1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2020, Loongson Corporation
3 */
4
5 #include <linux/clk-provider.h>
6 #include <linux/pci.h>
7 #include <linux/dmi.h>
8 #include <linux/device.h>
9 #include <linux/of_irq.h>
10 #include "stmmac.h"
11
loongson_default_data(struct plat_stmmacenet_data * plat)12 static int loongson_default_data(struct plat_stmmacenet_data *plat)
13 {
14 plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
15 plat->has_gmac = 1;
16 plat->force_sf_dma_mode = 1;
17
18 /* Set default value for multicast hash bins */
19 plat->multicast_filter_bins = HASH_TABLE_SIZE;
20
21 /* Set default value for unicast filter entries */
22 plat->unicast_filter_entries = 1;
23
24 /* Set the maxmtu to a default of JUMBO_LEN */
25 plat->maxmtu = JUMBO_LEN;
26
27 /* Set default number of RX and TX queues to use */
28 plat->tx_queues_to_use = 1;
29 plat->rx_queues_to_use = 1;
30
31 /* Disable Priority config by default */
32 plat->tx_queues_cfg[0].use_prio = false;
33 plat->rx_queues_cfg[0].use_prio = false;
34
35 /* Disable RX queues routing by default */
36 plat->rx_queues_cfg[0].pkt_route = 0x0;
37
38 /* Default to phy auto-detection */
39 plat->phy_addr = -1;
40
41 plat->dma_cfg->pbl = 32;
42 plat->dma_cfg->pblx8 = true;
43
44 plat->multicast_filter_bins = 256;
45 return 0;
46 }
47
loongson_dwmac_probe(struct pci_dev * pdev,const struct pci_device_id * id)48 static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
49 {
50 struct plat_stmmacenet_data *plat;
51 struct stmmac_resources res;
52 struct device_node *np;
53 int ret, i, phy_mode;
54 bool mdio = false;
55
56 np = dev_of_node(&pdev->dev);
57
58 if (!np) {
59 pr_info("dwmac_loongson_pci: No OF node\n");
60 return -ENODEV;
61 }
62
63 if (!of_device_is_compatible(np, "loongson, pci-gmac")) {
64 pr_info("dwmac_loongson_pci: Incompatible OF node\n");
65 return -ENODEV;
66 }
67
68 plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
69 if (!plat)
70 return -ENOMEM;
71
72 if (plat->mdio_node) {
73 dev_err(&pdev->dev, "Found MDIO subnode\n");
74 mdio = true;
75 }
76
77 if (mdio) {
78 plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
79 sizeof(*plat->mdio_bus_data),
80 GFP_KERNEL);
81 if (!plat->mdio_bus_data)
82 return -ENOMEM;
83 plat->mdio_bus_data->needs_reset = true;
84 }
85
86 plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
87 if (!plat->dma_cfg)
88 return -ENOMEM;
89
90 /* Enable pci device */
91 ret = pci_enable_device(pdev);
92 if (ret) {
93 dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__);
94 return ret;
95 }
96
97 /* Get the base address of device */
98 for (i = 0; i < PCI_STD_NUM_BARS; i++) {
99 if (pci_resource_len(pdev, i) == 0)
100 continue;
101 ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
102 if (ret)
103 return ret;
104 break;
105 }
106
107 plat->bus_id = of_alias_get_id(np, "ethernet");
108 if (plat->bus_id < 0)
109 plat->bus_id = pci_dev_id(pdev);
110
111 phy_mode = device_get_phy_mode(&pdev->dev);
112 if (phy_mode < 0) {
113 dev_err(&pdev->dev, "phy_mode not found\n");
114 return phy_mode;
115 }
116
117 plat->phy_interface = phy_mode;
118 plat->interface = PHY_INTERFACE_MODE_GMII;
119
120 pci_set_master(pdev);
121
122 loongson_default_data(plat);
123 pci_enable_msi(pdev);
124 memset(&res, 0, sizeof(res));
125 res.addr = pcim_iomap_table(pdev)[0];
126
127 res.irq = of_irq_get_byname(np, "macirq");
128 if (res.irq < 0) {
129 dev_err(&pdev->dev, "IRQ macirq not found\n");
130 ret = -ENODEV;
131 }
132
133 res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
134 if (res.wol_irq < 0) {
135 dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
136 res.wol_irq = res.irq;
137 }
138
139 res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
140 if (res.lpi_irq < 0) {
141 dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
142 ret = -ENODEV;
143 }
144
145 return stmmac_dvr_probe(&pdev->dev, plat, &res);
146 }
147
loongson_dwmac_remove(struct pci_dev * pdev)148 static void loongson_dwmac_remove(struct pci_dev *pdev)
149 {
150 int i;
151
152 stmmac_dvr_remove(&pdev->dev);
153
154 for (i = 0; i < PCI_STD_NUM_BARS; i++) {
155 if (pci_resource_len(pdev, i) == 0)
156 continue;
157 pcim_iounmap_regions(pdev, BIT(i));
158 break;
159 }
160
161 pci_disable_device(pdev);
162 }
163
loongson_dwmac_suspend(struct device * dev)164 static int __maybe_unused loongson_dwmac_suspend(struct device *dev)
165 {
166 struct pci_dev *pdev = to_pci_dev(dev);
167 int ret;
168
169 ret = stmmac_suspend(dev);
170 if (ret)
171 return ret;
172
173 ret = pci_save_state(pdev);
174 if (ret)
175 return ret;
176
177 pci_disable_device(pdev);
178 pci_wake_from_d3(pdev, true);
179 return 0;
180 }
181
loongson_dwmac_resume(struct device * dev)182 static int __maybe_unused loongson_dwmac_resume(struct device *dev)
183 {
184 struct pci_dev *pdev = to_pci_dev(dev);
185 int ret;
186
187 pci_restore_state(pdev);
188 pci_set_power_state(pdev, PCI_D0);
189
190 ret = pci_enable_device(pdev);
191 if (ret)
192 return ret;
193
194 pci_set_master(pdev);
195
196 return stmmac_resume(dev);
197 }
198
199 static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
200 loongson_dwmac_resume);
201
202 static const struct pci_device_id loongson_dwmac_id_table[] = {
203 { PCI_VDEVICE(LOONGSON, 0x7a03) },
204 {}
205 };
206 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
207
208 struct pci_driver loongson_dwmac_driver = {
209 .name = "dwmac-loongson-pci",
210 .id_table = loongson_dwmac_id_table,
211 .probe = loongson_dwmac_probe,
212 .remove = loongson_dwmac_remove,
213 .driver = {
214 .pm = &loongson_dwmac_pm_ops,
215 },
216 };
217
218 module_pci_driver(loongson_dwmac_driver);
219
220 MODULE_DESCRIPTION("Loongson DWMAC PCI driver");
221 MODULE_AUTHOR("Qing Zhang <zhangqing@loongson.cn>");
222 MODULE_LICENSE("GPL v2");
223