1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2012 Red Hat
4 *
5 * based in parts on udlfb.c:
6 * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it>
7 * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com>
8 * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com>
9 */
10
11 #include <drm/drm_atomic_helper.h>
12 #include <drm/drm_crtc_helper.h>
13 #include <drm/drm_damage_helper.h>
14 #include <drm/drm_fourcc.h>
15 #include <drm/drm_gem_atomic_helper.h>
16 #include <drm/drm_gem_framebuffer_helper.h>
17 #include <drm/drm_gem_shmem_helper.h>
18 #include <drm/drm_modeset_helper_vtables.h>
19 #include <drm/drm_vblank.h>
20
21 #include "udl_drv.h"
22
23 #define UDL_COLOR_DEPTH_16BPP 0
24
25 /*
26 * All DisplayLink bulk operations start with 0xAF, followed by specific code
27 * All operations are written to buffers which then later get sent to device
28 */
udl_set_register(char * buf,u8 reg,u8 val)29 static char *udl_set_register(char *buf, u8 reg, u8 val)
30 {
31 *buf++ = 0xAF;
32 *buf++ = 0x20;
33 *buf++ = reg;
34 *buf++ = val;
35 return buf;
36 }
37
udl_vidreg_lock(char * buf)38 static char *udl_vidreg_lock(char *buf)
39 {
40 return udl_set_register(buf, 0xFF, 0x00);
41 }
42
udl_vidreg_unlock(char * buf)43 static char *udl_vidreg_unlock(char *buf)
44 {
45 return udl_set_register(buf, 0xFF, 0xFF);
46 }
47
udl_set_blank_mode(char * buf,u8 mode)48 static char *udl_set_blank_mode(char *buf, u8 mode)
49 {
50 return udl_set_register(buf, UDL_REG_BLANK_MODE, mode);
51 }
52
udl_set_color_depth(char * buf,u8 selection)53 static char *udl_set_color_depth(char *buf, u8 selection)
54 {
55 return udl_set_register(buf, 0x00, selection);
56 }
57
udl_set_base16bpp(char * wrptr,u32 base)58 static char *udl_set_base16bpp(char *wrptr, u32 base)
59 {
60 /* the base pointer is 16 bits wide, 0x20 is hi byte. */
61 wrptr = udl_set_register(wrptr, 0x20, base >> 16);
62 wrptr = udl_set_register(wrptr, 0x21, base >> 8);
63 return udl_set_register(wrptr, 0x22, base);
64 }
65
66 /*
67 * DisplayLink HW has separate 16bpp and 8bpp framebuffers.
68 * In 24bpp modes, the low 323 RGB bits go in the 8bpp framebuffer
69 */
udl_set_base8bpp(char * wrptr,u32 base)70 static char *udl_set_base8bpp(char *wrptr, u32 base)
71 {
72 wrptr = udl_set_register(wrptr, 0x26, base >> 16);
73 wrptr = udl_set_register(wrptr, 0x27, base >> 8);
74 return udl_set_register(wrptr, 0x28, base);
75 }
76
udl_set_register_16(char * wrptr,u8 reg,u16 value)77 static char *udl_set_register_16(char *wrptr, u8 reg, u16 value)
78 {
79 wrptr = udl_set_register(wrptr, reg, value >> 8);
80 return udl_set_register(wrptr, reg+1, value);
81 }
82
83 /*
84 * This is kind of weird because the controller takes some
85 * register values in a different byte order than other registers.
86 */
udl_set_register_16be(char * wrptr,u8 reg,u16 value)87 static char *udl_set_register_16be(char *wrptr, u8 reg, u16 value)
88 {
89 wrptr = udl_set_register(wrptr, reg, value);
90 return udl_set_register(wrptr, reg+1, value >> 8);
91 }
92
93 /*
94 * LFSR is linear feedback shift register. The reason we have this is
95 * because the display controller needs to minimize the clock depth of
96 * various counters used in the display path. So this code reverses the
97 * provided value into the lfsr16 value by counting backwards to get
98 * the value that needs to be set in the hardware comparator to get the
99 * same actual count. This makes sense once you read above a couple of
100 * times and think about it from a hardware perspective.
