1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Atmel SDMMC controller driver.
4 *
5 * Copyright (C) 2015 Atmel,
6 * 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
7 */
8
9 #include <linux/bitfield.h>
10 #include <linux/clk.h>
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/io.h>
14 #include <linux/iopoll.h>
15 #include <linux/kernel.h>
16 #include <linux/mmc/host.h>
17 #include <linux/mmc/slot-gpio.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/of_device.h>
21 #include <linux/pm.h>
22 #include <linux/pm_runtime.h>
23
24 #include "sdhci-pltfm.h"
25
26 #define SDMMC_MC1R 0x204
27 #define SDMMC_MC1R_DDR BIT(3)
28 #define SDMMC_MC1R_FCD BIT(7)
29 #define SDMMC_CACR 0x230
30 #define SDMMC_CACR_CAPWREN BIT(0)
31 #define SDMMC_CACR_KEY (0x46 << 8)
32 #define SDMMC_CALCR 0x240
33 #define SDMMC_CALCR_EN BIT(0)
34 #define SDMMC_CALCR_ALWYSON BIT(4)
35
36 #define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */
37
38 struct sdhci_at91_soc_data {
39 const struct sdhci_pltfm_data *pdata;
40 bool baseclk_is_generated_internally;
41 unsigned int divider_for_baseclk;
42 };
43
44 struct sdhci_at91_priv {
45 const struct sdhci_at91_soc_data *soc_data;
46 struct clk *hclock;
47 struct clk *gck;
48 struct clk *mainck;
49 bool restore_needed;
50 bool cal_always_on;
51 };
52
sdhci_at91_set_force_card_detect(struct sdhci_host * host)53 static void sdhci_at91_set_force_card_detect(struct sdhci_host *host)
54 {
55 u8 mc1r;
56
57 mc1r = readb(host->ioaddr + SDMMC_MC1R);
58 mc1r |= SDMMC_MC1R_FCD;
59 writeb(mc1r, host->ioaddr + SDMMC_MC1R);
60 }
61
sdhci_at91_set_clock(struct sdhci_host * host,unsigned int clock)62 static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
63 {
64 u16 clk;
65
66 host->mmc->actual_clock = 0;
67
68 /*
69 * There is no requirement to disable the internal clock before
70 * changing the SD clock configuration. Moreover, disabling the
71 * internal clock, changing the configuration and re-enabling the
72 * internal clock causes some bugs. It can prevent to get the internal
73 * clock stable flag ready and an unexpected switch to the base clock
74 * when using presets.
75 */
76 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
77 clk &= SDHCI_CLOCK_INT_EN;
78 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
79
80 if (clock == 0)
81 return;
82
83 clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
84
85 clk |= SDHCI_CLOCK_INT_EN;
86 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
87
88 /* Wait max 20 ms */
89 if (read_poll_timeout(sdhci_readw, clk, (clk & SDHCI_CLOCK_INT_STABLE),
90 1000, 20000, false, host, SDHCI_CLOCK_CONTROL)) {
91 pr_err("%s: Internal clock never stabilised.\n",
92 mmc_hostname(host->mmc));
93 return;
94 }
95
96 clk |= SDHCI_CLOCK_CARD_EN;
97 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
98 }
99
sdhci_at91_set_uhs_signaling(struct sdhci_host * host,unsigned int timing)100 static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host,
101 unsigned int timing)
102 {
103 if (timing == MMC_TIMING_MMC_DDR52)
104 sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R);
105 sdhci_set_uhs_signaling(host, timing);
106 }
107
sdhci_at91_reset(struct sdhci_host * host,u8 mask)108 static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
109 {
110 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
111 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
112 unsigned int tmp;
113
