1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2017-2018, Intel Corporation
4  */
5 
6 #include <linux/completion.h>
7 #include <linux/delay.h>
8 #include <linux/genalloc.h>
9 #include <linux/io.h>
10 #include <linux/kfifo.h>
11 #include <linux/kthread.h>
12 #include <linux/module.h>
13 #include <linux/mutex.h>
14 #include <linux/of.h>
15 #include <linux/of_platform.h>
16 #include <linux/platform_device.h>
17 #include <linux/slab.h>
18 #include <linux/spinlock.h>
19 #include <linux/firmware/intel/stratix10-smc.h>
20 #include <linux/firmware/intel/stratix10-svc-client.h>
21 #include <linux/types.h>
22 
23 /**
24  * SVC_NUM_DATA_IN_FIFO - number of struct stratix10_svc_data in the FIFO
25  *
26  * SVC_NUM_CHANNEL - number of channel supported by service layer driver
27  *
28  * FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS - claim back the submitted buffer(s)
29  * from the secure world for FPGA manager to reuse, or to free the buffer(s)
30  * when all bit-stream data had be send.
31  *
32  * FPGA_CONFIG_STATUS_TIMEOUT_SEC - poll the FPGA configuration status,
33  * service layer will return error to FPGA manager when timeout occurs,
34  * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
35  */
36 #define SVC_NUM_DATA_IN_FIFO			32
37 #define SVC_NUM_CHANNEL				2
38 #define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS	200
39 #define FPGA_CONFIG_STATUS_TIMEOUT_SEC		30
40 
41 /* stratix10 service layer clients */
42 #define STRATIX10_RSU				"stratix10-rsu"
43 
44 typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long,
45 			     unsigned long, unsigned long, unsigned long,
46 			     unsigned long, unsigned long,
47 			     struct arm_smccc_res *);
48 struct stratix10_svc_chan;
49 
50 /**
51  * struct stratix10_svc - svc private data
52  * @stratix10_svc_rsu: pointer to stratix10 RSU device
53  */
54 struct stratix10_svc {
55 	struct platform_device *stratix10_svc_rsu;
56 };
57 
58 /**
59  * struct stratix10_svc_sh_memory - service shared memory structure
60  * @sync_complete: state for a completion
61  * @addr: physical address of shared memory block
62  * @size: size of shared memory block
63  * @invoke_fn: function to issue secure monitor or hypervisor call
64  *
65  * This struct is used to save physical address and size of shared memory
66  * block. The shared memory blocked is allocated by secure monitor software
67  * at secure world.
68  *
69  * Service layer driver uses the physical address and size to create a memory
70  * pool, then allocates data buffer from that memory pool for service client.
71  */
72 struct stratix10_svc_sh_memory {
73 	struct completion sync_complete;
74 	unsigned long addr;
75 	unsigned long size;
76 	svc_invoke_fn *invoke_fn;
77 };
78 
79 /**
80  * struct stratix10_svc_data_mem - service memory structure
81  * @vaddr: virtual address
82  * @paddr: physical address
83  * @size: size of memory
84  * @node: link list head node
85  *
86  * This struct is used in a list that keeps track of buffers which have
87  * been allocated or freed from the memory pool. Service layer driver also
88  * uses this struct to transfer physical address to virtual address.
89  */
90 struct stratix10_svc_data_mem {
91 	void *vaddr;
92 	phys_addr_t paddr;
93 	size_t size;
94 	struct list_head node;
95 };
96 
97 /**
98  * struct stratix10_svc_data - service data structure
99  * @chan: service channel
100  * @paddr: playload physical address
101  * @size: playload size
102  * @command: service command requested by client
103  * @flag: configuration type (full or partial)
104  * @arg: args to be passed via registers and not physically mapped buffers
105  *
106  * This struct is used in service FIFO for inter-process communication.
107  */
108 struct stratix10_svc_data {
109 	struct stratix10_svc_chan *chan;
110 	phys_addr_t paddr;
111 	size_t size;
112 	u32 command;
113 	u32 flag;
114 	u64 arg[3];
115 };
116 
117 /**
118  * struct stratix10_svc_controller - service controller
119  * @dev: device
120  * @chans: array of service channels
121  * @num_chans: number of channels in 'chans' array
122  * @num_active_client: number of active service client
123  * @node: list management
124  * @genpool: memory pool pointing to the memory region
125  * @task: pointer to the thread task which handles SMC or HVC call
126  * @svc_fifo: a queue for storing service message data
127  * @complete_status: state for completion
128  * @svc_fifo_lock: protect access to service message data queue
129  * @invoke_fn: function to issue secure monitor call or hypervisor call
130  *
131  * This struct is used to create communication channels for service clients, to
132  * handle secure monitor or hypervisor call.
133  */
134 struct stratix10_svc_controller {
135 	struct device *dev;
136 	struct stratix10_svc_chan *chans;
137 	int num_chans;
138 	int num_active_client;
139 	struct list_head node;
140 	struct gen_pool *genpool;
141 	struct task_struct *task;
142 	struct kfifo svc_fifo;
143 	struct completion complete_status;
144 	spinlock_t svc_fifo_lock;
145 	svc_invoke_fn *invoke_fn;
146 };
147 
148 /**
149  * struct stratix10_svc_chan - service communication channel
150  * @ctrl: pointer to service controller which is the provider of this channel
151  * @scl: pointer to service client which owns the channel
152  * @name: service client name associated with the channel
153  * @lock: protect access to the channel
154  *
155  * This struct is used by service client to communicate with service layer, each
156  * service client has its own channel created by service controller.
