1 /* sun3lance.c: Ethernet driver for SUN3 Lance chip */
2 /*
3 
4   Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
5   This driver is a part of the linux kernel, and is thus distributed
6   under the GNU General Public License.
7 
8   The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
9   true for the correct IRQ and address of the lance registers.  They
10   have not been widely tested, however.  What we probably need is a
11   "proper" way to search for a device in the sun3's prom, but, alas,
12   linux has no such thing.
13 
14   This driver is largely based on atarilance.c, by Roman Hodek.  Other
15   sources of inspiration were the NetBSD sun3 am7990 driver, and the
16   linux sparc lance driver (sunlance.c).
17 
18   There are more assumptions made throughout this driver, it almost
19   certainly still needs work, but it does work at least for RARP/BOOTP and
20   mounting the root NFS filesystem.
21 
22 */
23 
24 static const char version[] =
25 "sun3lance.c: v1.2 1/12/2001  Sam Creasey (sammy@sammy.net)\n";
26 
27 #include <linux/module.h>
28 #include <linux/stddef.h>
29 #include <linux/kernel.h>
30 #include <linux/string.h>
31 #include <linux/errno.h>
32 #include <linux/interrupt.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
35 #include <linux/delay.h>
36 #include <linux/netdevice.h>
37 #include <linux/etherdevice.h>
38 #include <linux/skbuff.h>
39 #include <linux/bitops.h>
40 #include <linux/pgtable.h>
41 
42 #include <asm/cacheflush.h>
43 #include <asm/setup.h>
44 #include <asm/irq.h>
45 #include <asm/io.h>
46 #include <asm/dvma.h>
47 #include <asm/idprom.h>
48 #include <asm/machines.h>
49 
50 #ifdef CONFIG_SUN3
51 #include <asm/sun3mmu.h>
52 #else
53 #include <asm/sun3xprom.h>
54 #endif
55 
56 /* sun3/60 addr/irq for the lance chip.  If your sun is different,
57    change this. */
58 #define LANCE_OBIO 0x120000
59 #define LANCE_IRQ IRQ_AUTO_3
60 
61 /* Debug level:
62  *  0 = silent, print only serious errors
63  *  1 = normal, print error messages
64  *  2 = debug, print debug infos
65  *  3 = debug, print even more debug infos (packet data)
66  */
67 
68 #define	LANCE_DEBUG	0
69 
70 #ifdef LANCE_DEBUG
71 static int lance_debug = LANCE_DEBUG;
72 #else
73 static int lance_debug = 1;
74 #endif
75 module_param(lance_debug, int, 0);
76 MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)");
77 MODULE_LICENSE("GPL");
78 
79 #define	DPRINTK(n,a) \
80 	do {  \
81 		if (lance_debug >= n)  \
82 			printk a; \
83 	} while( 0 )
84 
85 
86 /* we're only using 32k of memory, so we use 4 TX
87    buffers and 16 RX buffers.  These values are expressed as log2. */
88 
89 #define TX_LOG_RING_SIZE			3
90 #define RX_LOG_RING_SIZE			5
91 
92 /* These are the derived values */
93 
94 #define TX_RING_SIZE			(1 << TX_LOG_RING_SIZE)
95 #define TX_RING_LEN_BITS		(TX_LOG_RING_SIZE << 5)
96 #define	TX_RING_MOD_MASK		(TX_RING_SIZE - 1)
97 
98 #define RX_RING_SIZE			(1 << RX_LOG_RING_SIZE)
99 #define RX_RING_LEN_BITS		(RX_LOG_RING_SIZE << 5)
100 #define	RX_RING_MOD_MASK		(RX_RING_SIZE - 1)
101 
102 /* Definitions for packet buffer access: */
103 #define PKT_BUF_SZ		1544
104 
105 /* Get the address of a packet buffer corresponding to a given buffer head */
106 #define	PKTBUF_ADDR(head)	(void *)((unsigned long)(MEM) | (head)->base)
107 
108 
109 /* The LANCE Rx and Tx ring descriptors. */
110 struct lance_rx_head {
111 	unsigned short	base;		/* Low word of base addr */
112 	volatile unsigned char	flag;
113 	unsigned char  base_hi;	/* High word of base addr (unused) */
114 	short buf_length;	/* This length is 2s complement! */
115 	volatile short msg_length;	/* This length is "normal". */
116 };
117 
118 struct lance_tx_head {
119 	unsigned short base;		/* Low word of base addr */
120 	volatile unsigned char	flag;
121 	unsigned char base_hi;	/* High word of base addr (unused) */
