1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/hwmon/lis3lv02d_i2c.c
4  *
5  * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer.
6  * Driver is based on corresponding SPI driver written by Daniel Mack
7  * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ).
8  *
9  * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
10  *
11  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
12  */
13 
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/err.h>
17 #include <linux/i2c.h>
18 #include <linux/pm_runtime.h>
19 #include <linux/delay.h>
20 #include <linux/of.h>
21 #include <linux/of_platform.h>
22 #include <linux/of_device.h>
23 
24 #include "lis3lv02d.h"
25 
26 #define DRV_NAME	"lis3lv02d_i2c"
27 
28 static const char reg_vdd[]    = "Vdd";
29 static const char reg_vdd_io[] = "Vdd_IO";
30 
lis3_reg_ctrl(struct lis3lv02d * lis3,bool state)31 static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state)
32 {
33 	int ret;
34 	if (state == LIS3_REG_OFF) {
35 		ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators),
36 					lis3->regulators);
37 	} else {
38 		ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators),
39 					lis3->regulators);
40 		/* Chip needs time to wakeup. Not mentioned in datasheet */
41 		usleep_range(10000, 20000);
42 	}
43 	return ret;
44 }
45 
lis3_i2c_write(struct lis3lv02d * lis3,int reg,u8 value)46 static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
47 {
48 	struct i2c_client *c = lis3->bus_priv;
49 	return i2c_smbus_write_byte_data(c, reg, value);
50 }
51 
lis3_i2c_read(struct lis3lv02d * lis3,int reg,u8 * v)52 static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
53 {
54 	struct i2c_client *c = lis3->bus_priv;
55 	*v = i2c_smbus_read_byte_data(c, reg);
56 	return 0;
57 }
58 
lis3_i2c_blockread(struct lis3lv02d * lis3,int reg,int len,u8 * v)59 static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len,
60 				u8 *v)
61 {
62 	struct i2c_client *c = lis3->bus_priv;
63 	reg |= (1 << 7); /* 7th bit enables address auto incrementation */
64 	return i2c_smbus_read_i2c_block_data(c, reg, len, v);
65 }
66 
lis3_i2c_init(struct lis3lv02d * lis3)67 static int lis3_i2c_init(struct lis3lv02d *lis3)
68 {
69 	u8 reg;
70 	int ret;
71 
72 	lis3_reg_ctrl(lis3, LIS3_REG_ON);
73 
74 	lis3->read(lis3, WHO_AM_I, &reg);
75 	if (reg != lis3->whoami)
76 		printk(KERN_ERR "lis3: power on failure\n");
77 
78 	/* power up the device */
79 	ret = lis3->read(lis3, CTRL_REG1, &reg);
80 	if (ret < 0)
81 		return ret;
82 
83 	if (lis3->whoami == WAI_3DLH)
84 		reg |= CTRL1_PM0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
85 	else
86 		reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
87 
88 	return lis3->write(lis3, CTRL_REG1, reg);
89 }
90 
91 /* Default axis mapping but it can be overwritten by platform data */
92 static union axis_conversion lis3lv02d_axis_map =
93 	{ .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } };
94 
95 #ifdef CONFIG_OF
96 static const struct of_device_id lis3lv02d_i2c_dt_ids[] = {
97 	{ .compatible = "st,lis3lv02d" },
98 	{}
99 };
100 MODULE_DEVICE_TABLE(of, lis3lv02d_i2c_dt_ids);
101 #endif
102 
lis3lv02d_i2c_probe(struct i2c_client * client,const struct i2c_device_id * id)103 static int lis3lv02d_i2c_probe(struct i2c_client *client,
104 					const struct i2c_device_id *id)
105 {
106 	int ret = 0;
107 	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
108 
109 #ifdef CONFIG_OF
110 	if (of_match_device(lis3lv02d_i2c_dt_ids, &client->dev)) {
111 		lis3_dev.of_node = client->dev.of_node;
112 		ret = lis3lv02d_init_dt(&lis3_dev);
113 		if (ret)
114 			return ret;
115 		pdata = lis3_dev.pdata;
116 	}
117 #endif
118 
119 	if (pdata) {
120 		if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
121 			(i2c_check_functionality(client->adapter,
122 						I2C_FUNC_SMBUS_I2C_BLOCK)))
123 			lis3_dev.blkread  = lis3_i2c_blockread;
124 
125 		if (pdata->axis_x)
126 			lis3lv02d_axis_map.x = pdata->axis_x;
127 
128 		if (pdata->axis_y)
129 			lis3lv02d_axis_map.y = pdata->axis_y;
130 
131 		if (pdata->axis_z)
132 			lis3lv02d_axis_map.z = pdata->axis_z;
133 
134 		if (pdata->setup_resources)
135 			ret = pdata->setup_resources();
