1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * wm831x-auxadc.c -- AUXADC for Wolfson WM831x PMICs
4 *
5 * Copyright 2009-2011 Wolfson Microelectronics PLC.
6 *
7 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
8 */
9
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/delay.h>
13 #include <linux/mfd/core.h>
14 #include <linux/slab.h>
15 #include <linux/list.h>
16
17 #include <linux/mfd/wm831x/core.h>
18 #include <linux/mfd/wm831x/pdata.h>
19 #include <linux/mfd/wm831x/irq.h>
20 #include <linux/mfd/wm831x/auxadc.h>
21 #include <linux/mfd/wm831x/otp.h>
22 #include <linux/mfd/wm831x/regulator.h>
23
24 struct wm831x_auxadc_req {
25 struct list_head list;
26 enum wm831x_auxadc input;
27 int val;
28 struct completion done;
29 };
30
wm831x_auxadc_read_irq(struct wm831x * wm831x,enum wm831x_auxadc input)31 static int wm831x_auxadc_read_irq(struct wm831x *wm831x,
32 enum wm831x_auxadc input)
33 {
34 struct wm831x_auxadc_req *req;
35 int ret;
36 bool ena = false;
37
38 req = kzalloc(sizeof(*req), GFP_KERNEL);
39 if (!req)
40 return -ENOMEM;
41
42 init_completion(&req->done);
43 req->input = input;
44 req->val = -ETIMEDOUT;
45
46 mutex_lock(&wm831x->auxadc_lock);
47
48 /* Enqueue the request */
49 list_add(&req->list, &wm831x->auxadc_pending);
50
51 ena = !wm831x->auxadc_active;
52
53 if (ena) {
54 ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
55 WM831X_AUX_ENA, WM831X_AUX_ENA);
56 if (ret != 0) {
57 dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n",
58 ret);
59 goto out;
60 }
61 }
62
63 /* Enable the conversion if not already running */
64 if (!(wm831x->auxadc_active & (1 << input))) {
65 ret = wm831x_set_bits(wm831x, WM831X_AUXADC_SOURCE,
66 1 << input, 1 << input);
67 if (ret != 0) {
68 dev_err(wm831x->dev,
69 "Failed to set AUXADC source: %d\n", ret);
70 goto out;
71 }
72
73 wm831x->auxadc_active |= 1 << input;
74 }
75
76 /* We convert at the fastest rate possible */
77 if (ena) {
78 ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
79 WM831X_AUX_CVT_ENA |
80 WM831X_AUX_RATE_MASK,
81 WM831X_AUX_CVT_ENA |
82 WM831X_AUX_RATE_MASK);
83 if (ret != 0) {
84 dev_err(wm831x->dev, "Failed to start AUXADC: %d\n",
85 ret);
86 goto out;
87 }
88 }
89
90 mutex_unlock(&wm831x->auxadc_lock);
91
92 /* Wait for an interrupt */
93 wait_for_completion_timeout(&req->done, msecs_to_jiffies(500));
94
95 mutex_lock(&wm831x->auxadc_lock);
96 ret = req->val;
97
98 out:
99 list_del(&req->list);
100 mutex_unlock(&wm831x->auxadc_lock);
101
102 kfree(req);
103
104 return ret;
105 }
106
wm831x_auxadc_irq(int irq,void * irq_data)107 static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
108 {
109 struct wm831x *wm831x = irq_data;
110 struct wm831x_auxadc_req *req;
111 int ret, input, val;
112
113 ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
114 if (ret < 0) {
115 dev_err(wm831x->dev,
116 "Failed to read AUXADC data: %d\n", ret);
117 return IRQ_NONE;
118 }
119
120 input = ((ret & WM831X_AUX_DATA_SRC_MASK)
121 >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
122
123 if (input == 14)
124 input = WM831X_AUX_CAL;
125
126 val = ret & WM831X_AUX_DATA_MASK;
127
128 mutex_lock(&wm831x->auxadc_lock);
129
130 /* Disable this conversion, we're about to complete all users */
131 wm831x_set_bits(wm831x, WM831X_AUXADC_SOURCE,
132 1 << input, 0);
133 wm831x->auxadc_active &= ~(1 << input);
134
135 /* Turn off the entire convertor if idle */
136 if (!wm831x->auxadc_active)
137 wm831x_reg_write(wm831x, WM831X_AUXADC_CONTROL, 0);
138
139 /* Wake up any threads waiting for this request */
140 list_for_each_entry(req, &wm831x->auxadc_pending, list) {
141 if (req->input == input) {
142 req->val = val;
143 complete(&req->done);
144 }
145 }
146
147 mutex_unlock(&wm831x->auxadc_lock);
148
