	distributes IO capacity between different groups based on
142	their share of the overall weight distribution.
143
144config BLK_CGROUP_IOPRIO
145	bool "Cgroup I/O controller for assigning an I/O priority class"
146	depends on BLK_CGROUP
147	help
148	Enable the .prio interface for assigning an I/O priority class to
149	requests. The I/O priority class affects the order in which an I/O
150	scheduler and block devices process requests. Only some I/O schedulers
151	and some block devices support I/O priorities.
152
153config BLK_DEBUG_FS
154	bool "Block layer debugging information in debugfs"
155	default y
156	depends on DEBUG_FS
157	help
158	Include block layer debugging information in debugfs. This information
159	is mostly useful for kernel developers, but it doesn't incur any cost
160	at runtime.
161
162	Unless you are building a kernel for a tiny system, you should
163	say Y here.
164
165config BLK_DEBUG_FS_ZONED
166       bool
167       default BLK_DEBUG_FS && BLK_DEV_ZONED
168
169config BLK_SED_OPAL
170	bool "Logic for interfacing with Opal enabled SEDs"
171	help
172	Builds Logic for interfacing with Opal enabled controllers.
173	Enabling this option enables users to setup/unlock/lock
174	Locking ranges for SED devices using the Opal protocol.
175
176config BLK_INLINE_ENCRYPTION
177	bool "Enable inline encryption support in block layer"
178	help
179	  Build the blk-crypto subsystem. Enabling this lets the
180	  block layer handle encryption, so users can take
181	  advantage of inline encryption hardware if present.
182
183config BLK_INLINE_ENCRYPTION_FALLBACK
184	bool "Enable crypto API fallback for blk-crypto"
185	depends on BLK_INLINE_ENCRYPTION
186	select CRYPTO
187	select CRYPTO_SKCIPHER
188	help
189	  Enabling this lets the block layer handle inline encryption
190	  by falling back to the kernel crypto API when inline
191	  encryption hardware is not present.
192
193source "block/partitions/Kconfig"
194
195config BLOCK_COMPAT
196	def_bool COMPAT
197
198config BLK_MQ_PCI
199	def_bool PCI
200
201config BLK_MQ_VIRTIO
202	bool
203	depends on VIRTIO
204	default y
205
206config BLK_MQ_RDMA
207	bool
208	depends on INFINIBAND
209	default y
210
211config BLK_PM
212	def_bool PM
213
214# do not use in new code
215config BLOCK_HOLDER_DEPRECATED
216	bool
217
218source "block/Kconfig.iosched"
219
220endif # BLOCK
221