1# SPDX-License-Identifier: GPL-2.0-only
2menu "IEEE 1394 (FireWire) support"
3	depends on PCI || COMPILE_TEST
4	# firewire-core does not depend on PCI but is
5	# not useful without PCI controller driver
6
7config FIREWIRE
8	tristate "FireWire driver stack"
9	select CRC_ITU_T
10	help
11	  This is the new-generation IEEE 1394 (FireWire) driver stack
12	  a.k.a. Juju, a new implementation designed for robustness and
13	  simplicity.
14	  See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
15	  for information about migration from the older Linux 1394 stack
16	  to the new driver stack.
17
18	  To compile this driver as a module, say M here: the module will be
19	  called firewire-core.
20
21config FIREWIRE_OHCI
22	tristate "OHCI-1394 controllers"
23	depends on PCI && FIREWIRE && MMU
24	help
25	  Enable this driver if you have a FireWire controller based
26	  on the OHCI specification.  For all practical purposes, this
27	  is the only chipset in use, so say Y here.
28
29	  To compile this driver as a module, say M here:  The module will be
30	  called firewire-ohci.
31
32config FIREWIRE_SBP2
33	tristate "Storage devices (SBP-2 protocol)"
34	depends on FIREWIRE && SCSI
35	help
36	  This option enables you to use SBP-2 devices connected to a
37	  FireWire bus.  SBP-2 devices include storage devices like
38	  harddisks and DVD drives, also some other FireWire devices
39	  like scanners.
40
41	  To compile this driver as a module, say M here:  The module will be
42	  called firewire-sbp2.
43
44	  You should also enable support for disks, CD-ROMs, etc. in the SCSI
45	  configuration section.
46
47config FIREWIRE_NET
48	tristate "IP networking over 1394"
49	depends on FIREWIRE && INET
50	help
51	  This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity
52	  with other implementations of RFC 2734/3146 as found on several
53	  operating systems.  Multicast support is currently limited.
54
55	  To compile this driver as a module, say M here:  The module will be
56	  called firewire-net.
57
58config FIREWIRE_NOSY
59	tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
60	depends on PCI
61	help
62	  Nosy is an IEEE 1394 packet sniffer that is used for protocol
63	  analysis and in development of IEEE 1394 drivers, applications,
64	  or firmwares.
65
66	  This driver lets you use a Texas Instruments PCILynx 1394 to PCI
67	  link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
68	  PCILynx is a nowadays very rare IEEE 1394 controller which is
69	  not OHCI 1394 compliant.
70
71	  The following cards are known to be based on PCILynx or PCILynx-2:
72	  IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
73	  (PCI card), Newer Technology FireWire 2 Go (CardBus card),
74	  Apple Power Mac G3 blue & white and G4 with PCI graphics
75	  (onboard controller).
76
77	  To compile this driver as a module, say M here:  The module will be
78	  called nosy.  Source code of a userspace interface to nosy, called
79	  nosy-dump, can be found in tools/firewire/ of the kernel sources.
80
81	  If unsure, say N.
82
83endmenu
84