149 return IRQ_HANDLED;
150 }
151
wm831x_auxadc_read_polled(struct wm831x * wm831x,enum wm831x_auxadc input)152 static int wm831x_auxadc_read_polled(struct wm831x *wm831x,
153 enum wm831x_auxadc input)
154 {
155 int ret, src, timeout;
156
157 mutex_lock(&wm831x->auxadc_lock);
158
159 ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
160 WM831X_AUX_ENA, WM831X_AUX_ENA);
161 if (ret < 0) {
162 dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
163 goto out;
164 }
165
166 /* We force a single source at present */
167 src = input;
168 ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
169 1 << src);
170 if (ret < 0) {
171 dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
172 goto out;
173 }
174
175 ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
176 WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
177 if (ret < 0) {
178 dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
179 goto disable;
180 }
181
182 /* If we're not using interrupts then poll the
183 * interrupt status register */
184 timeout = 5;
185 while (timeout) {
186 msleep(1);
187
188 ret = wm831x_reg_read(wm831x,
189 WM831X_INTERRUPT_STATUS_1);
190 if (ret < 0) {
191 dev_err(wm831x->dev,
192 "ISR 1 read failed: %d\n", ret);
193 goto disable;
194 }
195
196 /* Did it complete? */
197 if (ret & WM831X_AUXADC_DATA_EINT) {
198 wm831x_reg_write(wm831x,
199 WM831X_INTERRUPT_STATUS_1,
200 WM831X_AUXADC_DATA_EINT);
201 break;
202 } else {
203 dev_err(wm831x->dev,
204 "AUXADC conversion timeout\n");
205 ret = -EBUSY;
206 goto disable;
207 }
208 }
209
210 ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
211 if (ret < 0) {
212 dev_err(wm831x->dev,
213 "Failed to read AUXADC data: %d\n", ret);
214 goto disable;
215 }
216
217 src = ((ret & WM831X_AUX_DATA_SRC_MASK)
218 >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
219
220 if (src == 14)
221 src = WM831X_AUX_CAL;
222
223 if (src != input) {
224 dev_err(wm831x->dev, "Data from source %d not %d\n",
225 src, input);
226 ret = -EINVAL;
227 } else {
228 ret &= WM831X_AUX_DATA_MASK;
229 }
230
231 disable:
232 wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
233 out:
234 mutex_unlock(&wm831x->auxadc_lock);
235 return ret;
236 }
237
238 /**
239 * wm831x_auxadc_read: Read a value from the WM831x AUXADC
240 *
241 * @wm831x: Device to read from.
242 * @input: AUXADC input to read.
243 */
wm831x_auxadc_read(struct wm831x * wm831x,enum wm831x_auxadc input)244 int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
245 {
246 return wm831x->auxadc_read(wm831x, input);
247 }
248 EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
249
250 /**
251 * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
252 *
253 * @wm831x: Device to read from.
254 * @input: AUXADC input to read.
255 */
wm831x_auxadc_read_uv(struct wm831x * wm831x,enum wm831x_auxadc input)256 int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
257 {
258 int ret;
259
260 ret = wm831x_auxadc_read(wm831x, input);
261 if (ret < 0)
262 return ret;
263
264 ret *= 1465;
265
266 return ret;
267 }
268 EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
269
wm831x_auxadc_init(struct wm831x * wm831x)270 void wm831x_auxadc_init(struct wm831x *wm831x)
271 {
272 int ret;
273
274 mutex_init(&wm831x->auxadc_lock);
275 INIT_LIST_HEAD(&wm831x->auxadc_pending);
276
277 if (wm831x->irq) {
278 wm831x->auxadc_read = wm831x_auxadc_read_irq;
279
280 ret = request_threaded_irq(wm831x_irq(wm831x,
281 WM831X_IRQ_AUXADC_DATA),
282 NULL, wm831x_auxadc_irq,
283 IRQF_ONESHOT,
284 "auxadc", wm831x);
285 if (ret < 0) {
286 dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
287 ret);
288 wm831x->auxadc_read = NULL;
289 }
290 }
291
292 if (!wm831x->auxadc_read)
293 wm831x->auxadc_read = wm831x_auxadc_read_polled;
294 }
295