1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * This file is part of wl1251
4 *
5 * Copyright (C) 2008 Nokia Corporation
6 */
7
8 #include <linux/interrupt.h>
9 #include <linux/irq.h>
10 #include <linux/module.h>
11 #include <linux/slab.h>
12 #include <linux/swab.h>
13 #include <linux/crc7.h>
14 #include <linux/spi/spi.h>
15 #include <linux/wl12xx.h>
16 #include <linux/gpio.h>
17 #include <linux/of.h>
18 #include <linux/of_gpio.h>
19 #include <linux/regulator/consumer.h>
20
21 #include "wl1251.h"
22 #include "reg.h"
23 #include "spi.h"
24
wl1251_irq(int irq,void * cookie)25 static irqreturn_t wl1251_irq(int irq, void *cookie)
26 {
27 struct wl1251 *wl;
28
29 wl1251_debug(DEBUG_IRQ, "IRQ");
30
31 wl = cookie;
32
33 ieee80211_queue_work(wl->hw, &wl->irq_work);
34
35 return IRQ_HANDLED;
36 }
37
wl_to_spi(struct wl1251 * wl)38 static struct spi_device *wl_to_spi(struct wl1251 *wl)
39 {
40 return wl->if_priv;
41 }
42
wl1251_spi_reset(struct wl1251 * wl)43 static void wl1251_spi_reset(struct wl1251 *wl)
44 {
45 u8 *cmd;
46 struct spi_transfer t;
47 struct spi_message m;
48
49 cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
50 if (!cmd) {
51 wl1251_error("could not allocate cmd for spi reset");
52 return;
53 }
54
55 memset(&t, 0, sizeof(t));
56 spi_message_init(&m);
57
58 memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
59
60 t.tx_buf = cmd;
61 t.len = WSPI_INIT_CMD_LEN;
62 spi_message_add_tail(&t, &m);
63
64 spi_sync(wl_to_spi(wl), &m);
65
66 wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
67
68 kfree(cmd);
69 }
70
wl1251_spi_wake(struct wl1251 * wl)71 static void wl1251_spi_wake(struct wl1251 *wl)
72 {
73 struct spi_transfer t;
74 struct spi_message m;
75 u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
76
77 if (!cmd) {
78 wl1251_error("could not allocate cmd for spi init");
79 return;
80 }
81
82 memset(&t, 0, sizeof(t));
83 spi_message_init(&m);
84
85 /* Set WSPI_INIT_COMMAND
86 * the data is being send from the MSB to LSB
87 */
88 cmd[0] = 0xff;
89 cmd[1] = 0xff;
90 cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
91 cmd[3] = 0;
92 cmd[4] = 0;
93 cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
94 cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
95
96 cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
97 | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
98
99 if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
100 cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
101 else
102 cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
103
104 cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END;
105 /*
106 * The above is the logical order; it must actually be stored
107 * in the buffer byte-swapped.
108 */
109 __swab32s((u32 *)cmd);
110 __swab32s((u32 *)cmd+1);
111
112 t.tx_buf = cmd;
113 t.len = WSPI_INIT_CMD_LEN;
114 spi_message_add_tail(&t, &m);
115
116 spi_sync(wl_to_spi(wl), &m);
117
118 wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
119
120 kfree(cmd);
121 }
122
wl1251_spi_reset_wake(struct wl1251 * wl)123 static void wl1251_spi_reset_wake(struct wl1251 *wl)
124 {
125 wl1251_spi_reset(wl);
126 wl1251_spi_wake(wl);
127 }
128
wl1251_spi_read(struct wl1251 * wl,int addr,void * buf,size_t len)129 static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
130 size_t len)
131 {
132 struct spi_transfer t[3];
133 struct spi_message m;
134 u8 *busy_buf;
135 u32 *cmd;
136
137 cmd = &wl->buffer_cmd;
138 busy_buf = wl->buffer_busyword;
139
140 *cmd = 0;
141 *cmd |= WSPI_CMD_READ;
142 *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
143 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
144
145 spi_message_init(&m);
146 memset(t, 0, sizeof(t));
147
148 t[0].tx_buf = cmd;
149 t[0].len = 4;
150 spi_message_add_tail(&t[0], &m);
151
152 /* Busy and non busy words read */
153 t[1].rx_buf = busy_buf;
154 t[1].len = WL1251_BUSY_WORD_LEN;
155 spi_message_add_tail(&t[1], &m);
156
157 t[2].rx_buf = buf;
158 t[2].len = len;
159 spi_message_add_tail(&t[2], &m);
160
161 spi_sync(wl_to_spi(wl), &m);
162
163 /* FIXME: check busy words */
164
165 wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
166 wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
167 }
168
wl1251_spi_write(struct wl1251 * wl,int addr,void * buf,size_t len)169 static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
170 size_t len)
171 {
172 struct spi_transfer t[2];
173 struct spi_message m;
174 u32 *cmd;
175
176 cmd = &wl->buffer_cmd;
177
178 *cmd = 0;