157  */
158 struct stratix10_svc_chan {
159 	struct stratix10_svc_controller *ctrl;
160 	struct stratix10_svc_client *scl;
161 	char *name;
162 	spinlock_t lock;
163 };
164 
165 static LIST_HEAD(svc_ctrl);
166 static LIST_HEAD(svc_data_mem);
167 
168 /**
169  * svc_pa_to_va() - translate physical address to virtual address
170  * @addr: to be translated physical address
171  *
172  * Return: valid virtual address or NULL if the provided physical
173  * address doesn't exist.
174  */
svc_pa_to_va(unsigned long addr)175 static void *svc_pa_to_va(unsigned long addr)
176 {
177 	struct stratix10_svc_data_mem *pmem;
178 
179 	pr_debug("claim back P-addr=0x%016x\n", (unsigned int)addr);
180 	list_for_each_entry(pmem, &svc_data_mem, node)
181 		if (pmem->paddr == addr)
182 			return pmem->vaddr;
183 
184 	/* physical address is not found */
185 	return NULL;
186 }
187 
188 /**
189  * svc_thread_cmd_data_claim() - claim back buffer from the secure world
190  * @ctrl: pointer to service layer controller
191  * @p_data: pointer to service data structure
192  * @cb_data: pointer to callback data structure to service client
193  *
194  * Claim back the submitted buffers from the secure world and pass buffer
195  * back to service client (FPGA manager, etc) for reuse.
196  */
svc_thread_cmd_data_claim(struct stratix10_svc_controller * ctrl,struct stratix10_svc_data * p_data,struct stratix10_svc_cb_data * cb_data)197 static void svc_thread_cmd_data_claim(struct stratix10_svc_controller *ctrl,
198 				      struct stratix10_svc_data *p_data,
199 				      struct stratix10_svc_cb_data *cb_data)
200 {
201 	struct arm_smccc_res res;
202 	unsigned long timeout;
203 
204 	reinit_completion(&ctrl->complete_status);
205 	timeout = msecs_to_jiffies(FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS);
206 
207 	pr_debug("%s: claim back the submitted buffer\n", __func__);
208 	do {
209 		ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE,
210 				0, 0, 0, 0, 0, 0, 0, &res);
211 
212 		if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
213 			if (!res.a1) {
214 				complete(&ctrl->complete_status);
215 				break;
216 			}
217 			cb_data->status = BIT(SVC_STATUS_BUFFER_DONE);
218 			cb_data->kaddr1 = svc_pa_to_va(res.a1);
219 			cb_data->kaddr2 = (res.a2) ?
220 					  svc_pa_to_va(res.a2) : NULL;
221 			cb_data->kaddr3 = (res.a3) ?
222 					  svc_pa_to_va(res.a3) : NULL;
223 			p_data->chan->scl->receive_cb(p_data->chan->scl,
224 						      cb_data);
225 		} else {
226 			pr_debug("%s: secure world busy, polling again\n",
227 				 __func__);
228 		}
229 	} while (res.a0 == INTEL_SIP_SMC_STATUS_OK ||
230 		 res.a0 == INTEL_SIP_SMC_STATUS_BUSY ||
231 		 wait_for_completion_timeout(&ctrl->complete_status, timeout));
232 }
233 
234 /**
235  * svc_thread_cmd_config_status() - check configuration status
236  * @ctrl: pointer to service layer controller
237  * @p_data: pointer to service data structure
238  * @cb_data: pointer to callback data structure to service client
239  *
240  * Check whether the secure firmware at secure world has finished the FPGA
241  * configuration, and then inform FPGA manager the configuration status.
242  */
svc_thread_cmd_config_status(struct stratix10_svc_controller * ctrl,struct stratix10_svc_data * p_data,struct stratix10_svc_cb_data * cb_data)243 static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl,
244 					 struct stratix10_svc_data *p_data,
245 					 struct stratix10_svc_cb_data *cb_data)
246 {
247 	struct arm_smccc_res res;
248 	int count_in_sec;
249 
250 	cb_data->kaddr1 = NULL;
251 	cb_data->kaddr2 = NULL;
252 	cb_data->kaddr3 = NULL;
253 	cb_data->status = BIT(SVC_STATUS_ERROR);
254 
255 	pr_debug("%s: polling config status\n", __func__);
256 
257 	count_in_sec = FPGA_CONFIG_STATUS_TIMEOUT_SEC;
258 	while (count_in_sec) {
259 		ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_ISDONE,
260 				0, 0, 0, 0, 0, 0, 0, &res);
261 		if ((res.a0 == INTEL_SIP_SMC_STATUS_OK) ||
262 		    (res.a0 == INTEL_SIP_SMC_STATUS_ERROR))
263 			break;
264 
265 		/*
266 		 * configuration is still in progress, wait one second then
267 		 * poll again
268 		 */
269 		msleep(1000);
270 		count_in_sec--;
271 	}
272 
273 	if (res.a0 == INTEL_SIP_SMC_STATUS_OK && count_in_sec)
274 		cb_data->status = BIT(SVC_STATUS_COMPLETED);
275 
276 	p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
277 }
278 
279 /**
280  * svc_thread_recv_status_ok() - handle the successful status
281  * @p_data: pointer to service data structure
282  * @cb_data: pointer to callback data structure to service client
283  * @res: result from SMC or HVC call
284  *
285  * Send back the correspond status to the service clients.