136 
137 		if (ret)
138 			goto fail;
139 	}
140 
141 	lis3_dev.regulators[0].supply = reg_vdd;
142 	lis3_dev.regulators[1].supply = reg_vdd_io;
143 	ret = regulator_bulk_get(&client->dev,
144 				 ARRAY_SIZE(lis3_dev.regulators),
145 				 lis3_dev.regulators);
146 	if (ret < 0)
147 		goto fail;
148 
149 	lis3_dev.pdata	  = pdata;
150 	lis3_dev.bus_priv = client;
151 	lis3_dev.init	  = lis3_i2c_init;
152 	lis3_dev.read	  = lis3_i2c_read;
153 	lis3_dev.write	  = lis3_i2c_write;
154 	lis3_dev.irq	  = client->irq;
155 	lis3_dev.ac	  = lis3lv02d_axis_map;
156 	lis3_dev.pm_dev	  = &client->dev;
157 
158 	i2c_set_clientdata(client, &lis3_dev);
159 
160 	/* Provide power over the init call */
161 	lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
162 
163 	ret = lis3lv02d_init_device(&lis3_dev);
164 
165 	lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
166 
167 	if (ret)
168 		goto fail2;
169 	return 0;
170 
171 fail2:
172 	regulator_bulk_free(ARRAY_SIZE(lis3_dev.regulators),
173 				lis3_dev.regulators);
174 fail:
175 	if (pdata && pdata->release_resources)
176 		pdata->release_resources();
177 	return ret;
178 }
179 
lis3lv02d_i2c_remove(struct i2c_client * client)180 static int lis3lv02d_i2c_remove(struct i2c_client *client)
181 {
182 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
183 	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
184 
185 	if (pdata && pdata->release_resources)
186 		pdata->release_resources();
187 
188 	lis3lv02d_joystick_disable(lis3);
189 	lis3lv02d_remove_fs(&lis3_dev);
190 
191 	regulator_bulk_free(ARRAY_SIZE(lis3->regulators),
192 			    lis3_dev.regulators);
193 	return 0;
194 }
195 
196 #ifdef CONFIG_PM_SLEEP
lis3lv02d_i2c_suspend(struct device * dev)197 static int lis3lv02d_i2c_suspend(struct device *dev)
198 {
199 	struct i2c_client *client = to_i2c_client(dev);
200 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
201 
202 	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
203 		lis3lv02d_poweroff(lis3);
204 	return 0;
205 }
206 
lis3lv02d_i2c_resume(struct device * dev)207 static int lis3lv02d_i2c_resume(struct device *dev)
208 {
209 	struct i2c_client *client = to_i2c_client(dev);
210 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
211 
212 	/*
213 	 * pm_runtime documentation says that devices should always
214 	 * be powered on at resume. Pm_runtime turns them off after system
215 	 * wide resume is complete.
216 	 */
217 	if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
218 		pm_runtime_suspended(dev))
219 		lis3lv02d_poweron(lis3);
220 
221 	return 0;
222 }
223 #endif /* CONFIG_PM_SLEEP */
224 
225 #ifdef CONFIG_PM
lis3_i2c_runtime_suspend(struct device * dev)226 static int lis3_i2c_runtime_suspend(struct device *dev)
227 {
228 	struct i2c_client *client = to_i2c_client(dev);
229 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
230 
231 	lis3lv02d_poweroff(lis3);
232 	return 0;
233 }
234 
lis3_i2c_runtime_resume(struct device * dev)235 static int lis3_i2c_runtime_resume(struct device *dev)
236 {
237 	struct i2c_client *client = to_i2c_client(dev);
238 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
239 
240 	lis3lv02d_poweron(lis3);
241 	return 0;
242 }
243 #endif /* CONFIG_PM */
244 
245 static const struct i2c_device_id lis3lv02d_id[] = {
246 	{"lis3lv02d", LIS3LV02D},
247 	{"lis331dlh", LIS331DLH},
248 	{}
249 };
250 
251 MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
252 
253 static const struct dev_pm_ops lis3_pm_ops = {
254 	SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend,
255 				lis3lv02d_i2c_resume)
256 	SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend,
257 			   lis3_i2c_runtime_resume,
258 			   NULL)
259 };
260 
261 static struct i2c_driver lis3lv02d_i2c_driver = {
262 	.driver	 = {
263 		.name   = DRV_NAME,
264 		.pm     = &lis3_pm_ops,
265 		.of_match_table = of_match_ptr(lis3lv02d_i2c_dt_ids),
266 	},
267 	.probe	= lis3lv02d_i2c_probe,
268 	.remove	= lis3lv02d_i2c_remove,
269 	.id_table = lis3lv02d_id,
270 };
271 
272 module_i2c_driver(lis3lv02d_i2c_driver);
273 
274 MODULE_AUTHOR("Nokia Corporation");
275 MODULE_DESCRIPTION("lis3lv02d I2C interface");
276 MODULE_LICENSE("GPL");
277