179 *cmd |= WSPI_CMD_WRITE;
180 *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
181 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
182
183 spi_message_init(&m);
184 memset(t, 0, sizeof(t));
185
186 t[0].tx_buf = cmd;
187 t[0].len = sizeof(*cmd);
188 spi_message_add_tail(&t[0], &m);
189
190 t[1].tx_buf = buf;
191 t[1].len = len;
192 spi_message_add_tail(&t[1], &m);
193
194 spi_sync(wl_to_spi(wl), &m);
195
196 wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
197 wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
198 }
199
wl1251_spi_enable_irq(struct wl1251 * wl)200 static void wl1251_spi_enable_irq(struct wl1251 *wl)
201 {
202 return enable_irq(wl->irq);
203 }
204
wl1251_spi_disable_irq(struct wl1251 * wl)205 static void wl1251_spi_disable_irq(struct wl1251 *wl)
206 {
207 return disable_irq(wl->irq);
208 }
209
wl1251_spi_set_power(struct wl1251 * wl,bool enable)210 static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
211 {
212 if (gpio_is_valid(wl->power_gpio))
213 gpio_set_value(wl->power_gpio, enable);
214
215 return 0;
216 }
217
218 static const struct wl1251_if_operations wl1251_spi_ops = {
219 .read = wl1251_spi_read,
220 .write = wl1251_spi_write,
221 .reset = wl1251_spi_reset_wake,
222 .enable_irq = wl1251_spi_enable_irq,
223 .disable_irq = wl1251_spi_disable_irq,
224 .power = wl1251_spi_set_power,
225 };
226
wl1251_spi_probe(struct spi_device * spi)227 static int wl1251_spi_probe(struct spi_device *spi)
228 {
229 struct wl1251_platform_data *pdata = dev_get_platdata(&spi->dev);
230 struct device_node *np = spi->dev.of_node;
231 struct ieee80211_hw *hw;
232 struct wl1251 *wl;
233 int ret;
234
235 if (!np && !pdata) {
236 wl1251_error("no platform data");
237 return -ENODEV;
238 }
239
240 hw = wl1251_alloc_hw();
241 if (IS_ERR(hw))
242 return PTR_ERR(hw);
243
244 wl = hw->priv;
245
246 SET_IEEE80211_DEV(hw, &spi->dev);
247 spi_set_drvdata(spi, wl);
248 wl->if_priv = spi;
249 wl->if_ops = &wl1251_spi_ops;
250
251 /* This is the only SPI value that we need to set here, the rest
252 * comes from the board-peripherals file
253 */
254 spi->bits_per_word = 32;
255
256 ret = spi_setup(spi);
257 if (ret < 0) {
258 wl1251_error("spi_setup failed");
259 goto out_free;
260 }
261
262 if (np) {
263 wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom");
264 wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0);
265 } else if (pdata) {
266 wl->power_gpio = pdata->power_gpio;
267 wl->use_eeprom = pdata->use_eeprom;
268 }
269
270 if (wl->power_gpio == -EPROBE_DEFER) {
271 ret = -EPROBE_DEFER;
272 goto out_free;
273 }
274
275 if (gpio_is_valid(wl->power_gpio)) {
276 ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
277 GPIOF_OUT_INIT_LOW, "wl1251 power");
278 if (ret) {
279 wl1251_error("Failed to request gpio: %d\n", ret);
280 goto out_free;
281 }
282 } else {
283 wl1251_error("set power gpio missing in platform data");
284 ret = -ENODEV;
285 goto out_free;
286 }
287
288 wl->irq = spi->irq;
289 if (wl->irq < 0) {
290 wl1251_error("irq missing in platform data");
291 ret = -ENODEV;
292 goto out_free;
293 }
294
295 irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
296 ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0,
297 DRIVER_NAME, wl);
298 if (ret < 0) {
299 wl1251_error("request_irq() failed: %d", ret);
300 goto out_free;
301 }
302
303 irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
304
305 wl->vio = devm_regulator_get(&spi->dev, "vio");
306 if (IS_ERR(wl->vio)) {
307 ret = PTR_ERR(wl->vio);
308 wl1251_error("vio regulator missing: %d", ret);
309 goto out_free;
310 }
311
312 ret = regulator_enable(wl->vio);
313 if (ret)
314 goto out_free;
315
316 ret = wl1251_init_ieee80211(wl);
317 if (ret)
318 goto disable_regulator;
319
320 return 0;
321
322 disable_regulator:
323 regulator_disable(wl->vio);
324 out_free:
325 ieee80211_free_hw(hw);
326
327 return ret;
328 }
329
wl1251_spi_remove(struct spi_device * spi)330 static int wl1251_spi_remove(struct spi_device *spi)
331 {
332 struct wl1251 *wl = spi_get_drvdata(spi);
333
334 wl1251_free_hw(wl);
335 regulator_disable(wl->vio);
336
337 return 0;
338 }
339
340 static struct spi_driver wl1251_spi_driver = {
341 .driver = {
342 .name = DRIVER_NAME,
343 },
344
345 .probe = wl1251_spi_probe,
346 .remove = wl1251_spi_remove,
347 };
348
349 module_spi_driver(wl1251_spi_driver);
350
351 MODULE_LICENSE("GPL");
352 MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
353 MODULE_ALIAS("spi:wl1251");
354