101 */
udl_lfsr16(u16 actual_count)102 static u16 udl_lfsr16(u16 actual_count)
103 {
104 u32 lv = 0xFFFF; /* This is the lfsr value that the hw starts with */
105
106 while (actual_count--) {
107 lv = ((lv << 1) |
108 (((lv >> 15) ^ (lv >> 4) ^ (lv >> 2) ^ (lv >> 1)) & 1))
109 & 0xFFFF;
110 }
111
112 return (u16) lv;
113 }
114
115 /*
116 * This does LFSR conversion on the value that is to be written.
117 * See LFSR explanation above for more detail.
118 */
udl_set_register_lfsr16(char * wrptr,u8 reg,u16 value)119 static char *udl_set_register_lfsr16(char *wrptr, u8 reg, u16 value)
120 {
121 return udl_set_register_16(wrptr, reg, udl_lfsr16(value));
122 }
123
124 /*
125 * This takes a standard fbdev screeninfo struct and all of its monitor mode
126 * details and converts them into the DisplayLink equivalent register commands.
127 ERR(vreg(dev, 0x00, (color_depth == 16) ? 0 : 1));
128 ERR(vreg_lfsr16(dev, 0x01, xDisplayStart));
129 ERR(vreg_lfsr16(dev, 0x03, xDisplayEnd));
130 ERR(vreg_lfsr16(dev, 0x05, yDisplayStart));
131 ERR(vreg_lfsr16(dev, 0x07, yDisplayEnd));
132 ERR(vreg_lfsr16(dev, 0x09, xEndCount));
133 ERR(vreg_lfsr16(dev, 0x0B, hSyncStart));
134 ERR(vreg_lfsr16(dev, 0x0D, hSyncEnd));
135 ERR(vreg_big_endian(dev, 0x0F, hPixels));
136 ERR(vreg_lfsr16(dev, 0x11, yEndCount));
137 ERR(vreg_lfsr16(dev, 0x13, vSyncStart));
138 ERR(vreg_lfsr16(dev, 0x15, vSyncEnd));
139 ERR(vreg_big_endian(dev, 0x17, vPixels));
140 ERR(vreg_little_endian(dev, 0x1B, pixelClock5KHz));
141
142 ERR(vreg(dev, 0x1F, 0));
143
144 ERR(vbuf(dev, WRITE_VIDREG_UNLOCK, DSIZEOF(WRITE_VIDREG_UNLOCK)));
145 */
udl_set_vid_cmds(char * wrptr,struct drm_display_mode * mode)146 static char *udl_set_vid_cmds(char *wrptr, struct drm_display_mode *mode)
147 {
148 u16 xds, yds;
149 u16 xde, yde;
150 u16 yec;
151
152 /* x display start */
153 xds = mode->crtc_htotal - mode->crtc_hsync_start;
154 wrptr = udl_set_register_lfsr16(wrptr, 0x01, xds);
155 /* x display end */
156 xde = xds + mode->crtc_hdisplay;
157 wrptr = udl_set_register_lfsr16(wrptr, 0x03, xde);
158
159 /* y display start */
160 yds = mode->crtc_vtotal - mode->crtc_vsync_start;
161 wrptr = udl_set_register_lfsr16(wrptr, 0x05, yds);
162 /* y display end */
163 yde = yds + mode->crtc_vdisplay;
164 wrptr = udl_set_register_lfsr16(wrptr, 0x07, yde);
165
166 /* x end count is active + blanking - 1 */
167 wrptr = udl_set_register_lfsr16(wrptr, 0x09,
168 mode->crtc_htotal - 1);
169
170 /* libdlo hardcodes hsync start to 1 */
171 wrptr = udl_set_register_lfsr16(wrptr, 0x0B, 1);
172
173 /* hsync end is width of sync pulse + 1 */
174 wrptr = udl_set_register_lfsr16(wrptr, 0x0D,
175 mode->crtc_hsync_end - mode->crtc_hsync_start + 1);
176
177 /* hpixels is active pixels */
178 wrptr = udl_set_register_16(wrptr, 0x0F, mode->hdisplay);
179