286  */
svc_thread_recv_status_ok(struct stratix10_svc_data * p_data,struct stratix10_svc_cb_data * cb_data,struct arm_smccc_res res)287 static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
288 				      struct stratix10_svc_cb_data *cb_data,
289 				      struct arm_smccc_res res)
290 {
291 	cb_data->kaddr1 = NULL;
292 	cb_data->kaddr2 = NULL;
293 	cb_data->kaddr3 = NULL;
294 
295 	switch (p_data->command) {
296 	case COMMAND_RECONFIG:
297 	case COMMAND_RSU_UPDATE:
298 	case COMMAND_RSU_NOTIFY:
299 		cb_data->status = BIT(SVC_STATUS_OK);
300 		break;
301 	case COMMAND_RECONFIG_DATA_SUBMIT:
302 		cb_data->status = BIT(SVC_STATUS_BUFFER_SUBMITTED);
303 		break;
304 	case COMMAND_RECONFIG_STATUS:
305 		cb_data->status = BIT(SVC_STATUS_COMPLETED);
306 		break;
307 	case COMMAND_RSU_RETRY:
308 	case COMMAND_RSU_MAX_RETRY:
309 		cb_data->status = BIT(SVC_STATUS_OK);
310 		cb_data->kaddr1 = &res.a1;
311 		break;
312 	case COMMAND_RSU_DCMF_VERSION:
313 		cb_data->status = BIT(SVC_STATUS_OK);
314 		cb_data->kaddr1 = &res.a1;
315 		cb_data->kaddr2 = &res.a2;
316 		break;
317 	default:
318 		pr_warn("it shouldn't happen\n");
319 		break;
320 	}
321 
322 	pr_debug("%s: call receive_cb\n", __func__);
323 	p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
324 }
325 
326 /**
327  * svc_normal_to_secure_thread() - the function to run in the kthread
328  * @data: data pointer for kthread function
329  *
330  * Service layer driver creates stratix10_svc_smc_hvc_call kthread on CPU
331  * node 0, its function stratix10_svc_secure_call_thread is used to handle
332  * SMC or HVC calls between kernel driver and secure monitor software.
333  *
334  * Return: 0 for success or -ENOMEM on error.
335  */
svc_normal_to_secure_thread(void * data)336 static int svc_normal_to_secure_thread(void *data)
337 {
338 	struct stratix10_svc_controller
339 			*ctrl = (struct stratix10_svc_controller *)data;
340 	struct stratix10_svc_data *pdata;
341 	struct stratix10_svc_cb_data *cbdata;
342 	struct arm_smccc_res res;
343 	unsigned long a0, a1, a2;
344 	int ret_fifo = 0;
345 
346 	pdata =  kmalloc(sizeof(*pdata), GFP_KERNEL);
347 	if (!pdata)
348 		return -ENOMEM;
349 
350 	cbdata = kmalloc(sizeof(*cbdata), GFP_KERNEL);
351 	if (!cbdata) {
352 		kfree(pdata);
353 		return -ENOMEM;
354 	}
355 
356 	/* default set, to remove build warning */
357 	a0 = INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK;
358 	a1 = 0;
359 	a2 = 0;
360 
361 	pr_debug("smc_hvc_shm_thread is running\n");
362 
363 	while (!kthread_should_stop()) {
364 		ret_fifo = kfifo_out_spinlocked(&ctrl->svc_fifo,
365 						pdata, sizeof(*pdata),
366 						&ctrl->svc_fifo_lock);
367 
368 		if (!ret_fifo)
369 			continue;
370 
371 		pr_debug("get from FIFO pa=0x%016x, command=%u, size=%u\n",
372 			 (unsigned int)pdata->paddr, pdata->command,
373 			 (unsigned int)pdata->size);
374 
375 		switch (pdata->command) {
376 		case COMMAND_RECONFIG_DATA_CLAIM:
377 			svc_thread_cmd_data_claim(ctrl, pdata, cbdata);
378 			continue;
379 		case COMMAND_RECONFIG:
380 			a0 = INTEL_SIP_SMC_FPGA_CONFIG_START;
381 			pr_debug("conf_type=%u\n", (unsigned int)pdata->flag);
382 			a1 = pdata->flag;
383 			a2 = 0;
384 			break;
385 		case COMMAND_RECONFIG_DATA_SUBMIT:
386 			a0 = INTEL_SIP_SMC_FPGA_CONFIG_WRITE;
387 			a1 = (unsigned long)pdata->paddr;
388 			a2 = (unsigned long)pdata->size;
389 			break;
390 		case COMMAND_RECONFIG_STATUS:
391 			a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE;
392 			a1 = 0;
393 			a2 = 0;
394 			break;
395 		case COMMAND_RSU_STATUS:
396 			a0 = INTEL_SIP_SMC_RSU_STATUS;
397 			a1 = 0;
398 			a2 = 0;
399 			break;
400 		case COMMAND_RSU_UPDATE:
401 			a0 = INTEL_SIP_SMC_RSU_UPDATE;
402 			a1 = pdata->arg[0];
403 			a2 = 0;
404 			break;
405 		case COMMAND_RSU_NOTIFY:
406 			a0 = INTEL_SIP_SMC_RSU_NOTIFY;
407 			a1 = pdata->arg[0];
408 			a2 = 0;
409 			break;
410 		case COMMAND_RSU_RETRY:
411 			a0 = INTEL_SIP_SMC_RSU_RETRY_COUNTER;
412 			a1 = 0;
413 			a2 = 0;
414 			break;
415 		case COMMAND_RSU_MAX_RETRY:
416 			a0 = INTEL_SIP_SMC_RSU_MAX_RETRY;
417 			a1 = 0;
418 			a2 = 0;
419 			break;
420 		case COMMAND_RSU_DCMF_VERSION:
421 			a0 = INTEL_SIP_SMC_RSU_DCMF_VERSION;
422 			a1 = 0;
423 			a2 = 0;
424 			break;
425 		default:
426 			pr_warn("it shouldn't happen\n");
427 			break;