122 	short length;		/* Length is 2s complement! */
123 	volatile short misc;
124 };
125 
126 /* The LANCE initialization block, described in databook. */
127 struct lance_init_block {
128 	unsigned short	mode;		/* Pre-set mode */
129 	unsigned char	hwaddr[6];	/* Physical ethernet address */
130 	unsigned int    filter[2];	/* Multicast filter (unused). */
131 	/* Receive and transmit ring base, along with length bits. */
132 	unsigned short rdra;
133 	unsigned short rlen;
134 	unsigned short tdra;
135 	unsigned short tlen;
136 	unsigned short pad[4]; /* is thie needed? */
137 };
138 
139 /* The whole layout of the Lance shared memory */
140 struct lance_memory {
141 	struct lance_init_block	init;
142 	struct lance_tx_head	tx_head[TX_RING_SIZE];
143 	struct lance_rx_head	rx_head[RX_RING_SIZE];
144 	char   rx_data[RX_RING_SIZE][PKT_BUF_SZ];
145 	char   tx_data[TX_RING_SIZE][PKT_BUF_SZ];
146 };
147 
148 /* The driver's private device structure */
149 
150 struct lance_private {
151 	volatile unsigned short	*iobase;
152 	struct lance_memory	*mem;
153 	int new_rx, new_tx;	/* The next free ring entry */
154 	int old_tx, old_rx;     /* ring entry to be processed */
155 /* These two must be longs for set_bit() */
156 	long	    tx_full;
157 	long	    lock;
158 };
159 
160 /* I/O register access macros */
161 
162 #define	MEM	lp->mem
163 #define	DREG	lp->iobase[0]
164 #define	AREG	lp->iobase[1]
165 #define	REGA(a)	(*( AREG = (a), &DREG ))
166 
167 /* Definitions for the Lance */
168 
169 /* tx_head flags */
170 #define TMD1_ENP		0x01	/* end of packet */
171 #define TMD1_STP		0x02	/* start of packet */
172 #define TMD1_DEF		0x04	/* deferred */
173 #define TMD1_ONE		0x08	/* one retry needed */
174 #define TMD1_MORE		0x10	/* more than one retry needed */
175 #define TMD1_ERR		0x40	/* error summary */
176 #define TMD1_OWN 		0x80	/* ownership (set: chip owns) */
177 
178 #define TMD1_OWN_CHIP	TMD1_OWN
179 #define TMD1_OWN_HOST	0
180 
181 /* tx_head misc field */
182 #define TMD3_TDR		0x03FF	/* Time Domain Reflectometry counter */
183 #define TMD3_RTRY		0x0400	/* failed after 16 retries */
184 #define TMD3_LCAR		0x0800	/* carrier lost */
185 #define TMD3_LCOL		0x1000	/* late collision */
186 #define TMD3_UFLO		0x4000	/* underflow (late memory) */
187 #define TMD3_BUFF		0x8000	/* buffering error (no ENP) */
188 
189 /* rx_head flags */
190 #define RMD1_ENP		0x01	/* end of packet */
191 #define RMD1_STP		0x02	/* start of packet */
192 #define RMD1_BUFF		0x04	/* buffer error */
193 #define RMD1_CRC		0x08	/* CRC error */
194 #define RMD1_OFLO		0x10	/* overflow */
195 #define RMD1_FRAM		0x20	/* framing error */
196 #define RMD1_ERR		0x40	/* error summary */
197 #define RMD1_OWN 		0x80	/* ownership (set: ship owns) */
198 
199 #define RMD1_OWN_CHIP	RMD1_OWN
200 #define RMD1_OWN_HOST	0
201 
202 /* register names */
203 #define CSR0	0		/* mode/status */
204 #define CSR1	1		/* init block addr (low) */
205 #define CSR2	2		/* init block addr (high) */
206 #define CSR3	3		/* misc */
207 #define CSR8	8	  	/* address filter */
208 #define CSR15	15		/* promiscuous mode */
209 
210 /* CSR0 */
211 /* (R=readable, W=writeable, S=set on write, C=clear on write) */
212 #define CSR0_INIT	0x0001		/* initialize (RS) */
213 #define CSR0_STRT	0x0002		/* start (RS) */
214 #define CSR0_STOP	0x0004		/* stop (RS) */
215 #define CSR0_TDMD	0x0008		/* transmit demand (RS) */
216 #define CSR0_TXON	0x0010		/* transmitter on (R) */
217 #define CSR0_RXON	0x0020		/* receiver on (R) */
218 #define CSR0_INEA	0x0040		/* interrupt enable (RW) */
219 #define CSR0_INTR	0x0080		/* interrupt active (R) */
220 #define CSR0_IDON	0x0100		/* initialization done (RC) */
221 #define CSR0_TINT	0x0200		/* transmitter interrupt (RC) */
222 #define CSR0_RINT	0x0400		/* receiver interrupt (RC) */