180 /* yendcount is vertical active + vertical blanking */
181 yec = mode->crtc_vtotal;
182 wrptr = udl_set_register_lfsr16(wrptr, 0x11, yec);
183
184 /* libdlo hardcodes vsync start to 0 */
185 wrptr = udl_set_register_lfsr16(wrptr, 0x13, 0);
186
187 /* vsync end is width of vsync pulse */
188 wrptr = udl_set_register_lfsr16(wrptr, 0x15, mode->crtc_vsync_end - mode->crtc_vsync_start);
189
190 /* vpixels is active pixels */
191 wrptr = udl_set_register_16(wrptr, 0x17, mode->crtc_vdisplay);
192
193 wrptr = udl_set_register_16be(wrptr, 0x1B,
194 mode->clock / 5);
195
196 return wrptr;
197 }
198
udl_dummy_render(char * wrptr)199 static char *udl_dummy_render(char *wrptr)
200 {
201 *wrptr++ = 0xAF;
202 *wrptr++ = 0x6A; /* copy */
203 *wrptr++ = 0x00; /* from addr */
204 *wrptr++ = 0x00;
205 *wrptr++ = 0x00;
206 *wrptr++ = 0x01; /* one pixel */
207 *wrptr++ = 0x00; /* to address */
208 *wrptr++ = 0x00;
209 *wrptr++ = 0x00;
210 return wrptr;
211 }
212
udl_crtc_write_mode_to_hw(struct drm_crtc * crtc)213 static int udl_crtc_write_mode_to_hw(struct drm_crtc *crtc)
214 {
215 struct drm_device *dev = crtc->dev;
216 struct udl_device *udl = to_udl(dev);
217 struct urb *urb;
218 char *buf;
219 int retval;
220
221 if (udl->mode_buf_len == 0) {
222 DRM_ERROR("No mode set\n");
223 return -EINVAL;
224 }
225
226 urb = udl_get_urb(dev);
227 if (!urb)
228 return -ENOMEM;
229
230 buf = (char *)urb->transfer_buffer;
231
232 memcpy(buf, udl->mode_buf, udl->mode_buf_len);
233 retval = udl_submit_urb(dev, urb, udl->mode_buf_len);
234 DRM_DEBUG("write mode info %d\n", udl->mode_buf_len);
235 return retval;
236 }
237
udl_log_cpp(unsigned int cpp)238 static long udl_log_cpp(unsigned int cpp)
239 {
240 if (WARN_ON(!is_power_of_2(cpp)))
241 return -EINVAL;
242 return __ffs(cpp);
243 }
244
udl_aligned_damage_clip(struct drm_rect * clip,int x,int y,int width,int height)245 static int udl_aligned_damage_clip(struct drm_rect *clip, int x, int y,
246 int width, int height)
247 {
248 int x1, x2;
249
250 if (WARN_ON_ONCE(x < 0) ||
251 WARN_ON_ONCE(y < 0) ||
252 WARN_ON_ONCE(width < 0) ||
253 WARN_ON_ONCE(height < 0))
254 return -EINVAL;
255
256 x1 = ALIGN_DOWN(x, sizeof(unsigned long));
257 x2 = ALIGN(width + (x - x1), sizeof(unsigned long)) + x1;
258
259 clip->x1 = x1;
260 clip->y1 = y;
261 clip->x2 = x2;
262 clip->y2 = y + height;
263
264 return 0;
265 }
266
udl_handle_damage(struct drm_framebuffer * fb,const struct dma_buf_map * map,int x,int y,int width,int height)267 static int udl_handle_damage(struct drm_framebuffer *fb, const struct dma_buf_map *map,
268 int x, int y, int width, int height)
269 {
270 struct drm_device *dev = fb->dev;
271 void *vaddr = map->vaddr; /* TODO: Use mapping abstraction properly */
272 int i, ret;
273 char *cmd;
274 struct urb *urb;
275 struct drm_rect clip;
276 int log_bpp;
277