114 sdhci_reset(host, mask);
115
116 if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
117 || mmc_gpio_get_cd(host->mmc) >= 0)
118 sdhci_at91_set_force_card_detect(host);
119
120 if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) {
121 u32 calcr = sdhci_readl(host, SDMMC_CALCR);
122
123 sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN,
124 SDMMC_CALCR);
125
126 if (read_poll_timeout(sdhci_readl, tmp, !(tmp & SDMMC_CALCR_EN),
127 10, 20000, false, host, SDMMC_CALCR))
128 dev_err(mmc_dev(host->mmc), "Failed to calibrate\n");
129 }
130 }
131
132 static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
133 .set_clock = sdhci_at91_set_clock,
134 .set_bus_width = sdhci_set_bus_width,
135 .reset = sdhci_at91_reset,
136 .set_uhs_signaling = sdhci_at91_set_uhs_signaling,
137 .set_power = sdhci_set_power_and_bus_voltage,
138 };
139
140 static const struct sdhci_pltfm_data sdhci_sama5d2_pdata = {
141 .ops = &sdhci_at91_sama5d2_ops,
142 };
143
144 static const struct sdhci_at91_soc_data soc_data_sama5d2 = {
145 .pdata = &sdhci_sama5d2_pdata,
146 .baseclk_is_generated_internally = false,
147 };
148
149 static const struct sdhci_at91_soc_data soc_data_sam9x60 = {
150 .pdata = &sdhci_sama5d2_pdata,
151 .baseclk_is_generated_internally = true,
152 .divider_for_baseclk = 2,
153 };
154
155 static const struct of_device_id sdhci_at91_dt_match[] = {
156 { .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 },
157 { .compatible = "microchip,sam9x60-sdhci", .data = &soc_data_sam9x60 },
158 {}
159 };
160 MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match);
161
sdhci_at91_set_clks_presets(struct device * dev)162 static int sdhci_at91_set_clks_presets(struct device *dev)
163 {
164 struct sdhci_host *host = dev_get_drvdata(dev);
165 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
166 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
167 unsigned int caps0, caps1;
168 unsigned int clk_base, clk_mul;
169 unsigned int gck_rate, clk_base_rate;
170 unsigned int preset_div;
171
172 clk_prepare_enable(priv->hclock);
173 caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
174 caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
175
176 gck_rate = clk_get_rate(priv->gck);
177 if (priv->soc_data->baseclk_is_generated_internally)
178 clk_base_rate = gck_rate / priv->soc_data->divider_for_baseclk;
179 else
180 clk_base_rate = clk_get_rate(priv->mainck);
181
182 clk_base = clk_base_rate / 1000000;
183 clk_mul = gck_rate / clk_base_rate - 1;
184
185 caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK;
186 caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base);
187 caps1 &= ~SDHCI_CLOCK_MUL_MASK;
188 caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul);
189 /* Set capabilities in r/w mode. */
190 writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
191 writel(caps0, host->ioaddr + SDHCI_CAPABILITIES);
192 writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
193 /* Set capabilities in ro mode. */
194 writel(0, host->ioaddr + SDMMC_CACR);
195
196 dev_dbg(dev, "update clk mul to %u as gck rate is %u Hz and clk base is %u Hz\n",
197 clk_mul, gck_rate, clk_base_rate);
198
199 /*
200 * We have to set preset values because it depends on the clk_mul
201 * value. Moreover, SDR104 is supported in a degraded mode since the
202 * maximum sd clock value is 120 MHz instead of 208 MHz. For that
203 * reason, we need to use presets to support SDR104.