223 #define CSR0_MERR	0x0800		/* memory error (RC) */
224 #define CSR0_MISS	0x1000		/* missed frame (RC) */
225 #define CSR0_CERR	0x2000		/* carrier error (no heartbeat :-) (RC) */
226 #define CSR0_BABL	0x4000		/* babble: tx-ed too many bits (RC) */
227 #define CSR0_ERR	0x8000		/* error (RC) */
228 
229 /* CSR3 */
230 #define CSR3_BCON	0x0001		/* byte control */
231 #define CSR3_ACON	0x0002		/* ALE control */
232 #define CSR3_BSWP	0x0004		/* byte swap (1=big endian) */
233 
234 /***************************** Prototypes *****************************/
235 
236 static int lance_probe( struct net_device *dev);
237 static int lance_open( struct net_device *dev );
238 static void lance_init_ring( struct net_device *dev );
239 static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
240 				    struct net_device *dev);
241 static irqreturn_t lance_interrupt( int irq, void *dev_id);
242 static int lance_rx( struct net_device *dev );
243 static int lance_close( struct net_device *dev );
244 static void set_multicast_list( struct net_device *dev );
245 
246 /************************* End of Prototypes **************************/
247 
sun3lance_probe(void)248 static struct net_device * __init sun3lance_probe(void)
249 {
250 	struct net_device *dev;
251 	static int found;
252 	int err = -ENODEV;
253 
254 	if (!MACH_IS_SUN3 && !MACH_IS_SUN3X)
255 		return ERR_PTR(-ENODEV);
256 
257 	/* check that this machine has an onboard lance */
258 	switch(idprom->id_machtype) {
259 	case SM_SUN3|SM_3_50:
260 	case SM_SUN3|SM_3_60:
261 	case SM_SUN3X|SM_3_80:
262 		/* these machines have lance */
263 		break;
264 
265 	default:
266 		return ERR_PTR(-ENODEV);
267 	}
268 
269 	if (found)
270 		return ERR_PTR(-ENODEV);
271 
272 	dev = alloc_etherdev(sizeof(struct lance_private));
273 	if (!dev)
274 		return ERR_PTR(-ENOMEM);
275 
276 	if (!lance_probe(dev))
277 		goto out;
278 
279 	err = register_netdev(dev);
280 	if (err)
281 		goto out1;
282 	found = 1;
283 	return dev;
284 
285 out1:
286 #ifdef CONFIG_SUN3
287 	iounmap((void __iomem *)dev->base_addr);
288 #endif
289 out:
290 	free_netdev(dev);
291 	return ERR_PTR(err);
292 }
293 
294 static const struct net_device_ops lance_netdev_ops = {
295 	.ndo_open		= lance_open,
296 	.ndo_stop		= lance_close,
297 	.ndo_start_xmit		= lance_start_xmit,
298 	.ndo_set_rx_mode	= set_multicast_list,
299 	.ndo_set_mac_address	= NULL,
300 	.ndo_validate_addr	= eth_validate_addr,
301 };
302 
lance_probe(struct net_device * dev)303 static int __init lance_probe( struct net_device *dev)
304 {
305 	unsigned long ioaddr;
306 
307 	struct lance_private	*lp;
308 	static int 		did_version;
309 	volatile unsigned short *ioaddr_probe;
310 	unsigned short tmp1, tmp2;
311 
312 #ifdef CONFIG_SUN3
313 	ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE);
314 	if (!ioaddr)
315 		return 0;
316 #else
317 	ioaddr = SUN3X_LANCE;
318 #endif
319 
320 	/* test to see if there's really a lance here */
321 	/* (CSRO_INIT shouldn't be readable) */
322 
323 	ioaddr_probe = (volatile unsigned short *)ioaddr;
324 	tmp1 = ioaddr_probe[0];
325 	tmp2 = ioaddr_probe[1];
326 
327 	ioaddr_probe[1] = CSR0;
328 	ioaddr_probe[0] = CSR0_INIT | CSR0_STOP;
329 
330 	if(ioaddr_probe[0] != CSR0_STOP) {
331 		ioaddr_probe[0] = tmp1;
332 		ioaddr_probe[1] = tmp2;
333 
334 #ifdef CONFIG_SUN3
335 		iounmap((void __iomem *)ioaddr);
336 #endif
337 		return 0;
338 	}
339 
340 	lp = netdev_priv(dev);
341 
342 	/* XXX - leak? */
343 	MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
344 	if (MEM == NULL) {
345 #ifdef CONFIG_SUN3
346 		iounmap((void __iomem *)ioaddr);
347 #endif
348 		printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n");
349 		return 0;
350 	}
351 
352 	lp->iobase = (volatile unsigned short *)ioaddr;
353 	dev->base_addr = (unsigned long)ioaddr; /* informational only */
354 