278 ret = udl_log_cpp(fb->format->cpp[0]);
279 if (ret < 0)
280 return ret;
281 log_bpp = ret;
282
283 ret = udl_aligned_damage_clip(&clip, x, y, width, height);
284 if (ret)
285 return ret;
286 else if ((clip.x2 > fb->width) || (clip.y2 > fb->height))
287 return -EINVAL;
288
289 ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE);
290 if (ret)
291 return ret;
292
293 urb = udl_get_urb(dev);
294 if (!urb) {
295 ret = -ENOMEM;
296 goto out_drm_gem_fb_end_cpu_access;
297 }
298 cmd = urb->transfer_buffer;
299
300 for (i = clip.y1; i < clip.y2; i++) {
301 const int line_offset = fb->pitches[0] * i;
302 const int byte_offset = line_offset + (clip.x1 << log_bpp);
303 const int dev_byte_offset = (fb->width * i + clip.x1) << log_bpp;
304 const int byte_width = (clip.x2 - clip.x1) << log_bpp;
305 ret = udl_render_hline(dev, log_bpp, &urb, (char *)vaddr,
306 &cmd, byte_offset, dev_byte_offset,
307 byte_width);
308 if (ret)
309 goto out_drm_gem_fb_end_cpu_access;
310 }
311
312 if (cmd > (char *)urb->transfer_buffer) {
313 /* Send partial buffer remaining before exiting */
314 int len;
315 if (cmd < (char *)urb->transfer_buffer + urb->transfer_buffer_length)
316 *cmd++ = 0xAF;
317 len = cmd - (char *)urb->transfer_buffer;
318 ret = udl_submit_urb(dev, urb, len);
319 } else {
320 udl_urb_completion(urb);
321 }
322
323 ret = 0;
324
325 out_drm_gem_fb_end_cpu_access:
326 drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
327 return ret;
328 }
329
330 /*
331 * Simple display pipeline
332 */
333
334 static const uint32_t udl_simple_display_pipe_formats[] = {
335 DRM_FORMAT_RGB565,
336 DRM_FORMAT_XRGB8888,
337 };
338
339 static enum drm_mode_status
udl_simple_display_pipe_mode_valid(struct drm_simple_display_pipe * pipe,const struct drm_display_mode * mode)340 udl_simple_display_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
341 const struct drm_display_mode *mode)
342 {
343 return MODE_OK;
344 }
345
346 static void
udl_simple_display_pipe_enable(struct drm_simple_display_pipe * pipe,struct drm_crtc_state * crtc_state,struct drm_plane_state * plane_state)347 udl_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
348 struct drm_crtc_state *crtc_state,
349 struct drm_plane_state *plane_state)
350 {
351 struct drm_crtc *crtc = &pipe->crtc;
352 struct drm_device *dev = crtc->dev;
353 struct drm_framebuffer *fb = plane_state->fb;
354 struct udl_device *udl = to_udl(dev);
355 struct drm_display_mode *mode = &crtc_state->mode;
356 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
357 char *buf;
358 char *wrptr;
359 int color_depth = UDL_COLOR_DEPTH_16BPP;
360
361 buf = (char *)udl->mode_buf;
362
363 /* This first section has to do with setting the base address on the
364 * controller associated with the display. There are 2 base
365 * pointers, currently, we only use the 16 bpp segment.