204 */
205 preset_div = DIV_ROUND_UP(gck_rate, 24000000) - 1;
206 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
207 host->ioaddr + SDHCI_PRESET_FOR_SDR12);
208 preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1;
209 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
210 host->ioaddr + SDHCI_PRESET_FOR_SDR25);
211 preset_div = DIV_ROUND_UP(gck_rate, 100000000) - 1;
212 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
213 host->ioaddr + SDHCI_PRESET_FOR_SDR50);
214 preset_div = DIV_ROUND_UP(gck_rate, 120000000) - 1;
215 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
216 host->ioaddr + SDHCI_PRESET_FOR_SDR104);
217 preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1;
218 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
219 host->ioaddr + SDHCI_PRESET_FOR_DDR50);
220
221 clk_prepare_enable(priv->mainck);
222 clk_prepare_enable(priv->gck);
223
224 return 0;
225 }
226
227 #ifdef CONFIG_PM_SLEEP
sdhci_at91_suspend(struct device * dev)228 static int sdhci_at91_suspend(struct device *dev)
229 {
230 struct sdhci_host *host = dev_get_drvdata(dev);
231 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
232 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
233 int ret;
234
235 ret = pm_runtime_force_suspend(dev);
236
237 priv->restore_needed = true;
238
239 return ret;
240 }
241 #endif /* CONFIG_PM_SLEEP */
242
243 #ifdef CONFIG_PM
sdhci_at91_runtime_suspend(struct device * dev)244 static int sdhci_at91_runtime_suspend(struct device *dev)
245 {
246 struct sdhci_host *host = dev_get_drvdata(dev);
247 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
248 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
249 int ret;
250
251 ret = sdhci_runtime_suspend_host(host);
252
253 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
254 mmc_retune_needed(host->mmc);
255
256 clk_disable_unprepare(priv->gck);
257 clk_disable_unprepare(priv->hclock);
258 clk_disable_unprepare(priv->mainck);
259
260 return ret;
261 }
262
sdhci_at91_runtime_resume(struct device * dev)263 static int sdhci_at91_runtime_resume(struct device *dev)
264 {
265 struct sdhci_host *host = dev_get_drvdata(dev);
266 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
267 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
268 int ret;
269
270 if (priv->restore_needed) {
271 ret = sdhci_at91_set_clks_presets(dev);
272 if (ret)
273 return ret;
274
275 priv->restore_needed = false;
276 goto out;
277 }
278
279 ret = clk_prepare_enable(priv->mainck);
280 if (ret) {
281 dev_err(dev, "can't enable mainck\n");
282 return ret;
283 }
284
285 ret = clk_prepare_enable(priv->hclock);
286 if (ret) {
287 dev_err(dev, "can't enable hclock\n");
288 return ret;
289 }
290
291 ret = clk_prepare_enable(priv->gck);
292 if (ret) {
293 dev_err(dev, "can't enable gck\n");
294 return ret;
295 }
296
297 out:
298 return sdhci_runtime_resume_host(host, 0);
299 }
300 #endif /* CONFIG_PM */
301
302 static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
303 SET_SYSTEM_SLEEP_PM_OPS(sdhci_at91_suspend, pm_runtime_force_resume)
304 SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
305 sdhci_at91_runtime_resume,
306 NULL)
307 };
308
sdhci_at91_probe(struct platform_device * pdev)309 static int sdhci_at91_probe(struct platform_device *pdev)
310 {
311 const struct of_device_id *match;
312 const struct sdhci_at91_soc_data *soc_data;
313 struct sdhci_host *host;
314 struct sdhci_pltfm_host *pltfm_host;
315 struct sdhci_at91_priv *priv;
316 int ret;
317
318 match = of_match_device(sdhci_at91_dt_match, &pdev->dev);
319 if (!match)
320 return -EINVAL;
321 soc_data = match->data;
322
323 host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*priv));
324 if (IS_ERR(host))
325 return PTR_ERR(host);
326
327 pltfm_host = sdhci_priv(host);
328 priv = sdhci_pltfm_priv(pltfm_host);
329 priv->soc_data = soc_data;
330
331 priv->mainck = devm_clk_get(&pdev->dev, "baseclk");
332 if (IS_ERR(priv->mainck)) {
333 if (soc_data->baseclk_is_generated_internally) {
334 priv->mainck = NULL;
335 } else {
336 dev_err(&pdev->dev, "failed to get baseclk\n");
337 ret = PTR_ERR(priv->mainck);
338 goto sdhci_pltfm_free;
339 }
340 }
341
342 priv->hclock = devm_clk_get(&pdev->dev, "hclock");
343 if (IS_ERR(priv->hclock)) {
344 dev_err(&pdev->dev, "failed to get hclock\n");
345 ret = PTR_ERR(priv->hclock);
346 goto sdhci_pltfm_free;
347 }
348
349 priv->gck = devm_clk_get(&pdev->dev, "multclk");
350 if (IS_ERR(priv->gck)) {
351 dev_err(&pdev->dev, "failed to get multclk\n");
352 ret = PTR_ERR(priv->gck);
353 goto sdhci_pltfm_free;
354 }
355
356 ret = sdhci_at91_set_clks_presets(&pdev->dev);
357 if (ret)
358 goto sdhci_pltfm_free;
359
360 priv->restore_needed = false;
361
362 /*
363 * if SDCAL pin is wrongly connected, we must enable
364 * the analog calibration cell permanently.