355 	REGA(CSR0) = CSR0_STOP;
356 
357 	if (request_irq(LANCE_IRQ, lance_interrupt, 0, "SUN3 Lance", dev) < 0) {
358 #ifdef CONFIG_SUN3
359 		iounmap((void __iomem *)ioaddr);
360 #endif
361 		dvma_free((void *)MEM);
362 		printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n");
363 		return 0;
364 	}
365 	dev->irq = (unsigned short)LANCE_IRQ;
366 
367 
368 	printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
369 		   dev->name,
370 		   (unsigned long)ioaddr,
371 		   (unsigned long)MEM,
372 		   dev->irq);
373 
374 	/* copy in the ethernet address from the prom */
375 	eth_hw_addr_set(dev, idprom->id_ethaddr);
376 
377 	/* tell the card it's ether address, bytes swapped */
378 	MEM->init.hwaddr[0] = dev->dev_addr[1];
379 	MEM->init.hwaddr[1] = dev->dev_addr[0];
380 	MEM->init.hwaddr[2] = dev->dev_addr[3];
381 	MEM->init.hwaddr[3] = dev->dev_addr[2];
382 	MEM->init.hwaddr[4] = dev->dev_addr[5];
383 	MEM->init.hwaddr[5] = dev->dev_addr[4];
384 
385 	printk("%pM\n", dev->dev_addr);
386 
387 	MEM->init.mode = 0x0000;
388 	MEM->init.filter[0] = 0x00000000;
389 	MEM->init.filter[1] = 0x00000000;
390 	MEM->init.rdra = dvma_vtob(MEM->rx_head);
391 	MEM->init.rlen    = (RX_LOG_RING_SIZE << 13) |
392 		(dvma_vtob(MEM->rx_head) >> 16);
393 	MEM->init.tdra = dvma_vtob(MEM->tx_head);
394 	MEM->init.tlen    = (TX_LOG_RING_SIZE << 13) |
395 		(dvma_vtob(MEM->tx_head) >> 16);
396 
397 	DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
398 	       dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head),
399 	       (dvma_vtob(MEM->tx_head))));
400 
401 	if (did_version++ == 0)
402 		printk( version );
403 
404 	dev->netdev_ops = &lance_netdev_ops;
405 //	KLUDGE -- REMOVE ME
406 	set_bit(__LINK_STATE_PRESENT, &dev->state);
407 
408 
409 	return 1;
410 }
411 
lance_open(struct net_device * dev)412 static int lance_open( struct net_device *dev )
413 {
414 	struct lance_private *lp = netdev_priv(dev);
415 	int i;
416 
417 	DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
418 
419 	REGA(CSR0) = CSR0_STOP;
420 
421 	lance_init_ring(dev);
422 
423 	/* From now on, AREG is kept to point to CSR0 */
424 	REGA(CSR0) = CSR0_INIT;
425 
426 	i = 1000000;
427 	while (--i > 0)
428 		if (DREG & CSR0_IDON)
429 			break;
430 	if (i <= 0 || (DREG & CSR0_ERR)) {
431 		DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
432 					  dev->name, i, DREG ));
433 		DREG = CSR0_STOP;
434 		return -EIO;
435 	}
436 
437 	DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA;
438 
439 	netif_start_queue(dev);
440 
441 	DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
442 
443 	return 0;
444 }
445 
446 
447 /* Initialize the LANCE Rx and Tx rings. */
448 
lance_init_ring(struct net_device * dev)449 static void lance_init_ring( struct net_device *dev )
450 {
451 	struct lance_private *lp = netdev_priv(dev);
452 	int i;
453 
454 	lp->lock = 0;
455 	lp->tx_full = 0;
456 	lp->new_rx = lp->new_tx = 0;
457 	lp->old_rx = lp->old_tx = 0;
458 
459 	for( i = 0; i < TX_RING_SIZE; i++ ) {
460 		MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
461 		MEM->tx_head[i].flag = 0;
462 		MEM->tx_head[i].base_hi =
463 			(dvma_vtob(MEM->tx_data[i])) >>16;
464 		MEM->tx_head[i].length = 0;
465 		MEM->tx_head[i].misc = 0;
466 	}
467 
468 	for( i = 0; i < RX_RING_SIZE; i++ ) {
469 		MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]);
470 		MEM->rx_head[i].flag = RMD1_OWN_CHIP;
471 		MEM->rx_head[i].base_hi =
472 			(dvma_vtob(MEM->rx_data[i])) >> 16;
473 		MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000;
474 		MEM->rx_head[i].msg_length = 0;
475 	}
476 
477 	/* tell the card it's ether address, bytes swapped */
478 	MEM->init.hwaddr[0] = dev->dev_addr[1];
479 	MEM->init.hwaddr[1] = dev->dev_addr[0];
480 	MEM->init.hwaddr[2] = dev->dev_addr[3];
481 	MEM->init.hwaddr[3] = dev->dev_addr[2];