366 */
367 wrptr = udl_vidreg_lock(buf);
368 wrptr = udl_set_color_depth(wrptr, color_depth);
369 /* set base for 16bpp segment to 0 */
370 wrptr = udl_set_base16bpp(wrptr, 0);
371 /* set base for 8bpp segment to end of fb */
372 wrptr = udl_set_base8bpp(wrptr, 2 * mode->vdisplay * mode->hdisplay);
373
374 wrptr = udl_set_vid_cmds(wrptr, mode);
375 wrptr = udl_set_blank_mode(wrptr, UDL_BLANK_MODE_ON);
376 wrptr = udl_vidreg_unlock(wrptr);
377
378 wrptr = udl_dummy_render(wrptr);
379
380 udl->mode_buf_len = wrptr - buf;
381
382 udl_handle_damage(fb, &shadow_plane_state->data[0], 0, 0, fb->width, fb->height);
383
384 if (!crtc_state->mode_changed)
385 return;
386
387 /* enable display */
388 udl_crtc_write_mode_to_hw(crtc);
389 }
390
391 static void
udl_simple_display_pipe_disable(struct drm_simple_display_pipe * pipe)392 udl_simple_display_pipe_disable(struct drm_simple_display_pipe *pipe)
393 {
394 struct drm_crtc *crtc = &pipe->crtc;
395 struct drm_device *dev = crtc->dev;
396 struct urb *urb;
397 char *buf;
398
399 urb = udl_get_urb(dev);
400 if (!urb)
401 return;
402
403 buf = (char *)urb->transfer_buffer;
404 buf = udl_vidreg_lock(buf);
405 buf = udl_set_blank_mode(buf, UDL_BLANK_MODE_POWERDOWN);
406 buf = udl_vidreg_unlock(buf);
407 buf = udl_dummy_render(buf);
408
409 udl_submit_urb(dev, urb, buf - (char *)urb->transfer_buffer);
410 }
411
412 static void
udl_simple_display_pipe_update(struct drm_simple_display_pipe * pipe,struct drm_plane_state * old_plane_state)413 udl_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
414 struct drm_plane_state *old_plane_state)
415 {
416 struct drm_plane_state *state = pipe->plane.state;
417 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state);
418 struct drm_framebuffer *fb = state->fb;
419 struct drm_rect rect;
420
421 if (!fb)
422 return;
423
424 if (drm_atomic_helper_damage_merged(old_plane_state, state, &rect))
425 udl_handle_damage(fb, &shadow_plane_state->data[0], rect.x1, rect.y1,
426 rect.x2 - rect.x1, rect.y2 - rect.y1);
427 }
428
429 static const struct drm_simple_display_pipe_funcs udl_simple_display_pipe_funcs = {
430 .mode_valid = udl_simple_display_pipe_mode_valid,
431 .enable = udl_simple_display_pipe_enable,
432 .disable = udl_simple_display_pipe_disable,
433 .update = udl_simple_display_pipe_update,
434 DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS,
435 };
436
437 /*
438 * Modesetting
439 */
440
441 static const struct drm_mode_config_funcs udl_mode_funcs = {
442 .fb_create = drm_gem_fb_create_with_dirty,
443 .atomic_check = drm_atomic_helper_check,
444 .atomic_commit = drm_atomic_helper_commit,
445 };
446
udl_modeset_init(struct drm_device * dev)447 int udl_modeset_init(struct drm_device *dev)
448 {
449 size_t format_count = ARRAY_SIZE(udl_simple_display_pipe_formats);
450 struct udl_device *udl = to_udl(dev);
451 struct drm_connector *connector;
452 int ret;
453
454 ret = drmm_mode_config_init(dev);
455 if (ret)
456 return ret;
457
458 dev->mode_config.min_width = 640;
459 dev->mode_config.min_height = 480;
460
461 dev->mode_config.max_width = 2048;
462 dev->mode_config.max_height = 2048;
463
464 dev->mode_config.prefer_shadow = 0;
465 dev->mode_config.preferred_depth = 16;
466
467 dev->mode_config.funcs = &udl_mode_funcs;
468
469 connector = udl_connector_init(dev);
470 if (IS_ERR(connector))
471 return PTR_ERR(connector);
472
473 format_count = ARRAY_SIZE(udl_simple_display_pipe_formats);
474
475 ret = drm_simple_display_pipe_init(dev, &udl->display_pipe,
476 &udl_simple_display_pipe_funcs,
477 udl_simple_display_pipe_formats,
478 format_count, NULL, connector);
479 if (ret)
480 return ret;
481
482 drm_mode_config_reset(dev);
483
484 return 0;
485 }
486