428 		}
429 		pr_debug("%s: before SMC call -- a0=0x%016x a1=0x%016x",
430 			 __func__, (unsigned int)a0, (unsigned int)a1);
431 		pr_debug(" a2=0x%016x\n", (unsigned int)a2);
432 
433 		ctrl->invoke_fn(a0, a1, a2, 0, 0, 0, 0, 0, &res);
434 
435 		pr_debug("%s: after SMC call -- res.a0=0x%016x",
436 			 __func__, (unsigned int)res.a0);
437 		pr_debug(" res.a1=0x%016x, res.a2=0x%016x",
438 			 (unsigned int)res.a1, (unsigned int)res.a2);
439 		pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
440 
441 		if (pdata->command == COMMAND_RSU_STATUS) {
442 			if (res.a0 == INTEL_SIP_SMC_RSU_ERROR)
443 				cbdata->status = BIT(SVC_STATUS_ERROR);
444 			else
445 				cbdata->status = BIT(SVC_STATUS_OK);
446 
447 			cbdata->kaddr1 = &res;
448 			cbdata->kaddr2 = NULL;
449 			cbdata->kaddr3 = NULL;
450 			pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
451 			continue;
452 		}
453 
454 		switch (res.a0) {
455 		case INTEL_SIP_SMC_STATUS_OK:
456 			svc_thread_recv_status_ok(pdata, cbdata, res);
457 			break;
458 		case INTEL_SIP_SMC_STATUS_BUSY:
459 			switch (pdata->command) {
460 			case COMMAND_RECONFIG_DATA_SUBMIT:
461 				svc_thread_cmd_data_claim(ctrl,
462 							  pdata, cbdata);
463 				break;
464 			case COMMAND_RECONFIG_STATUS:
465 				svc_thread_cmd_config_status(ctrl,
466 							     pdata, cbdata);
467 				break;
468 			default:
469 				pr_warn("it shouldn't happen\n");
470 				break;
471 			}
472 			break;
473 		case INTEL_SIP_SMC_STATUS_REJECTED:
474 			pr_debug("%s: STATUS_REJECTED\n", __func__);
475 			break;
476 		case INTEL_SIP_SMC_STATUS_ERROR:
477 		case INTEL_SIP_SMC_RSU_ERROR:
478 			pr_err("%s: STATUS_ERROR\n", __func__);
479 			cbdata->status = BIT(SVC_STATUS_ERROR);
480 			cbdata->kaddr1 = NULL;
481 			cbdata->kaddr2 = NULL;
482 			cbdata->kaddr3 = NULL;
483 			pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
484 			break;
485 		default:
486 			pr_warn("Secure firmware doesn't support...\n");
487 
488 			/*
489 			 * be compatible with older version firmware which
490 			 * doesn't support RSU notify or retry
491 			 */
492 			if ((pdata->command == COMMAND_RSU_RETRY) ||
493 			    (pdata->command == COMMAND_RSU_MAX_RETRY) ||
494 				(pdata->command == COMMAND_RSU_NOTIFY)) {
495 				cbdata->status =
496 					BIT(SVC_STATUS_NO_SUPPORT);
497 				cbdata->kaddr1 = NULL;
498 				cbdata->kaddr2 = NULL;
499 				cbdata->kaddr3 = NULL;
500 				pdata->chan->scl->receive_cb(
501 					pdata->chan->scl, cbdata);
502 			}
503 			break;
504 
505 		}
506 	}
507 
508 	kfree(cbdata);
509 	kfree(pdata);
510 
511 	return 0;
512 }
513 
514 /**
515  * svc_normal_to_secure_shm_thread() - the function to run in the kthread
516  * @data: data pointer for kthread function
517  *
518  * Service layer driver creates stratix10_svc_smc_hvc_shm kthread on CPU
519  * node 0, its function stratix10_svc_secure_shm_thread is used to query the
520  * physical address of memory block reserved by secure monitor software at
521  * secure world.
522  *
523  * svc_normal_to_secure_shm_thread() terminates directly since it is a
524  * standlone thread for which no one will call kthread_stop() or return when
525  * 'kthread_should_stop()' is true.
526  */
svc_normal_to_secure_shm_thread(void * data)527 static int svc_normal_to_secure_shm_thread(void *data)
528 {
529 	struct stratix10_svc_sh_memory
530 			*sh_mem = (struct stratix10_svc_sh_memory *)data;
531 	struct arm_smccc_res res;
532 
533 	/* SMC or HVC call to get shared memory info from secure world */
534 	sh_mem->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM,
535 			  0, 0, 0, 0, 0, 0, 0, &res);
536 	if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
537 		sh_mem->addr = res.a1;
538 		sh_mem->size = res.a2;
539 	} else {
540 		pr_err("%s: after SMC call -- res.a0=0x%016x",  __func__,
541 		       (unsigned int)res.a0);
542 		sh_mem->addr = 0;
543 		sh_mem->size = 0;
544 	}
545 
546 	complete(&sh_mem->sync_complete);
547 	return 0;
548 }
549 
550 /**
551  * svc_get_sh_memory() - get memory block reserved by secure monitor SW
552  * @pdev: pointer to service layer device
553  * @sh_memory: pointer to service shared memory structure
554  *
555  * Return: zero for successfully getting the physical address of memory block
556  * reserved by secure monitor software, or negative value on error.