365 */
366 priv->cal_always_on =
367 device_property_read_bool(&pdev->dev,
368 "microchip,sdcal-inverted");
369
370 ret = mmc_of_parse(host->mmc);
371 if (ret)
372 goto clocks_disable_unprepare;
373
374 sdhci_get_of_property(pdev);
375
376 pm_runtime_get_noresume(&pdev->dev);
377 pm_runtime_set_active(&pdev->dev);
378 pm_runtime_enable(&pdev->dev);
379 pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
380 pm_runtime_use_autosuspend(&pdev->dev);
381
382 /* HS200 is broken at this moment */
383 host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
384
385 ret = sdhci_add_host(host);
386 if (ret)
387 goto pm_runtime_disable;
388
389 /*
390 * When calling sdhci_runtime_suspend_host(), the sdhci layer makes
391 * the assumption that all the clocks of the controller are disabled.
392 * It means we can't get irq from it when it is runtime suspended.
393 * For that reason, it is not planned to wake-up on a card detect irq
394 * from the controller.
395 * If we want to use runtime PM and to be able to wake-up on card
396 * insertion, we have to use a GPIO for the card detection or we can
397 * use polling. Be aware that using polling will resume/suspend the
398 * controller between each attempt.
399 * Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries
400 * to enable polling via device tree with broken-cd property.
401 */
402 if (mmc_card_is_removable(host->mmc) &&
403 mmc_gpio_get_cd(host->mmc) < 0) {
404 host->mmc->caps |= MMC_CAP_NEEDS_POLL;
405 host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
406 }
407
408 /*
409 * If the device attached to the MMC bus is not removable, it is safer
410 * to set the Force Card Detect bit. People often don't connect the
411 * card detect signal and use this pin for another purpose. If the card
412 * detect pin is not muxed to SDHCI controller, a default value is
413 * used. This value can be different from a SoC revision to another
414 * one. Problems come when this default value is not card present. To
415 * avoid this case, if the device is non removable then the card
416 * detection procedure using the SDMCC_CD signal is bypassed.
417 * This bit is reset when a software reset for all command is performed
418 * so we need to implement our own reset function to set back this bit.
419 *
420 * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
421 */
422 if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
423 || mmc_gpio_get_cd(host->mmc) >= 0)
424 sdhci_at91_set_force_card_detect(host);
425
426 pm_runtime_put_autosuspend(&pdev->dev);
427
428 return 0;
429
430 pm_runtime_disable:
431 pm_runtime_disable(&pdev->dev);
432 pm_runtime_set_suspended(&pdev->dev);
433 pm_runtime_put_noidle(&pdev->dev);
434 clocks_disable_unprepare:
435 clk_disable_unprepare(priv->gck);
436 clk_disable_unprepare(priv->mainck);
437 clk_disable_unprepare(priv->hclock);
438 sdhci_pltfm_free:
439 sdhci_pltfm_free(pdev);
440 return ret;
441 }
442
sdhci_at91_remove(struct platform_device * pdev)443 static int sdhci_at91_remove(struct platform_device *pdev)
444 {
445 struct sdhci_host *host = platform_get_drvdata(pdev);
446 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
447 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
448 struct clk *gck = priv->gck;
449 struct clk *hclock = priv->hclock;
450 struct clk *mainck = priv->mainck;
451
452 pm_runtime_get_sync(&pdev->dev);
453 pm_runtime_disable(&pdev->dev);
454 pm_runtime_put_noidle(&pdev->dev);
455
456 sdhci_pltfm_unregister(pdev);
457
458 clk_disable_unprepare(gck);
459 clk_disable_unprepare(hclock);
460 clk_disable_unprepare(mainck);
461
462 return 0;
463 }
464
465 static struct platform_driver sdhci_at91_driver = {
466 .driver = {
467 .name = "sdhci-at91",
468 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
469 .of_match_table = sdhci_at91_dt_match,
470 .pm = &sdhci_at91_dev_pm_ops,
471 },
472 .probe = sdhci_at91_probe,
473 .remove = sdhci_at91_remove,
474 };
475
476 module_platform_driver(sdhci_at91_driver);
477
478 MODULE_DESCRIPTION("SDHCI driver for at91");
479 MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
480 MODULE_LICENSE("GPL v2");
481