482 	MEM->init.hwaddr[4] = dev->dev_addr[5];
483 	MEM->init.hwaddr[5] = dev->dev_addr[4];
484 
485 	MEM->init.mode = 0x0000;
486 	MEM->init.filter[0] = 0x00000000;
487 	MEM->init.filter[1] = 0x00000000;
488 	MEM->init.rdra = dvma_vtob(MEM->rx_head);
489 	MEM->init.rlen    = (RX_LOG_RING_SIZE << 13) |
490 		(dvma_vtob(MEM->rx_head) >> 16);
491 	MEM->init.tdra = dvma_vtob(MEM->tx_head);
492 	MEM->init.tlen    = (TX_LOG_RING_SIZE << 13) |
493 		(dvma_vtob(MEM->tx_head) >> 16);
494 
495 
496 	/* tell the lance the address of its init block */
497 	REGA(CSR1) = dvma_vtob(&(MEM->init));
498 	REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16;
499 
500 #ifdef CONFIG_SUN3X
501 	REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON;
502 #else
503 	REGA(CSR3) = CSR3_BSWP;
504 #endif
505 
506 }
507 
508 
509 static netdev_tx_t
lance_start_xmit(struct sk_buff * skb,struct net_device * dev)510 lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
511 {
512 	struct lance_private *lp = netdev_priv(dev);
513 	int entry, len;
514 	struct lance_tx_head *head;
515 	unsigned long flags;
516 
517 	DPRINTK( 1, ( "%s: transmit start.\n",
518 		      dev->name));
519 
520 	/* Transmitter timeout, serious problems. */
521 	if (netif_queue_stopped(dev)) {
522 		int tickssofar = jiffies - dev_trans_start(dev);
523 		if (tickssofar < HZ/5)
524 			return NETDEV_TX_BUSY;
525 
526 		DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
527 					  dev->name, DREG ));
528 		DREG = CSR0_STOP;
529 		/*
530 		 * Always set BSWP after a STOP as STOP puts it back into
531 		 * little endian mode.
532 		 */
533 		REGA(CSR3) = CSR3_BSWP;
534 		dev->stats.tx_errors++;
535 
536 		if(lance_debug >= 2) {
537 			int i;
538 			printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
539 			       lp->old_tx, lp->new_tx,
540 			       lp->tx_full ? " (full)" : "",
541 			       lp->new_rx );
542 			for( i = 0 ; i < RX_RING_SIZE; i++ )
543 				printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
544 					i, MEM->rx_head[i].base,
545 					-MEM->rx_head[i].buf_length,
546 					MEM->rx_head[i].msg_length);
547 			for( i = 0 ; i < TX_RING_SIZE; i++ )
548 				printk("tx #%d: base=%04x len=%04x misc=%04x\n",
549 				       i, MEM->tx_head[i].base,
550 				       -MEM->tx_head[i].length,
551 				       MEM->tx_head[i].misc );
552 		}
553 
554 		lance_init_ring(dev);
555 		REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
556 
557 		netif_start_queue(dev);
558 
559 		return NETDEV_TX_OK;
560 	}
561 
562 
563 	/* Block a timer-based transmit from overlapping.  This could better be
564 	   done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
565 
566 	/* Block a timer-based transmit from overlapping with us by
567 	   stopping the queue for a bit... */
568 
569 	netif_stop_queue(dev);
570 
571 	if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
572 		printk( "%s: tx queue lock!.\n", dev->name);
573 		/* don't clear dev->tbusy flag. */
574 		return NETDEV_TX_BUSY;
575 	}
576 
577 	AREG = CSR0;
578 	DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
579 				  dev->name, DREG ));
580 
581 #ifdef CONFIG_SUN3X
582 	/* this weirdness doesn't appear on sun3... */
583 	if(!(DREG & CSR0_INIT)) {
584 		DPRINTK( 1, ("INIT not set, reinitializing...\n"));
585 		REGA( CSR0 ) = CSR0_STOP;
586 		lance_init_ring(dev);
587 		REGA( CSR0 ) = CSR0_INIT | CSR0_STRT;
588 	}
589 #endif
590 
591 	/* Fill in a Tx ring entry */
592 #if 0
593 	if (lance_debug >= 2) {
594 		printk( "%s: TX pkt %d type 0x%04x"
595 			" from %s to %s"
596 			" data at 0x%08x len %d\n",
597 			dev->name, lp->new_tx, ((u_short *)skb->data)[6],
598 			DEV_ADDR(&skb->data[6]), DEV_ADDR(skb->data),
599 			(int)skb->data, (int)skb->len );
600 	}
601 #endif
602 	/* We're not prepared for the int until the last flags are set/reset.