557  */
svc_get_sh_memory(struct platform_device * pdev,struct stratix10_svc_sh_memory * sh_memory)558 static int svc_get_sh_memory(struct platform_device *pdev,
559 				    struct stratix10_svc_sh_memory *sh_memory)
560 {
561 	struct device *dev = &pdev->dev;
562 	struct task_struct *sh_memory_task;
563 	unsigned int cpu = 0;
564 
565 	init_completion(&sh_memory->sync_complete);
566 
567 	/* smc or hvc call happens on cpu 0 bound kthread */
568 	sh_memory_task = kthread_create_on_node(svc_normal_to_secure_shm_thread,
569 					       (void *)sh_memory,
570 						cpu_to_node(cpu),
571 						"svc_smc_hvc_shm_thread");
572 	if (IS_ERR(sh_memory_task)) {
573 		dev_err(dev, "fail to create stratix10_svc_smc_shm_thread\n");
574 		return -EINVAL;
575 	}
576 
577 	wake_up_process(sh_memory_task);
578 
579 	if (!wait_for_completion_timeout(&sh_memory->sync_complete, 10 * HZ)) {
580 		dev_err(dev,
581 			"timeout to get sh-memory paras from secure world\n");
582 		return -ETIMEDOUT;
583 	}
584 
585 	if (!sh_memory->addr || !sh_memory->size) {
586 		dev_err(dev,
587 			"failed to get shared memory info from secure world\n");
588 		return -ENOMEM;
589 	}
590 
591 	dev_dbg(dev, "SM software provides paddr: 0x%016x, size: 0x%08x\n",
592 		(unsigned int)sh_memory->addr,
593 		(unsigned int)sh_memory->size);
594 
595 	return 0;
596 }
597 
598 /**
599  * svc_create_memory_pool() - create a memory pool from reserved memory block
600  * @pdev: pointer to service layer device
601  * @sh_memory: pointer to service shared memory structure
602  *
603  * Return: pool allocated from reserved memory block or ERR_PTR() on error.
604  */
605 static struct gen_pool *
svc_create_memory_pool(struct platform_device * pdev,struct stratix10_svc_sh_memory * sh_memory)606 svc_create_memory_pool(struct platform_device *pdev,
607 		       struct stratix10_svc_sh_memory *sh_memory)
608 {
609 	struct device *dev = &pdev->dev;
610 	struct gen_pool *genpool;
611 	unsigned long vaddr;
612 	phys_addr_t paddr;
613 	size_t size;
614 	phys_addr_t begin;
615 	phys_addr_t end;
616 	void *va;
617 	size_t page_mask = PAGE_SIZE - 1;
618 	int min_alloc_order = 3;
619 	int ret;
620 
621 	begin = roundup(sh_memory->addr, PAGE_SIZE);
622 	end = rounddown(sh_memory->addr + sh_memory->size, PAGE_SIZE);
623 	paddr = begin;
624 	size = end - begin;
625 	va = memremap(paddr, size, MEMREMAP_WC);
626 	if (!va) {
627 		dev_err(dev, "fail to remap shared memory\n");
628 		return ERR_PTR(-EINVAL);
629 	}
630 	vaddr = (unsigned long)va;
631 	dev_dbg(dev,
632 		"reserved memory vaddr: %p, paddr: 0x%16x size: 0x%8x\n",
633 		va, (unsigned int)paddr, (unsigned int)size);
634 	if ((vaddr & page_mask) || (paddr & page_mask) ||
635 	    (size & page_mask)) {
636 		dev_err(dev, "page is not aligned\n");
637 		return ERR_PTR(-EINVAL);
638 	}
639 	genpool = gen_pool_create(min_alloc_order, -1);
640 	if (!genpool) {
641 		dev_err(dev, "fail to create genpool\n");
642 		return ERR_PTR(-ENOMEM);
643 	}
644 	gen_pool_set_algo(genpool, gen_pool_best_fit, NULL);
645 	ret = gen_pool_add_virt(genpool, vaddr, paddr, size, -1);
646 	if (ret) {
647 		dev_err(dev, "fail to add memory chunk to the pool\n");
648 		gen_pool_destroy(genpool);
649 		return ERR_PTR(ret);
650 	}
651 
652 	return genpool;
653 }
654 
655 /**
656  * svc_smccc_smc() - secure monitor call between normal and secure world
657  * @a0: argument passed in registers 0
658  * @a1: argument passed in registers 1
659  * @a2: argument passed in registers 2
660  * @a3: argument passed in registers 3
661  * @a4: argument passed in registers 4
662  * @a5: argument passed in registers 5
663  * @a6: argument passed in registers 6
664  * @a7: argument passed in registers 7
665  * @res: result values from register 0 to 3
666  */
svc_smccc_smc(unsigned long a0,unsigned long a1,unsigned long a2,unsigned long a3,unsigned long a4,unsigned long a5,unsigned long a6,unsigned long a7,struct arm_smccc_res * res)667 static void svc_smccc_smc(unsigned long a0, unsigned long a1,
668 			  unsigned long a2, unsigned long a3,
669 			  unsigned long a4, unsigned long a5,
670 			  unsigned long a6, unsigned long a7,
671 			  struct arm_smccc_res *res)
672 {
673 	arm_smccc_smc(a0, a1, a2, a3, a4, a5, a6, a7, res);
674 }
675 
676 /**
677  * svc_smccc_hvc() - hypervisor call between normal and secure world
678  * @a0: argument passed in registers 0
679  * @a1: argument passed in registers 1
680  * @a2: argument passed in registers 2
681  * @a3: argument passed in registers 3
682  * @a4: argument passed in registers 4
683  * @a5: argument passed in registers 5
684  * @a6: argument passed in registers 6
685  * @a7: argument passed in registers 7
686  * @res: result values from register 0 to 3
687  */
svc_smccc_hvc(unsigned long a0,unsigned long a1,unsigned long a2,unsigned long a3,unsigned long a4,unsigned long a5,unsigned long a6,unsigned long a7,struct arm_smccc_res * res)688 static void svc_smccc_hvc(unsigned long a0, unsigned long a1,
689 			  unsigned long a2, unsigned long a3,
690 			  unsigned long a4, unsigned long a5,
691 			  unsigned long a6, unsigned long a7,
692 			  struct arm_smccc_res *res)
693 {
694 	arm_smccc_hvc(a0, a1, a2, a3, a4, a5, a6, a7, res);
695 }
696 
697 /**
698  * get_invoke_func() - invoke SMC or HVC call
699  * @dev: pointer to device
700  *
701  * Return: function pointer to svc_smccc_smc or svc_smccc_hvc.
