1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * comedi/drivers/ni_routing/ni_route_values.h 4 * Route information for NI boards. 5 * 6 * COMEDI - Linux Control and Measurement Device Interface 7 * Copyright (C) 2016 Spencer E. Olson <olsonse@umich.edu> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 */ 19 20 #ifndef _COMEDI_DRIVERS_NI_ROUTINT_NI_ROUTE_VALUES_H 21 #define _COMEDI_DRIVERS_NI_ROUTINT_NI_ROUTE_VALUES_H 22 23 #include "../../comedi.h" 24 #include <linux/types.h> 25 26 /* 27 * This file includes the tables that are a list of all the values of various 28 * signals routes available on NI hardware. In many cases, one does not 29 * explicitly make these routes, rather one might indicate that something is 30 * used as the source of one particular trigger or another (using 31 * *_src=TRIG_EXT). 32 * 33 * This file is meant to be included by comedi/drivers/ni_routes.c 34 */ 35 36 #define B(x) ((x) - NI_NAMES_BASE) 37 38 /** Marks a register value as valid, implemented, and tested. */ 39 #define V(x) (((x) & 0x7f) | 0x80) 40 41 #ifndef NI_ROUTE_VALUE_EXTERNAL_CONVERSION 42 /** Marks a register value as implemented but needing testing. */ 43 #define I(x) V(x) 44 /** Marks a register value as not implemented. */ 45 #define U(x) 0x0 46 47 typedef u8 register_type; 48 #else 49 /** Marks a register value as implemented but needing testing. */ 50 #define I(x) (((x) & 0x7f) | 0x100) 51 /** Marks a register value as not implemented. */ 52 #define U(x) (((x) & 0x7f) | 0x200) 53 54 /** Tests whether a register is marked as valid/implemented/tested */ 55 #define MARKED_V(x) (((x) & 0x80) != 0) 56 /** Tests whether a register is implemented but not tested */ 57 #define MARKED_I(x) (((x) & 0x100) != 0) 58 /** Tests whether a register is not implemented */ 59 #define MARKED_U(x) (((x) & 0x200) != 0) 60 61 /* need more space to store extra marks */ 62 typedef u16 register_type; 63 #endif 64 65 /* Mask out the marking bit(s). */ 66 #define UNMARK(x) ((x) & 0x7f) 67 68 /* 69 * Gi_SRC(x,1) implements Gi_Src_SubSelect = 1 70 * 71 * This appears to only really be a valid MUX for m-series devices. 72 */ 73 #define Gi_SRC(val, subsel) ((val) | ((subsel) << 6)) 74 75 /** 76 * struct family_route_values - Register values for all routes for a particular 77 * family. 78 * @family: lower-case string representation of a specific series or family of 79 * devices from National Instruments where each member of this family 80 * shares the same register values for the various signal MUXes. It 81 * should be noted that not all devices of any family have access to 82 * all routes defined. 83 * @register_values: Table of all register values for various signal MUXes on 84 * National Instruments devices. The first index of this table is the 85 * signal destination (i.e. identification of the signal MUX). The 86 * second index of this table is the signal source (i.e. input of the 87 * signal MUX). 88 */ 89 struct family_route_values { 90 const char *family; 91 const register_type register_values[NI_NUM_NAMES][NI_NUM_NAMES]; 92 93 }; 94 95 extern const struct family_route_values *const ni_all_route_values[]; 96 97 #endif /* _COMEDI_DRIVERS_NI_ROUTINT_NI_ROUTE_VALUES_H */ 98