603 	 * And the int may happen already after setting the OWN_CHIP... */
604 	local_irq_save(flags);
605 
606 	/* Mask to ring buffer boundary. */
607 	entry = lp->new_tx;
608 	head  = &(MEM->tx_head[entry]);
609 
610 	/* Caution: the write order is important here, set the "ownership" bits
611 	 * last.
612 	 */
613 
614 	/* the sun3's lance needs it's buffer padded to the minimum
615 	   size */
616 	len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
617 
618 //	head->length = -len;
619 	head->length = (-len) | 0xf000;
620 	head->misc = 0;
621 
622 	skb_copy_from_linear_data(skb, PKTBUF_ADDR(head), skb->len);
623 	if (len != skb->len)
624 		memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len);
625 
626 	head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
627 	lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK;
628 	dev->stats.tx_bytes += skb->len;
629 
630 	/* Trigger an immediate send poll. */
631 	REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
632 	AREG = CSR0;
633 	DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
634 				  dev->name, DREG ));
635 	dev_kfree_skb(skb);
636 
637 	lp->lock = 0;
638 	if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
639 	    TMD1_OWN_HOST)
640 		netif_start_queue(dev);
641 
642 	local_irq_restore(flags);
643 
644 	return NETDEV_TX_OK;
645 }
646 
647 /* The LANCE interrupt handler. */
648 
lance_interrupt(int irq,void * dev_id)649 static irqreturn_t lance_interrupt( int irq, void *dev_id)
650 {
651 	struct net_device *dev = dev_id;
652 	struct lance_private *lp = netdev_priv(dev);
653 	int csr0;
654 
655  still_more:
656 	flush_cache_all();
657 
658 	AREG = CSR0;
659 	csr0 = DREG;
660 
661 	/* ack interrupts */
662 	DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON);
663 
664 	/* clear errors */
665 	if(csr0 & CSR0_ERR)
666 		DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS;
667 
668 
669 	DPRINTK( 2, ( "%s: interrupt  csr0=%04x new csr=%04x.\n",
670 		      dev->name, csr0, DREG ));
671 
672 	if (csr0 & CSR0_TINT) {			/* Tx-done interrupt */
673 		int old_tx = lp->old_tx;
674 
675 //		if(lance_debug >= 3) {
676 //			int i;
677 //
678 //			printk("%s: tx int\n", dev->name);
679 //
680 //			for(i = 0; i < TX_RING_SIZE; i++)
681 //				printk("ring %d flag=%04x\n", i,
682 //				       MEM->tx_head[i].flag);
683 //		}
684 
685 		while( old_tx != lp->new_tx) {
686 			struct lance_tx_head *head = &(MEM->tx_head[old_tx]);
687 
688 			DPRINTK(3, ("on tx_ring %d\n", old_tx));
689 
690 			if (head->flag & TMD1_OWN_CHIP)
691 				break; /* It still hasn't been Txed */
692 
693 			if (head->flag & TMD1_ERR) {
694 				int status = head->misc;
695 				dev->stats.tx_errors++;
696 				if (status & TMD3_RTRY) dev->stats.tx_aborted_errors++;
697 				if (status & TMD3_LCAR) dev->stats.tx_carrier_errors++;
698 				if (status & TMD3_LCOL) dev->stats.tx_window_errors++;
699 				if (status & (TMD3_UFLO | TMD3_BUFF)) {
700 					dev->stats.tx_fifo_errors++;
701 					printk("%s: Tx FIFO error\n",
702 					       dev->name);
703 					REGA(CSR0) = CSR0_STOP;
704 					REGA(CSR3) = CSR3_BSWP;
705 					lance_init_ring(dev);
706 					REGA(CSR0) = CSR0_STRT | CSR0_INEA;
707 					return IRQ_HANDLED;
708 				}
709 			} else if(head->flag & (TMD1_ENP | TMD1_STP)) {
710 
711 				head->flag &= ~(TMD1_ENP | TMD1_STP);
712 				if(head->flag & (TMD1_ONE | TMD1_MORE))
713 					dev->stats.collisions++;
714 
715 				dev->stats.tx_packets++;
716 				DPRINTK(3, ("cleared tx ring %d\n", old_tx));
717 			}
718 			old_tx = (old_tx +1) & TX_RING_MOD_MASK;
719 		}
720 
721 		lp->old_tx = old_tx;
722 	}
723 
724 
725 	if (netif_queue_stopped(dev)) {
726 		/* The ring is no longer full, clear tbusy. */
727 		netif_start_queue(dev);
728 		netif_wake_queue(dev);
729 	}
730 
731 	if (csr0 & CSR0_RINT)			/* Rx interrupt */
732 		lance_rx( dev );
733 
734 	/* Log misc errors. */
735 	if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */
736 	if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */
737 	if (csr0 & CSR0_MERR) {
738 		DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
739 			      "status %04x.\n", dev->name, csr0 ));
740 		/* Restart the chip. */
741 		REGA(CSR0) = CSR0_STOP;
742 		REGA(CSR3) = CSR3_BSWP;
743 		lance_init_ring(dev);
744 		REGA(CSR0) = CSR0_STRT | CSR0_INEA;
745 	}
746 
747 
748     /* Clear any other interrupt, and set interrupt enable. */
749 //	DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
750 //		   CSR0_IDON | CSR0_INEA;
751 
752 	REGA(CSR0) = CSR0_INEA;
753 
754 	if(DREG & (CSR0_RINT | CSR0_TINT)) {
755 	     DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG));
756 	     goto still_more;
757 	}
758 
759 	DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
760 				  dev->name, DREG ));
761 	return IRQ_HANDLED;
762 }
763 
764 /* get packet, toss into skbuff */
lance_rx(struct net_device * dev)765 static int lance_rx( struct net_device *dev )
766 {
767 	struct lance_private *lp = netdev_priv(dev);
768 	int entry = lp->new_rx;
769 
770 	/* If we own the next entry, it's a new packet. Send it up. */
771 	while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
772 		struct lance_rx_head *head = &(MEM->rx_head[entry]);
773 		int status = head->flag;
774 
775 		if (status != (RMD1_ENP|RMD1_STP)) {  /* There was an error. */
776 			/* There is a tricky error noted by John Murphy,
777 			   <murf@perftech.com> to Russ Nelson: Even with
778 			   full-sized buffers it's possible for a jabber packet to use two
779 			   buffers, with only the last correctly noting the error. */
780 			if (status & RMD1_ENP)	/* Only count a general error at the */
781 				dev->stats.rx_errors++; /* end of a packet.*/
782 			if (status & RMD1_FRAM) dev->stats.rx_frame_errors++;
783 			if (status & RMD1_OFLO) dev->stats.rx_over_errors++;
784 			if (status & RMD1_CRC) dev->stats.rx_crc_errors++;
785 			if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++;
786 			head->flag &= (RMD1_ENP|RMD1_STP);
787 		} else {
788 			/* Malloc up new buffer, compatible with net-3. */
789 //			short pkt_len = head->msg_length;// & 0xfff;
790 			short pkt_len = (head->msg_length & 0xfff) - 4;
791 			struct sk_buff *skb;
792 
793 			if (pkt_len < 60) {
794 				printk( "%s: Runt packet!\n", dev->name );
795 				dev->stats.rx_errors++;
796 			}
797 			else {
798 				skb = netdev_alloc_skb(dev, pkt_len + 2);
799 				if (skb == NULL) {
800 					dev->stats.rx_dropped++;
801 					head->msg_length = 0;
802 					head->flag |= RMD1_OWN_CHIP;
803 					lp->new_rx = (lp->new_rx+1) &
804 					     RX_RING_MOD_MASK;
805 				}
806 
807 #if 0
808 				if (lance_debug >= 3) {
809 					u_char *data = PKTBUF_ADDR(head);
810 					printk("%s: RX pkt %d type 0x%04x"
811 					       " from %pM to %pM",
812 					       dev->name, lp->new_tx, ((u_short *)data)[6],
813 					       &data[6], data);
814 
815 					printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
816 					       "len %d at %08x\n",
817 					       data[15], data[16], data[17], data[18],
818 					       data[19], data[20], data[21], data[22],
819 					       pkt_len, data);
820 				}
821 #endif
822 				if (lance_debug >= 3) {
823 					u_char *data = PKTBUF_ADDR(head);
824 					printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
825 				}
826 
827 
828 				skb_reserve( skb, 2 );	/* 16 byte align */
829 				skb_put( skb, pkt_len );	/* Make room */
830 				skb_copy_to_linear_data(skb,
831 						 PKTBUF_ADDR(head),
832 						 pkt_len);
833 
834 				skb->protocol = eth_type_trans( skb, dev );
835 				netif_rx( skb );
836 				dev->stats.rx_packets++;
837 				dev->stats.rx_bytes += pkt_len;
838 			}
839 		}
840 
841 //		head->buf_length = -PKT_BUF_SZ | 0xf000;
842 		head->msg_length = 0;
843 		head->flag = RMD1_OWN_CHIP;
844 
845 		entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK;
846 	}
847 
848 	/* From lance.c (Donald Becker): */
849 	/* We should check that at least two ring entries are free.