702  */
get_invoke_func(struct device * dev)703 static svc_invoke_fn *get_invoke_func(struct device *dev)
704 {
705 	const char *method;
706 
707 	if (of_property_read_string(dev->of_node, "method", &method)) {
708 		dev_warn(dev, "missing \"method\" property\n");
709 		return ERR_PTR(-ENXIO);
710 	}
711 
712 	if (!strcmp(method, "smc"))
713 		return svc_smccc_smc;
714 	if (!strcmp(method, "hvc"))
715 		return svc_smccc_hvc;
716 
717 	dev_warn(dev, "invalid \"method\" property: %s\n", method);
718 
719 	return ERR_PTR(-EINVAL);
720 }
721 
722 /**
723  * stratix10_svc_request_channel_byname() - request a service channel
724  * @client: pointer to service client
725  * @name: service client name
726  *
727  * This function is used by service client to request a service channel.
728  *
729  * Return: a pointer to channel assigned to the client on success,
730  * or ERR_PTR() on error.
731  */
stratix10_svc_request_channel_byname(struct stratix10_svc_client * client,const char * name)732 struct stratix10_svc_chan *stratix10_svc_request_channel_byname(
733 	struct stratix10_svc_client *client, const char *name)
734 {
735 	struct device *dev = client->dev;
736 	struct stratix10_svc_controller *controller;
737 	struct stratix10_svc_chan *chan = NULL;
738 	unsigned long flag;
739 	int i;
740 
741 	/* if probe was called after client's, or error on probe */
742 	if (list_empty(&svc_ctrl))
743 		return ERR_PTR(-EPROBE_DEFER);
744 
745 	controller = list_first_entry(&svc_ctrl,
746 				      struct stratix10_svc_controller, node);
747 	for (i = 0; i < SVC_NUM_CHANNEL; i++) {
748 		if (!strcmp(controller->chans[i].name, name)) {
749 			chan = &controller->chans[i];
750 			break;
751 		}
752 	}
753 
754 	/* if there was no channel match */
755 	if (i == SVC_NUM_CHANNEL) {
756 		dev_err(dev, "%s: channel not allocated\n", __func__);
757 		return ERR_PTR(-EINVAL);
758 	}
759 
760 	if (chan->scl || !try_module_get(controller->dev->driver->owner)) {
761 		dev_dbg(dev, "%s: svc not free\n", __func__);
762 		return ERR_PTR(-EBUSY);
763 	}
764 
765 	spin_lock_irqsave(&chan->lock, flag);
766 	chan->scl = client;
767 	chan->ctrl->num_active_client++;
768 	spin_unlock_irqrestore(&chan->lock, flag);
769 
770 	return chan;
771 }
772 EXPORT_SYMBOL_GPL(stratix10_svc_request_channel_byname);
773 
774 /**
775  * stratix10_svc_free_channel() - free service channel
776  * @chan: service channel to be freed
777  *
778  * This function is used by service client to free a service channel.
779  */
stratix10_svc_free_channel(struct stratix10_svc_chan * chan)780 void stratix10_svc_free_channel(struct stratix10_svc_chan *chan)
781 {
782 	unsigned long flag;
783 
784 	spin_lock_irqsave(&chan->lock, flag);
785 	chan->scl = NULL;
786 	chan->ctrl->num_active_client--;
787 	module_put(chan->ctrl->dev->driver->owner);
788 	spin_unlock_irqrestore(&chan->lock, flag);
789 }
790 EXPORT_SYMBOL_GPL(stratix10_svc_free_channel);
791 
792 /**
793  * stratix10_svc_send() - send a message data to the remote
794  * @chan: service channel assigned to the client
795  * @msg: message data to be sent, in the format of
796  * "struct stratix10_svc_client_msg"
797  *
798  * This function is used by service client to add a message to the service
799  * layer driver's queue for being sent to the secure world.
800  *
801  * Return: 0 for success, -ENOMEM or -ENOBUFS on error.
