1 /*
2 * Viper/Zeus PCMCIA support
3 * Copyright 2004 Arcom Control Systems
4 *
5 * Maintained by Marc Zyngier <maz@misterjones.org>
6 *
7 * Based on:
8 * iPAQ h2200 PCMCIA support
9 * Copyright 2004 Koen Kooi <koen@vestingbar.nl>
10 *
11 * This file is subject to the terms and conditions of the GNU General Public
12 * License. See the file COPYING in the main directory of this archive for
13 * more details.
14 */
15
16 #include <linux/module.h>
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/errno.h>
20 #include <linux/interrupt.h>
21 #include <linux/platform_device.h>
22 #include <linux/gpio.h>
23
24 #include <pcmcia/ss.h>
25
26 #include <asm/irq.h>
27
28 #include <linux/platform_data/pcmcia-pxa2xx_viper.h>
29
30 #include "soc_common.h"
31 #include "pxa2xx_base.h"
32
33 static struct platform_device *arcom_pcmcia_dev;
34
viper_get_pdata(void)35 static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
36 {
37 return arcom_pcmcia_dev->dev.platform_data;
38 }
39
viper_pcmcia_hw_init(struct soc_pcmcia_socket * skt)40 static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
41 {
42 struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
43 unsigned long flags;
44
45 skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio;
46 skt->stat[SOC_STAT_CD].name = "PCMCIA_CD";
47 skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio;
48 skt->stat[SOC_STAT_RDY].name = "CF ready";
49
50 if (gpio_request(pdata->pwr_gpio, "CF power"))
51 goto err_request_pwr;
52
53 local_irq_save(flags);
54
55 if (gpio_direction_output(pdata->pwr_gpio, 0)) {
56 local_irq_restore(flags);
57 goto err_dir;
58 }
59
60 local_irq_restore(flags);
61
62 return 0;
63
64 err_dir:
65 gpio_free(pdata->pwr_gpio);
66 err_request_pwr:
67 dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
68 return -1;
69 }
70
71 /*
72 * Release all resources.
73 */
viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket * skt)74 static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
75 {
76 struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
77
78 gpio_free(pdata->pwr_gpio);
79 }
80
viper_pcmcia_socket_state(struct soc_pcmcia_socket * skt,struct pcmcia_state * state)81 static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
82 struct pcmcia_state *state)
83 {
84 state->vs_3v = 1; /* Can only apply 3.3V */
85 state->vs_Xv = 0;
86 }
87
viper_pcmcia_configure_socket(struct soc_pcmcia_socket * skt,const socket_state_t * state)88 static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
89 const socket_state_t *state)
90 {
91 struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
92
93 /* Silently ignore Vpp, output enable, speaker enable. */
94 pdata->reset(state->flags & SS_RESET);
95
96 /* Apply socket voltage */
97 switch (state->Vcc) {
98 case 0:
99 gpio_set_value(pdata->pwr_gpio, 0);
100 break;
101 case 33:
102 gpio_set_value(pdata->pwr_gpio, 1);
103 break;
104 default:
105 dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
106 return -1;
107 }
108
109 return 0;
110 }
111
112 static struct pcmcia_low_level viper_pcmcia_ops = {
113 .owner = THIS_MODULE,
114 .hw_init = viper_pcmcia_hw_init,
115 .hw_shutdown = viper_pcmcia_hw_shutdown,
116 .socket_state = viper_pcmcia_socket_state,
117 .configure_socket = viper_pcmcia_configure_socket,
118 .nr = 1,
119 };
120
121 static struct platform_device *viper_pcmcia_device;
122
viper_pcmcia_probe(struct platform_device * pdev)123 static int viper_pcmcia_probe(struct platform_device *pdev)
124 {
125 int ret;
126
127 /* I can't imagine more than one device, but you never know... */
128 if (arcom_pcmcia_dev)
129 return -EEXIST;
130
131 if (!pdev->dev.platform_data)
132 return -EINVAL;
133
134 viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
135 if (!viper_pcmcia_device)
136 return -ENOMEM;
137
138 arcom_pcmcia_dev = pdev;
139
140 viper_pcmcia_device->dev.parent = &pdev->dev;
141
142 ret = platform_device_add_data(viper_pcmcia_device,
143 &viper_pcmcia_ops,
144 sizeof(viper_pcmcia_ops));
145
146 if (!ret)
147 ret = platform_device_add(viper_pcmcia_device);
148
149 if (ret) {
150 platform_device_put(viper_pcmcia_device);
151 arcom_pcmcia_dev = NULL;
152 }
153
154 return ret;
155 }
156
viper_pcmcia_remove(struct platform_device * pdev)157 static int viper_pcmcia_remove(struct platform_device *pdev)
158 {
159 platform_device_unregister(viper_pcmcia_device);
160 arcom_pcmcia_dev = NULL;
161 return 0;
162 }
163
164 static struct platform_device_id viper_pcmcia_id_table[] = {
165 { .name = "viper-pcmcia", },
166 { .name = "zeus-pcmcia", },
167 { },
168 };
169
170 static struct platform_driver viper_pcmcia_driver = {
171 .probe = viper_pcmcia_probe,
172 .remove = viper_pcmcia_remove,
173 .driver = {
174 .name = "arcom-pcmcia",
175 },
176 .id_table = viper_pcmcia_id_table,
177 };
178
179 module_platform_driver(viper_pcmcia_driver);
180
181 MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
182 MODULE_LICENSE("GPL");
183