850 	   If not, we should free one and mark stats->rx_dropped++. */
851 
852 	return 0;
853 }
854 
855 
lance_close(struct net_device * dev)856 static int lance_close( struct net_device *dev )
857 {
858 	struct lance_private *lp = netdev_priv(dev);
859 
860 	netif_stop_queue(dev);
861 
862 	AREG = CSR0;
863 
864 	DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
865 				  dev->name, DREG ));
866 
867 	/* We stop the LANCE here -- it occasionally polls
868 	   memory if we don't. */
869 	DREG = CSR0_STOP;
870 	return 0;
871 }
872 
873 
874 /* Set or clear the multicast filter for this adaptor.
875    num_addrs == -1		Promiscuous mode, receive all packets
876    num_addrs == 0		Normal mode, clear multicast list
877    num_addrs > 0		Multicast mode, receive normal and MC packets, and do
878 						best-effort filtering.
879  */
880 
881 /* completely untested on a sun3 */
set_multicast_list(struct net_device * dev)882 static void set_multicast_list( struct net_device *dev )
883 {
884 	struct lance_private *lp = netdev_priv(dev);
885 
886 	if(netif_queue_stopped(dev))
887 		/* Only possible if board is already started */
888 		return;
889 
890 	/* We take the simple way out and always enable promiscuous mode. */
891 	DREG = CSR0_STOP; /* Temporarily stop the lance. */
892 
893 	if (dev->flags & IFF_PROMISC) {
894 		/* Log any net taps. */
895 		DPRINTK( 3, ( "%s: Promiscuous mode enabled.\n", dev->name ));
896 		REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
897 	} else {
898 		short multicast_table[4];
899 		int num_addrs = netdev_mc_count(dev);
900 		int i;
901 		/* We don't use the multicast table, but rely on upper-layer
902 		 * filtering. */
903 		memset( multicast_table, (num_addrs == 0) ? 0 : -1,
904 				sizeof(multicast_table) );
905 		for( i = 0; i < 4; i++ )
906 			REGA( CSR8+i ) = multicast_table[i];
907 		REGA( CSR15 ) = 0; /* Unset promiscuous mode */
908 	}
909 
910 	/*
911 	 * Always set BSWP after a STOP as STOP puts it back into
912 	 * little endian mode.
913 	 */
914 	REGA( CSR3 ) = CSR3_BSWP;
915 
916 	/* Resume normal operation and reset AREG to CSR0 */
917 	REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
918 }
919 
920 
921 static struct net_device *sun3lance_dev;
922 
sun3lance_init(void)923 static int __init sun3lance_init(void)
924 {
925 	sun3lance_dev = sun3lance_probe();
926 	return PTR_ERR_OR_ZERO(sun3lance_dev);
927 }
928 module_init(sun3lance_init);
929 
sun3lance_cleanup(void)930 static void __exit sun3lance_cleanup(void)
931 {
932 	unregister_netdev(sun3lance_dev);
933 #ifdef CONFIG_SUN3
934 	iounmap((void __iomem *)sun3lance_dev->base_addr);
935 #endif
936 	free_netdev(sun3lance_dev);
937 }
938 module_exit(sun3lance_cleanup);
939