802  */
stratix10_svc_send(struct stratix10_svc_chan * chan,void * msg)803 int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg)
804 {
805 	struct stratix10_svc_client_msg
806 		*p_msg = (struct stratix10_svc_client_msg *)msg;
807 	struct stratix10_svc_data_mem *p_mem;
808 	struct stratix10_svc_data *p_data;
809 	int ret = 0;
810 	unsigned int cpu = 0;
811 
812 	p_data = kzalloc(sizeof(*p_data), GFP_KERNEL);
813 	if (!p_data)
814 		return -ENOMEM;
815 
816 	/* first client will create kernel thread */
817 	if (!chan->ctrl->task) {
818 		chan->ctrl->task =
819 			kthread_create_on_node(svc_normal_to_secure_thread,
820 					      (void *)chan->ctrl,
821 					      cpu_to_node(cpu),
822 					      "svc_smc_hvc_thread");
823 			if (IS_ERR(chan->ctrl->task)) {
824 				dev_err(chan->ctrl->dev,
825 					"failed to create svc_smc_hvc_thread\n");
826 				kfree(p_data);
827 				return -EINVAL;
828 			}
829 		kthread_bind(chan->ctrl->task, cpu);
830 		wake_up_process(chan->ctrl->task);
831 	}
832 
833 	pr_debug("%s: sent P-va=%p, P-com=%x, P-size=%u\n", __func__,
834 		 p_msg->payload, p_msg->command,
835 		 (unsigned int)p_msg->payload_length);
836 
837 	if (list_empty(&svc_data_mem)) {
838 		if (p_msg->command == COMMAND_RECONFIG) {
839 			struct stratix10_svc_command_config_type *ct =
840 				(struct stratix10_svc_command_config_type *)
841 				p_msg->payload;
842 			p_data->flag = ct->flags;
843 		}
844 	} else {
845 		list_for_each_entry(p_mem, &svc_data_mem, node)
846 			if (p_mem->vaddr == p_msg->payload) {
847 				p_data->paddr = p_mem->paddr;
848 				break;
849 			}
850 	}
851 
852 	p_data->command = p_msg->command;
853 	p_data->arg[0] = p_msg->arg[0];
854 	p_data->arg[1] = p_msg->arg[1];
855 	p_data->arg[2] = p_msg->arg[2];
856 	p_data->size = p_msg->payload_length;
857 	p_data->chan = chan;
858 	pr_debug("%s: put to FIFO pa=0x%016x, cmd=%x, size=%u\n", __func__,
859 	       (unsigned int)p_data->paddr, p_data->command,
860 	       (unsigned int)p_data->size);
861 	ret = kfifo_in_spinlocked(&chan->ctrl->svc_fifo, p_data,
862 				  sizeof(*p_data),
863 				  &chan->ctrl->svc_fifo_lock);
864 
865 	kfree(p_data);
866 
867 	if (!ret)
868 		return -ENOBUFS;
869 
870 	return 0;
871 }
872 EXPORT_SYMBOL_GPL(stratix10_svc_send);
873 
874 /**
875  * stratix10_svc_done() - complete service request transactions
876  * @chan: service channel assigned to the client
877  *
878  * This function should be called when client has finished its request
879  * or there is an error in the request process. It allows the service layer
880  * to stop the running thread to have maximize savings in kernel resources.
881  */
stratix10_svc_done(struct stratix10_svc_chan * chan)882 void stratix10_svc_done(struct stratix10_svc_chan *chan)
883 {
884 	/* stop thread when thread is running AND only one active client */
885 	if (chan->ctrl->task && chan->ctrl->num_active_client <= 1) {
886 		pr_debug("svc_smc_hvc_shm_thread is stopped\n");
887 		kthread_stop(chan->ctrl->task);
888 		chan->ctrl->task = NULL;
889 	}
890 }
891 EXPORT_SYMBOL_GPL(stratix10_svc_done);
892 
893 /**
894  * stratix10_svc_allocate_memory() - allocate memory
895  * @chan: service channel assigned to the client
896  * @size: memory size requested by a specific service client
897  *
898  * Service layer allocates the requested number of bytes buffer from the
899  * memory pool, service client uses this function to get allocated buffers.
900  *
901  * Return: address of allocated memory on success, or ERR_PTR() on error.
902  */
stratix10_svc_allocate_memory(struct stratix10_svc_chan * chan,size_t size)903 void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan,
904 				    size_t size)
905 {
906 	struct stratix10_svc_data_mem *pmem;
907 	unsigned long va;
908 	phys_addr_t pa;
909 	struct gen_pool *genpool = chan->ctrl->genpool;
910 	size_t s = roundup(size, 1 << genpool->min_alloc_order);
911 
912 	pmem = devm_kzalloc(chan->ctrl->dev, sizeof(*pmem), GFP_KERNEL);
913 	if (!pmem)
914 		return ERR_PTR(-ENOMEM);
915 
916 	va = gen_pool_alloc(genpool, s);
917 	if (!va)
918 		return ERR_PTR(-ENOMEM);
919 
920 	memset((void *)va, 0, s);
921 	pa = gen_pool_virt_to_phys(genpool, va);
922 
923 	pmem->vaddr = (void *)va;
924 	pmem->paddr = pa;
925 	pmem->size = s;
926 	list_add_tail(&pmem->node, &svc_data_mem);
927 	pr_debug("%s: va=%p, pa=0x%016x\n", __func__,
928 		 pmem->vaddr, (unsigned int)pmem->paddr);
929 
930 	return (void *)va;
931 }
932 EXPORT_SYMBOL_GPL(stratix10_svc_allocate_memory);
933 
934 /**
935  * stratix10_svc_free_memory() - free allocated memory
936  * @chan: service channel assigned to the client
937  * @kaddr: memory to be freed
938  *
939  * This function is used by service client to free allocated buffers.
940  */
stratix10_svc_free_memory(struct stratix10_svc_chan * chan,void * kaddr)941 void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr)
942 {
943 	struct stratix10_svc_data_mem *pmem;
944 	size_t size = 0;
945 
946 	list_for_each_entry(pmem, &svc_data_mem, node)
947 		if (pmem->vaddr == kaddr) {
948 			size = pmem->size;
949 			break;
950 		}
951 
952 	gen_pool_free(chan->ctrl->genpool, (unsigned long)kaddr, size);
953 	pmem->vaddr = NULL;
954 	list_del(&pmem->node);
955 }
956 EXPORT_SYMBOL_GPL(stratix10_svc_free_memory);
957 
958 static const struct of_device_id stratix10_svc_drv_match[] = {
959 	{.compatible = "intel,stratix10-svc"},
960 	{.compatible = "intel,agilex-svc"},
961 	{},
962 };
963 
stratix10_svc_drv_probe(struct platform_device * pdev)964 static int stratix10_svc_drv_probe(struct platform_device *pdev)
965 {
966 	struct device *dev = &pdev->dev;
967 	struct stratix10_svc_controller *controller;
968 	struct stratix10_svc_chan *chans;
969 	struct gen_pool *genpool;
970 	struct stratix10_svc_sh_memory *sh_memory;
971 	struct stratix10_svc *svc;
972 
973 	svc_invoke_fn *invoke_fn;
974 	size_t fifo_size;
975 	int ret;
976 
977 	/* get SMC or HVC function */
978 	invoke_fn = get_invoke_func(dev);
979 	if (IS_ERR(invoke_fn))
980 		return -EINVAL;
981 
982 	sh_memory = devm_kzalloc(dev, sizeof(*sh_memory), GFP_KERNEL);
983 	if (!sh_memory)
984 		return -ENOMEM;
985 
986 	sh_memory->invoke_fn = invoke_fn;
987 	ret = svc_get_sh_memory(pdev, sh_memory);
988 	if (ret)
989 		return ret;
990 
991 	genpool = svc_create_memory_pool(pdev, sh_memory);
992 	if (!genpool)
993 		return -ENOMEM;
994 
995 	/* allocate service controller and supporting channel */
996 	controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
997 	if (!controller)
998 		return -ENOMEM;
999 
1000 	chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL,
1001 				   sizeof(*chans), GFP_KERNEL | __GFP_ZERO);
1002 	if (!chans)
1003 		return -ENOMEM;
1004 
1005 	controller->dev = dev;
1006 	controller->num_chans = SVC_NUM_CHANNEL;
1007 	controller->num_active_client = 0;
1008 	controller->chans = chans;
1009 	controller->genpool = genpool;
1010 	controller->task = NULL;
1011 	controller->invoke_fn = invoke_fn;
1012 	init_completion(&controller->complete_status);
1013 
1014 	fifo_size = sizeof(struct stratix10_svc_data) * SVC_NUM_DATA_IN_FIFO;
1015 	ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL);
1016 	if (ret) {
1017 		dev_err(dev, "failed to allocate FIFO\n");
1018 		return ret;
1019 	}
1020 	spin_lock_init(&controller->svc_fifo_lock);
1021 
1022 	chans[0].scl = NULL;
1023 	chans[0].ctrl = controller;
1024 	chans[0].name = SVC_CLIENT_FPGA;
1025 	spin_lock_init(&chans[0].lock);
1026 
1027 	chans[1].scl = NULL;
1028 	chans[1].ctrl = controller;
1029 	chans[1].name = SVC_CLIENT_RSU;
1030 	spin_lock_init(&chans[1].lock);
1031 
1032 	list_add_tail(&controller->node, &svc_ctrl);
1033 	platform_set_drvdata(pdev, controller);
1034 
1035 	/* add svc client device(s) */
1036 	svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL);
1037 	if (!svc) {
1038 		ret = -ENOMEM;
1039 		goto err_free_kfifo;
1040 	}
1041 
1042 	svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0);
1043 	if (!svc->stratix10_svc_rsu) {
1044 		dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU);
1045 		ret = -ENOMEM;
1046 		goto err_free_kfifo;
1047 	}
1048 
1049 	ret = platform_device_add(svc->stratix10_svc_rsu);
1050 	if (ret)
1051 		goto err_put_device;
1052 
1053 	dev_set_drvdata(dev, svc);
1054 
1055 	pr_info("Intel Service Layer Driver Initialized\n");
1056 
1057 	return 0;
1058 
1059 err_put_device:
1060 	platform_device_put(svc->stratix10_svc_rsu);
1061 err_free_kfifo:
1062 	kfifo_free(&controller->svc_fifo);
1063 	return ret;
1064 }
1065 
stratix10_svc_drv_remove(struct platform_device * pdev)1066 static int stratix10_svc_drv_remove(struct platform_device *pdev)
1067 {
1068 	struct stratix10_svc *svc = dev_get_drvdata(&pdev->dev);
1069 	struct stratix10_svc_controller *ctrl = platform_get_drvdata(pdev);
1070 
1071 	platform_device_unregister(svc->stratix10_svc_rsu);
1072 
1073 	kfifo_free(&ctrl->svc_fifo);
1074 	if (ctrl->task) {
1075 		kthread_stop(ctrl->task);
1076 		ctrl->task = NULL;
1077 	}
1078 	if (ctrl->genpool)
1079 		gen_pool_destroy(ctrl->genpool);
1080 	list_del(&ctrl->node);
1081 
1082 	return 0;
1083 }
1084 
1085 static struct platform_driver stratix10_svc_driver = {
1086 	.probe = stratix10_svc_drv_probe,
1087 	.remove = stratix10_svc_drv_remove,
1088 	.driver = {
1089 		.name = "stratix10-svc",
1090 		.of_match_table = stratix10_svc_drv_match,
1091 	},
1092 };
1093 
stratix10_svc_init(void)1094 static int __init stratix10_svc_init(void)
1095 {
1096 	struct device_node *fw_np;
1097 	struct device_node *np;
1098 	int ret;
1099 
1100 	fw_np = of_find_node_by_name(NULL, "firmware");
1101 	if (!fw_np)
1102 		return -ENODEV;
1103 
1104 	np = of_find_matching_node(fw_np, stratix10_svc_drv_match);
1105 	if (!np)
1106 		return -ENODEV;
1107 
1108 	of_node_put(np);
1109 	ret = of_platform_populate(fw_np, stratix10_svc_drv_match, NULL, NULL);
1110 	if (ret)
1111 		return ret;
1112 
1113 	return platform_driver_register(&stratix10_svc_driver);
1114 }
1115 
stratix10_svc_exit(void)1116 static void __exit stratix10_svc_exit(void)
1117 {
1118 	return platform_driver_unregister(&stratix10_svc_driver);
1119 }
1120 
1121 subsys_initcall(stratix10_svc_init);
1122 module_exit(stratix10_svc_exit);
1123 
1124 MODULE_LICENSE("GPL v2");
1125 MODULE_DESCRIPTION("Intel Stratix10 Service Layer Driver");
1126 MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>");
1127 MODULE_ALIAS("platform:stratix10-svc");
1128